0
TECHNICAL PAPERS: Power

CO2 Emission Abatement From Fossil Fuel Power Plants by Exhaust Gas Treatment

[+] Author and Article Information
M. Gambini, M. Vellini

Department of Energetic Sciences and Technologies, University of Rome “Tor Vergata,” Via del Politecnico, No. 1, 00133 Roma, Italy

J. Eng. Gas Turbines Power 125(1), 365-373 (Dec 27, 2002) (9 pages) doi:10.1115/1.1519270 History: Received September 01, 2001; Revised May 01, 2002; Online December 27, 2002
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.

References

Schütz, M., Daun, M., Weinspach, P. M., Krumbeck, M., and Hein, K. R. G., 1992, “Study on the CO2 Recovery From an IGCC Plant,” Proceedings of the First International Conference onCO2Removal, Amsterdam, Pergamon Press, New York.
Allam, R. J., and Spilsbury, C. G., 1992 “A Study of the Extraction of CO2 From the Fossil Fuel Gas of a 500 MW Pulverised Coal Fired Boiler,” Proceedings of the First Int. Conf. on CO2 Removal, Amsterdam, Pergamon Press, New York.
Chiesa, P., and Consonni, S., 1998, “Shift Reactors and Physical Absorption for Low-CO2 Emission IGCCs,” International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm.
Gambini, M., Guizzi, G. L., and Vellini, M., 1999, “New High Efficiency Mixed Cycles With Air-Blown Combustion for CO2 Emission Abatement,” Proceedings of the International Joint Power Generation Conference, San Francisco, ASME, New York.
Hendriks, C. A., Blok, K., and Turkenburg, W. C., 1989, “The Recovery of Carbon Dioxide From Power Plants,” Climate and Energy, P. A. Okken, R. J. Swart, and S. Zwerver, eds., Kluwer, Dordrecht, The Netherlands.
Yagi, K., Shibuya, H., and Sasaki, T., 1992, “Application of Chemical Absorption Process to CO2 Recovery From Flue Gas Generated in Power Plants,” Proceedings of the First International Conference on CO2 Removal, Amsterdam, Pergamon Press, New York.
Suda, T., Fujii, M., Yoshida, K., Iijima, M., Seto, T., and Mitsuoka, S., 1992, “Development of Flue Gas Carbon Dioxide Recovery Technology,” Proceedings of the First International Conference on CO2 Removal, Amsterdam, Pergamon Press, New York.
Bolland, O., and Mathieu, P., 1997, “Comparison of Two CO2 Removal Options in Combined Cycle Power Plants,” Proc. of FLOWERS’97, Florence World Energy Research Symposium, Firenze, SGE Editoriali.
Chiesa, P., and Lozza G., 1998, “CO2 Emission Abatement in IGCC Power Plants by Semiclosed Cycles. Part A: With Oxygen-Blown Combustion,” International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm.
Gambini, M., and Guizzi, G. L., 1997, “Parametric Analysis on a New Hybrid Power Plant Based on Internal Combustion Steam Cycle (GIST Cycle),” Proc of Flowers’97, Florence World Energy Research Symposium, Firenze, SGE Editoriali.
Caputo, C., Gambini, M., and Guizzi, G. L., 1997, “Internal Combustion Steam Cycle (G.I.S.T. Cycle): Thermodynamical Feasibility and Plant Lay-Out Proposals,” ASME Paper No. 97-AA-134.
Caputo, C., Gambini, M., and Guizzi, G. L., 1997, “New Hybrid Power Plants Based on Internal Combustion Steam Cycles (GIST Cycles),” Proc. of 9th National Conference “Tecnologie e Sistemi Energetici Complessi—Sergio Stecco,” Milano, SGE Editoriali (in Italian).
Gambini, M., Guizzi, G. L., and Vellini, M., 1997, “Calculation Model for Unconventional Components of GIST Cycles,” Proc. of 9th National Conference “Tecnologie e Sistemi Energetici Complessi,” Milano, Italy, SGE Editoriali (in Italian).
Chiesa, P., Consonni, S., and Lozza, G., 1998, “A Comparative Analysis of IGCCs With CO2 Sequestration,” 4th International Conference on Greenhouse Gas Control Technologies, Interlaken, Switzerland.
Lozza, G., 1990, “Bottoming Steam Cycles for Combined Gas-Steam Power Plants: A Theoretical Estimation of Steam Turbine Performance and Cycle Analysis,” ASME Cogen-Turbo, New Orleans, LA.
Consonni, S., 1992, “ Performance Prediction of Gas/Steam Cycles for Power Generation,” Ph.D. thesis No. 1893-T, Mechanical and Aerospace Engineering Department, Princeton University, Princeton, NJ.
Chiesa, P., Consonni, S., Lozza, G., and Macchi, E., 1993, “Predicting the Ultimate Performance of Advanced Power Cycles Based on Very High Temperature Gas Turbine Engines,” ASME Paper 93-GT-384.
Macchi, E., Consonni, S., Lozza, G., and Chiesa, P., 1995 “An Assessment of the Thermodynamic Performance of Mixed Gas-Steam Cycles: Part A—Intercooled and Steam Injected Cycles,” ASME Journal of Engineering for Gas Turbine and Power, 117 .
Chiesa, P., and Consonni, S., 1999, “Natural Gas Fired Combined Cycle With Low CO2 Emissions,” 44th ASME Gas Turbine and Aeroengine Congress, Indianapolis, IN.
Hofstäder, A., Frutschi H. U., and Haselbacher H., 1998, “Effects of Steam Reheat in Advanced Steam Injected Gas Turbine Cycles,” ASME Paper No. 98-GT-584.
Lozza, G., 1993, “Steam Cycles for Large Size High Gas Temperature Combined Cycles,” Proc 7th ASME Cogen-Turbo, Bournemuth, UK.
Gas Turbine World, 1996, “Basic Specifications of Combined Cycles,” GTW.

Figures

Grahic Jump Location
CO2 removal and liquefaction systems
Grahic Jump Location
Performance of the AMC and the CC with and without CO2 recovery
Grahic Jump Location
The net electric efficiency
Grahic Jump Location
The CO2 specific emission rate
Grahic Jump Location
Electricity production costs
Grahic Jump Location
The electricity production cost increase

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In