The present study is conducted to investigate the local heat/mass transfer characteristics for flow through perforated plates. A naphthalene sublimation method is employed to determine the local heat/mass transfer coefficients on the effusion plate. Two parallel perforated plates are arranged in two different configurations: staggered and shifted in one direction. The experiments are conducted for hole pitch-to-diameter ratios of 6.0, for gap distance between the perforated plates of 0.33 to 10 hole diameters, and for Reynolds numbers of 5,000 to 12,000. The result shows that the high transfer region is formed at stagnation region and at the mid-line of the adjacent impinging jets due to secondary vortices and flow acceleration to the effusion hole. For flows through the perforated plates, the mass transfer rates on the surface of the effusion plate are about six to ten times higher than for effusion cooling alone (single perforated plate). In general, higher heat/mass transfer is obtained with smaller gap distance between two perforated plates.
- International Gas Turbine Institute
Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingment/Effusion Cooling System
- Views Icon Views
- Share Icon Share
- Search Site
Cho, HH, & Rhee, DH. "Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingment/Effusion Cooling System." Proceedings of the ASME Turbo Expo 2000: Power for Land, Sea, and Air. Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration. Munich, Germany. May 8–11, 2000. V003T01A058. ASME. https://doi.org/10.1115/2000-GT-0252
Download citation file: