0
RESEARCH PAPERS

Influence of Gas Turbine Combustor Design and Operating Parameters on Effectiveness of NOx Suppression by Injected Steam or Water

[+] Author and Article Information
G. L. Touchton

General Electric Company, Schenectady, NY 12345

J. Eng. Gas Turbines Power 107(3), 706-713 (Jul 01, 1985) (8 pages) doi:10.1115/1.3239792 History: Received June 05, 1984; Online October 15, 2009

Abstract

Steam or water injection has become the state-of-the-art abatement technique for NOx , with steam strongly preferred for combined-cycle application. In combined-cycle plants, the degradation of the plant efficiency due to steam injection into the gas turbine combustor provides a powerful incentive for minimizing this flow over the entire plant operating map. This paper presents the results of extensive tests carried out on a variety of gas turbine combustor designs. Both test stand and field test data are presented. The usual fuel in the tests is methane; however, some data are presented for combustion of No. 2 distillate oil and intermediate Btu gas fuel. Similarly, the usual inert injected is steam, but some water injection data are included for comparison. The results support the conclusions: 1. Steam and water injection suppress NOx exclusively through thermal mechanisms, i.e., by lowering the peak flame temperature. 2. Design changes have little effect on NOx suppression effectiveness of steam or water in jet-stirred or swirl-mixed combustors. 3. Primary zone injection of steam in methane-fueled, jet-stirred combustors is equally effective whether the steam enters with an air stream or with the fuel stream. 4. Water-to-fuel ratio corrected to equivalent energy content correlates NOx suppression effectiveness for turbulent diffusion flame combustors.

Copyright © 1985 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In