In this paper, consideration is given to the dynamic response of a rotating cantilever twisted and inclined airfoil blade subjected to contact loads at the free end. Starting with the basic geometrical relations and energy formulation for a rotating Timoshenko beam constrained at the hub in a centrifugal force field, a system of coupled partial differential equations are derived for the combined axial, lateral and twisting motions which includes the transverse shear, rotary inertia, and Coriolis effects, as well. In the mathematical formulation, the torsion of the thin airfoil also considers a very general case of shear center not being coincident with the CG (center of gravity) of the cross section, which allows the equations to be used also for analyzing eccentric tip-rub loading of the blade. Equations are presented in terms of axial load along the longitudinal direction of the beam which enables us to solve the dynamic pulse buckling due to the tip being loaded in the longitudinal as well as transverse directions of the beam column. The Rayleigh–Ritz method is used to convert the set of four coupled-partial differential equations into equivalent classical mass, stiffness, damping, and gyroscopic matrices. Natural frequencies are computed for beams with varying “slenderness ratio” and “aspect ratio” as well as “twist angles.” Dynamical equations account for the full coupling effect of the transverse flexural motion of the beam with the torsional and axial motions due to pretwist in the airfoil. Some transient dynamic responses of a rotating beam repeatedly rubbing against the outer casing is shown for a typical airfoil with and without a pretwist.
Skip Nav Destination
e-mail: sunil.sinha@ae.ge.com
Article navigation
Technical Papers
Combined Torsional-Bending-Axial Dynamics of a Twisted Rotating Cantilever Timoshenko Beam With Contact-Impact Loads at the Free End
Sunil K. Sinha
Sunil K. Sinha
Principal Engineer
GE Aircraft Engines, M.D.: P-30,
e-mail: sunil.sinha@ae.ge.com
General Electric Company
, 1 Neumann Way, Cincinnati, OH 45215
Search for other works by this author on:
Sunil K. Sinha
Principal Engineer
GE Aircraft Engines, M.D.: P-30,
General Electric Company
, 1 Neumann Way, Cincinnati, OH 45215e-mail: sunil.sinha@ae.ge.com
J. Appl. Mech. May 2007, 74(3): 505-522 (18 pages)
Published Online: May 31, 2006
Article history
Received:
February 15, 2005
Revised:
May 31, 2006
Citation
Sinha, S. K. (May 31, 2006). "Combined Torsional-Bending-Axial Dynamics of a Twisted Rotating Cantilever Timoshenko Beam With Contact-Impact Loads at the Free End." ASME. J. Appl. Mech. May 2007; 74(3): 505–522. https://doi.org/10.1115/1.2423035
Download citation file:
Get Email Alerts
Sound Mitigation by Metamaterials With Low-Transmission Flat Band
J. Appl. Mech (January 2025)
Deformation-Dependent Effective Vascular Permeability of a Biological Tissue Containing Parallel Microvessels
J. Appl. Mech (January 2025)
Mechanics of a Tunable Bistable Metamaterial With Shape Memory Polymer
J. Appl. Mech (January 2025)
Related Articles
Effects of Contact Interface Parameters on Vibration of Turbine Bladed Disks With Underplatform Dampers
J. Eng. Gas Turbines Power (March,2012)
Free Response of Twisted Plates with Fixed Support Separation
J. Vib. Acoust (April,2001)
Single Degree of Freedom Model for Thermoelastic Damping
J. Appl. Mech (May,2007)
Modeling of a One-Sided Bonded and Rigid Constraint Using Beam Theory
J. Appl. Mech (May,2008)
Related Proceedings Papers
Related Chapters
Mechanics of Long Beam Columns
Mechanics of Drillstrings and Marine Risers
Engineering Design about Electro-Hydraulic Intelligent Control System of Multi Axle Vehicle Suspension
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Third Edition