What Causes Slower Flame Propagation in the Lean-Combustion Engine?

[+] Author and Article Information
T.-W. Kuo

Engine Research Department, General Motors Research Laboratories, Warren, MI 48090

J. Eng. Gas Turbines Power 112(3), 348-356 (Jul 01, 1990) (9 pages) doi:10.1115/1.2906502 History: Received January 01, 1989; Online April 24, 2008


Previous engine data suggest that slower flame propagation in lean-burn engines could be due to slower flame expansion velocity at lean conditions than at stoichiometric combustion. Two classes of model, a quasi-dimensional engine-simulation program and a multidimensional engine-flow and combustion code, were used to study this effect in detail and to assess the capabilities of the models to resolve combustion details. The computed flame-speed data from each program differed somewhat in magnitude, but the predicted trends at various equivalence ratios were quite similar. The trends include: (1) The peak in-cylinder burned-gas temperature decreases by about 300 K as the equivalence ratio is decreased from 0.98 to 0.70. (2) Both the laminar flame speed and the flame-propagation speed, the latter computed from the time derivative of flame radius, decrease with decreasing equivalence ratio. (3) The turbulent burning speed, defined as the ratio of specific fuel-burning rate to the product of the flame frontal area and unburned-mixture density, is relatively insensitive to equivalence-ratio variations at the same flame-radius position. The previous experimental finding that the reduction in flame-propagation speed with decreasing equivalence ratio is caused mainly by the lower thermal-expansion speed, calculated by subtracting the turbulent burning speed from the flame-propagation speed, was confirmed. This is a consequence of lower burned-gas temperature for the lean case. Regarding the reliability of the models to resolve the combustion details, limitations of the models are identified and discussed in detail.

Copyright © 1990 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In