Research Papers: Internal Combustion Engines

Simulating the Concentration Equations and the Gas-Wall Interface for One-Dimensional Based Diesel Particulate Filter Models

[+] Author and Article Information
Christopher Depcik

Department of Mechanical Engineering, The University of Kansas, 3120 Learned Hall, 1530 West 15th Street, Lawrence, KS 66045-7609depcik@ku.edu

J. Eng. Gas Turbines Power 132(3), 032803 (Nov 30, 2009) (12 pages) doi:10.1115/1.3155792 History: Received November 03, 2008; Revised April 26, 2009; Published November 30, 2009; Online November 30, 2009

This paper enhances an earlier publication by including the concentration equations of motion into the area-conserved one-dimensional based diesel particulate filter model. A brief historical review of the species equations is accomplished to describe this model and the pertinent physics involved. In the species equations through the wall and soot layers, the diffusion constants are modified to account for the close proximity of the porous walls and the particulate matter to the gas flowing through the accompanying layers. In addition, a review of potential options involving the diffusion velocity is accomplished to determine the effect of pressure gradients on this phenomenon. In the previous paper, the model formulation illustrated that a common assumption to make for an enthalpy difference is the use of constant pressure specific heat times a temperature difference. Because of the different heats of formation and sensible enthalpies associated with the chemical species, this assumption reviewed is found to have a related error. Finally, because each channel is treated as an open system, making the common assumption of dilute mixture simplification is reviewed and found to have an associated error.

Copyright © 2010 by American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.



Grahic Jump Location
Figure 4

Oxidation and cool down test simulated using the different diffusion velocity options

Grahic Jump Location
Figure 3

Contour plot of molecular weight through PM and wall layer (dp/dy diffusion option modeled.

Grahic Jump Location
Figure 2

Comparison of the different diffusion options

Grahic Jump Location
Figure 1

Square channel schematic illustrating the important geometric and soot parameters

Grahic Jump Location
Figure 6

Utilizing individual diffusion constant calibrated pre-exponential with dp/dy version

Grahic Jump Location
Figure 7

Comparing the use of cp(ΔT) for enthalpy with actual enthalpy in energy equations (dp/dy diffusion option modeled)

Grahic Jump Location
Figure 8

Comparing the use of dilute mixture simplification (dp/dy diffusion option modeled)

Grahic Jump Location
Figure 9

Difference in the exit mass flow rates between different dilute mixture simplification options

Grahic Jump Location
Figure 5

Exit oxygen mole fraction comparing three different diffusion velocity options



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In