Dean, W. R., 1927, “Note on the Motion of Fluid in a Curved Pipe,” Philos. Mag., 4 , pp. 208–223.
Mori, Y., and Nakayama, W., 1965, “Study on Forced Convective Heat Transfer in Curved Pipes (1st Report, Laminar Region),” Int. J. Heat Mass Transfer
[CrossRef], 8 , pp. 67–82.
Mori, Y., and Nakayama, W., 1967, “Study on Forced Convective Heat Transfer in Curved Pipes (2nd Report, Turbulent Region),” Int. J. Heat Mass Transfer
[CrossRef], 10 , pp. 37–57.
Mori, Y., and Nakayama, W., 1967, “Study on Forced Convective Heat Transfer in Curved Pipes (3rd Report, Theoretical Analysis Under the Condition of Uniform Wall Temperature and Practical Formulae),” Int. J. Heat Mass Transfer, 10 , pp. 681–695.
Patankar, S. V., Pratap, V. S., and Spalding, D. B., 1974, “Prediction of Laminar Flow and Heat Transfer in Helical Coiled Pipes,” J. Fluid Mech., 62 , pp. 539–551.
Ito, H., 1959, “Friction Factors for Turbulent Flow in Curved Pipes,” ASME J. Basic Eng., 81 , pp. 123–124.
Kalb, C. E., and Seader, J. D., 1983, “Entrance Region Heat Transfer in a Uniform Wall-Temperature Helical Coil With Transition From Turbulent to Laminar Flow,” Int. J. Heat Mass Transfer, 26 , pp. 23–32.
Lyne, W. H., 1971, “Unsteady Viscous Flow in Curved Pipe,” J. Fluid Mech., 45 , pp. 13–31.
Zalosh, R., and Nelson, W. G., 1973, “Pulsating Flow in a Curved Tube,” J. Fluid Mech., 59 , pp. 693–705.
Simon, H. A., Chang, M. H., and Chow, J. C. F., 1977, “Heat Transfer in Curved Tubes With Pulsatile Fully Developed Laminar Flow,” ASME J. Heat Transfer, 99 , pp. 590–595.
Rabadi, N. J., Chow, J. C. F., and Simon, H. A., 1982, “Heat Transfer in Curved Tubes With Pulsating Flow,” Int. J. Heat Mass Transfer, 25 , pp. 195–203.
Zabielski, L., and Mestel, A. J., 1998, “Unsteady Blood Flow in a Helically Symmetric Pipe,” J. Fluid Mech.
[CrossRef], 370 , pp. 321–345.
Guo, L., Chen, X., Feng, Z., and Bai, B., 1998, “Transient Convective Heat Transfer in a Helical Coiled Tube With Pulsatile Fully Developed Turbulent Flow,” Int. J. Heat Mass Transfer, 41 , pp. 2867–2875.
Akhavan, R., Kamm, R. D., and Shapiro, A. H., 1991, “An Investigation of Transition to Turbulence in Bounded Oscillatory Flows, Part 1. Experiments,” J. Fluid Mech., 225 , pp. 395–422.
Jung, W. J., Mangiavacchi, N., and Akhavan, R., 1992, “Suppression of Turbulence in Wall-Bounded Flows by High Frequency Spanwise Oscillations,” Phys. Fluids A
[CrossRef], 4 (8), pp. 1605–1607.
Baron, A., and Quadrio, M., 1996, “Turbulent Drag Reduction by Spanwise Wall Oscillations,” Appl. Sci. Res.
[CrossRef], 55 , pp. 311–326.
Choi, K.-S., Clayton, B. R., 2001, “The Mechanism of Turbulent Drag Reduction With Wall Oscillation,” Int. J. Heat Mass Transfer, 22 , pp. 1–9.
Chang, S. W., Su, L. M., Morris, W. D., and Liou, T. M., 2003, “Heat Transfer in a Smooth-Walled Reciprocating Anti-Gravity Open Thermosyphon,” Int. J. Therm. Sci., 42 , pp. 1089–1103.
Chang, S. W., 2001, “Forced Convective Heat Transfer of Parallel-Mode Reciprocating Tube Fitted With a Twisted Tape With Application to Piston Cooling,” ASME J. Eng. Gas Turbines Power
[CrossRef], 123 , pp. 146–156.
Editorial Board of ASME Journal of Heat Transfer, 1993, “Journal of Heat Transfer Policy on Reporting Uncertainties in Experimental Measurements and Results,” ASME J. Heat Transfer, 115 , pp. 5–6.
Dittus, F. W., and Boelter, L. M. K., 1930, University of California Berkeley, Univ. Calif. Publ. Eng., 2 , p. 443.