0
Research Papers: Gas Turbines: Controls, Diagnostics, and Instrumentation

A Simple Mathematical Approach to Data Reconciliation in a Single-Shaft Combined Cycle System

[+] Author and Article Information
S. Can Gülen

 GE Energy, 1 River Road, Schenectady, NY 12345can.gulen@ps.ge.com

Raub W. Smith

 GE Energy, 1 River Road, Schenectady, NY 12345raub.smith@ps.ge.com

J. Eng. Gas Turbines Power 131(2), 021601 (Dec 18, 2008) (9 pages) doi:10.1115/1.2978994 History: Received March 15, 2006; Revised July 15, 2008; Published December 18, 2008

The ultimate proof of the soundness and viability of a novel technology is a full-scale demonstration test in which actual components are run successfully over the entire operating envelope. Consequently, the collection of accurate and meaningful test data is of utmost importance to the success of the test. An analysis of such data will validate the original design concepts and will lead to paths of further improvement for the next generations thereof. Statistical fundamentals to determine the accuracy and precision of measured data are amply documented and readily available in well-established standards. The yardstick that should be used for the “meaningfulness” of the measured test data is the satisfaction of the fundamental laws of conservation. While it is known that the “true” values of the sensor data when inserted into the governing equations for the tested component will result in perfect balances, “actual” measured values will always result in “imbalances.” Therefore, reconciliation of the individual measurements with the governing conservation equations is a must prior to the actual analysis of the data. Reconciliation in this context is an estimation of the true values of the sensor data from the actual sensor data by using statistical concepts. This paper describes the development of a data reconciliation concept that is universally applicable to any process or power plant system where sensor data are used. The usefulness and power of the technique are demonstrated by its application to a single-shaft combined cycle with both gas turbine and steam turbine driving a common generator. In the absence of a reliable and accurate measuring system to individually determine gas and steam turbine shaft outputs, data reconciliation is vital to an accurate analysis of the data.

FIGURES IN THIS ARTICLE
<>
Copyright © 2009 by American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Grahic Jump Location
Figure 1

Sample heat and mass balance data for a single-shaft CC system

Grahic Jump Location
Figure 3

Contribution of measured parameters to the GT heat balance error

Grahic Jump Location
Figure 2

Contribution of measured parameters to the HRSG heat balance error

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In