0
RESEARCH PAPERS

Analytical and Experimental Investigation of Two-Phase Flow Screw Expanders for Power Generation

[+] Author and Article Information
H. Taniguchi, K. Kudo, I. Park

Department of Mechanical Engineering, Hokkaido University, Sapporo, 060 Japan

W. H. Giedt

Department of Mechanical Engineering, University of California, Davis, CA 95616

S. Kumazawa

Mayekawa Manufacturing Co., Ltd. (MYCOM), Tokyo, 135 Japan

J. Eng. Gas Turbines Power 110(4), 628-635 (Oct 01, 1988) (8 pages) doi:10.1115/1.3240182 History: Received June 27, 1986; Online October 15, 2009

Abstract

An analytical procedure for calculating the performance of a two-phase flow screw-type expander is presented. Predicted results are compared with experimental measurements made with a recently developed prototype expander. This expander was designed for investigating the applicability of this type of machine as the expansion device in refrigeration or heat pump cycles with the objective of taking advantage of the power-producing capability of the expanding fluid. It has two rotors each with a diameter of 81.6 mm and a length of 135 mm, and was operated with Freon-12 entering at a pressure of 1.588 MPa (230.4 psia) and subcooling of between 2 and 12 K. Maximum power generated was 10 kW at a rotor speed of 3000 rpm. The internal (machine) efficiency is predicted to increase from about 30 to 70 percent as the rotor speed increases from 500 to 3000 rpm. Experimental results over this same speed range increase from 30 to 60 percent. The lower experimental values at the higher rotor speeds are attributed primarily to frictional losses not included in the analysis. Estimates of the performance of machines with larger diameter rotors yielded internal efficiencies reaching 80 percent and increases in power output proportional to the square of the rotor diameter.

Copyright © 1988 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In