Research Papers: Gas Turbines: Structures and Dynamics

Criteria for Best Performance of Pre-Optimized Solid Dampers

[+] Author and Article Information
Chiara Gastaldi

Department of Mechanical and
Aerospace Engineering,
Politecnico di Torino,
Torino 10129, Italy
e-mail: chiara.gastaldi@polito.it

Muzio M. Gola

Department of Mechanical and
Aerospace Engineering,
Politecnico di Torino,
Torino 10129, Italy
e-mail: muzio.gola@polito.it

1Corresponding author.

Contributed by the Structures and Dynamics Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received June 26, 2018; final manuscript received July 2, 2018; published online November 16, 2018. Editor: Jerzy T. Sawicki.

J. Eng. Gas Turbines Power 141(4), 042502 (Nov 16, 2018) (9 pages) Paper No: GTP-18-1379; doi: 10.1115/1.4040820 History: Received June 26, 2018; Revised July 02, 2018

This paper furthers recent research by these authors. The starting point is the pre-optimization of solid dampers, which ensures that all dampers bound to “misbehave” are excluded since the early design stage. The authors now enlarge the scope of their investigations to explore those damper configurations selected inside the admissible design area. The purpose of the paper is to present a set of criteria apt to select a damper configuration which not only avoids unwanted situations, but in addition guarantees high performance under different design conditions. The analysis starts with the definition of a set of requirements a high performance damper should meet. In detail, the present investigation seeks to answer the following questions: in the low excitation regime, what is the frequency shift and the stiffening effect each damper can provide? for increasing excitation levels, which damper will start slipping sooner? in the high excitation regime, which damper provides the maximum dissipation? Like pre-optimization, it does not involve nonlinear finite element calculations, and unlike existing optimization procedures, is not linked to a specific set of blades the damper may be coupled to. The numerical prediction of the blade-damper coupled dynamics is here used only for validation purposes. The approach on which this paper rests is fully numerical; however, real contact parameters are taken from extensive experimental investigations made possible by those purposely developed test rigs which are the distinctive mark of the AERMEC Lab of Politecnico di Torino.

Copyright © 2019 by ASME
Topics: Dampers , Blades
Your Session has timed out. Please sign back in to continue.


Griffin, J. , 1980, “ Friction Damping of Resonant Stresses in Gas Turbine Engine Airfoils,” ASME J. Eng. Power, 102(2), p. 329. [CrossRef]
Srinivasan, A. , 1997, “ Flutter and Resonant Vibration Characteristics of Engine Blades,” ASME J. Eng. Gas Turbines Power, 119(4), pp. 742–775. [CrossRef]
Sextro, W. , Popp, K. , and Wolter, I. , 1997, “ Improved Reliability of Bladed Disks Due to Friction Dampers,” ASME Paper No. 97-GT-189.
Koh, K. , Griffin, J. H. , Filippi, S. , and Akay, A. , 2005, “ Characterization of Turbine Blade Friction Dampers,” ASME J. Eng. Gas Turbines Power, 127(4), pp. 856–862. [CrossRef]
Petrov, E. , and Ewins, D. , 2006, “ Effects of Damping and Varying Contact Area at Blade-Disk Joints in Forced Response Analysis of Bladed Disk Assemblies,” ASME J. Turbomach., 128(2), pp. 403–410. [CrossRef]
Berruti, T. , and Maschio, V. , 2012, “ Experimental Investigation on the Forced Response of a Dummy Counter-Rotating Turbine Stage With Friction Damping,” ASME J. Eng. Gas Turbines Power, 134(12), p. 122502.
Krack, M. , Herzog, A. , von Scheidt, L. P. , Wallaschek, J. , Siewert, C. , and Hartung, A. , 2012, “ Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to Microslip,” ASME Paper No. DETC2012-70184.
Cameron, T. , and Griffin, J. , 1989, “ An Alternating Frequency/Time Domain Method for Calculating the Steady-State Response of Nonlinear Dynamic Systems,” ASME J. Appl. Mech., 56(1), pp. 149–154. [CrossRef]
Cardona, A. , Coune, T. , Lerusse, A. , and Geradin, M. , 1994, “ A Multiharmonic Method for Nonlinear Vibration Analysis,” Int. J. Numer. Methods Eng,, 37(9), pp. 1593–1608. [CrossRef]
Craig, R. R. , and Bampton, M. C. C. , 1968, “ Coupling of Substructures for Dynamic Analyses,” AIAA J., 6(7), pp. 1313–1319. [CrossRef]
Petrov, E. , 2011, “ A High-Accuracy Model Reduction for Analysis of Nonlinear Vibrations in Structures With Contact Interfaces,” ASME J. Eng. Gas Turbines Power, 133(10), p. 102503. [CrossRef]
Zucca, S. , 2016, “ On the Dual Craig–Bampton Method for the Forced Response of Structures With Contact Interfaces,” Nonlinear Dyn., 87(4), pp. 2445–2455. [CrossRef]
Yang, B. , and Menq, C. , 1998, “ Characterization of 3D Contact Kinematics and Prediction of Resonant Response of Structures Having 3D Frictional Constraint,” J. Sound Vib., 217(5), pp. 909–925. [CrossRef]
Petrov, E. , and Ewins, D. , 2003, “ Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks,” ASME J. Turbomach., 125(2), pp. 364–371. [CrossRef]
Nacivet, S. , Pierre, C. , Thouverez, F. , and Jezequel, L. , 2003, “ A Dynamic Lagrangian Frequency–Time Method for the Vibration of Dry-Friction-Damped Systems,” J. Sound Vib., 265(1), pp. 201–219. [CrossRef]
Gastaldi, C. , and Gola, M. , 2016, “ On the Relevance of a Microslip Contact Model for Under-Platform Dampers,” Int. J. Mech. Sci., 115–116, pp. 145–156. [CrossRef]
Pesaresi, L. , Armand, J. , Schwingshackl, C. W. , and Wong, C. , 2017, “ An Advanced Underplatform Damper Modelling Approach Based on a Microslip Contact Model,” International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Maui, HI, Dec. 16–17, pp. 1–10 https://www.researchgate.net/publication/320353664_An_advanced_underplatform_damper_modelling_approach_based_on_a_microslip_contact_model.
Szwedowicz, J. , Sextro, W. , Visser, R. , and Masserey, P. A. , 2003, “ On Forced Vibration of Shrouded Turbine Blades,” ASME paper No. GT2003-38808.
Szwedowicz, J. , Gibert, C. , Sommer, T. P. , and Kellerer, R. , 2008, “ Numerical and Experimental Damping Assessment of a Thin-Walled Friction Damper in the Rotating Setup With High Pressure Turbine Blades,” ASME J. Eng. Gas Turbines Power, 130(1), p. 012502.
Schwingshackl, C. , Petrov, E. , and Ewins, D. , 2012, “ Effects of Contact Interface Parameters on Vibration of Turbine Bladed Disks With Underplatform Dampers,” ASME J. Eng. Gas Turbines Power, 134(3), p. 032507.
Gastaldi, C. , and Gola, M. , 2015, “ A Random Sampling Strategy for Tuning Contact Parameters of Underplatform Dampers,” ASME Paper No. GT2015-42834.
Panning, L. , Sextro, W. , and Popp, K. , 2000, “ Optimization of Interblade Friction Damper Design,” ASME Paper No. 2000-GT-0541.
Panning, L. , Sextro, W. , and Popp, K. , 2002, “ Optimization of the Contact Geometry Between Turbine Blades and Underplatform Dampers With Respect to Friction Damping,” ASME Paper No. GT2002-30429.
Panning, L. , Popp, K. , Sextro, W. , Götting, F. , Kayser, A. , and Wolter, I. , 2004, “ Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application,” ASME Paper No. GT2004-53316.
Berruti, T. , Firrone, C. , Pizzolante, M. , and Gola, M. , 2007, “ Fatigue Damage Prevention on Turbine Blades: Study of Underplatform Damper Shape,” Key Eng. Mater., 347, pp. 159–164. [CrossRef]
Gola, M. , and Gastaldi, C. , 2014, “ Understanding Complexities in Underplatform Damper Mechanics,” ASME Paper No. GT2014-25240.
Gastaldi, C. , 2018, Modeling Friction for Turbomachinery Applications: Tuning Techniques and Adequacy Assessment of Heuristic Contact Models, InTech, London.
Gastaldi, C. , and Gola, M. , 2016, “ Pre-Optimization of Asymmetrical Underplatform Dampers,” ASME J. Eng. Gas Turbines Power, 139(1), p. 012504. [CrossRef]
Gastaldi, C. , Berruti, T. M. , and Gola, M. M. , 2018, “ Best Practices for Underplatform Damper Designers,” Proc. Inst. Mech. Eng., Part C, 232(7), pp. 1221–1235. [CrossRef]
Gastaldi, C. , Berruti, T. M. , and Gola, M. M. , 2018, “ The Relevance of Damper Pre-Optimization and Its Effectiveness on the Forced Response of Blades,” ASME J. Eng. Gas Turbines Power, 140(6), p. 062505. [CrossRef]
Botto, D. , Gastadi, C. , Gola, M. M. , and Umer, M. , 2017, “ An Experimental Investigation of the Dynamics of a Blade With Two Under-Platform Dampers,” ASME J. Eng. Gas Turbines Power, 140(3), p. 032504. [CrossRef]
Botto, D. , and Umer, M. , 2018, “ A Novel Test Rig to Investigate Under-Platform Damper Dynamics,” Mech. Syst. Signal Process., 100, pp. 344–359. [CrossRef]
Botto, D. , Lavella, M. , and Gola, M. , 2012, “ Measurement of Contact Parameters of Flat on Flat Contact Surfaces at High Temperature,” ASME Paper No. GT2012-69677.
Schwingshackl, C. , Petrov, E. , and Ewins, D. , 2012, “ Measured and Estimated Friction Interface Parameters in a Nonlinear Dynamic Analysis,” Mech. Sys. Signal Proc., 28, pp. 574–584. [CrossRef]
Battiato, G. , Firrone, C. , and Berruti, T. , 2017, “ Forced Response of Rotating Bladed Disks: Blade Tip-Timing Measurements,” Mech. Syst. Signal Process., 85, pp. 912–926. [CrossRef]
Bessone, A. , Toso, F. , and Berruti, T. , 2015, “ Investigation on the Dynamic Response of Blades With Asymmetric Under Platform Dampers,” ASME Paper No. GT2015-42597.
Gastaldi, C. , and Berruti, T. M. , 2018, “ Competitive Time Marching Solution Methods for Systems With Friction-Induced Nonlinearities,” Appl. Sci., 8(2), p. 291. [CrossRef]
Gastaldi, C. , and Berruti, T. M. , 2017, “ A Method to Solve the Efficiency-Accuracy Trade-Off of Multi-Harmonic Balance Calculation of Structures With Friction Contacts,” Int. J. Nonlinear Mech., 92, pp. 25–40. [CrossRef]
Gola, M. , and Gastaldi, C. , 2017, “ Under-Platform Damper Measurements at Politecnico di Torino,” The Mechanics of Jointed Structures, Springer, Basel, Switzerland, pp. 181–204.


Grahic Jump Location
Fig. 1

(a) Bladed disk close up on two adjacent blades and (b) curved-flat damper configuration. Parameters θR, θL, and h are the design variables of the pre-optimization process and of the subsequent high performance investigation.

Grahic Jump Location
Fig. 2

Top: example of IP and OOP pre-optimization maps for residual radius h = 50%r and friction coefficients μL = μR = 0.3. Design areas are indicated on each map. Bottom left: intersection of IP and OOP design areas. Bottom right: representation of forbidden areas and limit lines identified on maps.

Grahic Jump Location
Fig. 3

(a) Absolute platform kinematics for IP motion of the blades shown in Fig. 1(a) and (b) relative platform kinematics (right platform considered still) for IP motion

Grahic Jump Location
Fig. 4

Mind map of the CHP of solid dampers procedure

Grahic Jump Location
Fig. 5

Representation of the numerical model of a solid damper between a set of platforms

Grahic Jump Location
Fig. 6

(a) Representative scheme of KW in the case of pure IP motion. (b) Representative scheme of KU in case of pure OOP motion.

Grahic Jump Location
Fig. 7

Damper performance maps: ((a) and (b)) IP and OOP vertical and horizontal stiffness in full stick, ((c) and (d)) IP and OOP minimum displacement to reach gross slip, ((e) and (f)) IP and OOP dissipation parameter at advanced gross slip

Grahic Jump Location
Fig. 8

(a) Example of IP full stick blade-damper coupled response for damper configurations with different KW values and (b) relationship between vertical stiffness KW and corresponding IP frequency increase (represented in blue) and amplitude reduction (represented in black)

Grahic Jump Location
Fig. 9

(a) Damper force and moments equilibrium for IP motion and bilateral slip and (b) platform-to-platform hysteresis cycle in the case of IP motion and its relation to the damper force equilibrium

Grahic Jump Location
Fig. 10

(a) (θR, θL) two-dimensional space where the high performance areas coming from the three CHP steps are shown. In yellow, their intersection. (b) Numerical prediction of the blade-damper coupled response for increasing excitation levels: three dampers, termed A1, A2, and B, also shown in Fig. 10(a) are considered.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In