A partial ACL injury may involve different levels of fiber disruption, or fibers may sustain microscopic changes in their structure without gross disruption, resulting in a change in ligament function. The effect of partial ACL tears on the mechanical and functional stability of the knee has not been well documented, in part because of diagnostic difficulties. A computer model of the knee in the sagittal plane was used in this study to simulate tests using the KT-2000 Knee Arthrometer, which quantifies Lachman’s test for ACL injury. A variety of partial ACL anterior and posterior bundle injuries were simulated. Anterior and posterior bundle injuries were subdivided into four different simulated injury levels: mild (one-half tear of the bundle), moderate (complete tear of the bundle), severe (complete tear of the bundle and tear of one-half of the other bundle), and more severe (severe injury plus an additional elongation of the other bundle represented by 5% increases of its initial strain). Force-displacement results obtained from simulated KT-2000 knee arthrometer tests depended on the level of injury. Mild and moderate injuries produced only small change in the anterior tibial translation—at different force levels. Severe injury produced increased anterior tibial translation depending on which bundle was completely ruptured. The compliance index defined as the ratio of the displacement and the force within 68 N and 90 N anterior drawer forces, the stiffness, and the rate of change of stiffness of the anterior force-displacement were found to be better at predicting partial ACL ruptures than simple differences in anterior tibial translation. It was possible in the model results to discriminate knees with various levels of partial ACL injuries using the first and second derivatives of the force-displacement curve.
Skip Nav Destination
e-mail: wliu@kumc.edu
Article navigation
June 2002
Technical Papers
A Modeling Study of Partial ACL Injury: Simulated KT-2000 Arthrometer Tests
Wen Liu,
e-mail: wliu@kumc.edu
Wen Liu
Department of Physical Therapy and Rehabilitation Science, The University of Kansas Medical Center, Kansas City, Kansas 66160-7601
Search for other works by this author on:
Murray E. Maitland,
Murray E. Maitland
Sport Medicine Center, Faculty of Kinesiology, The University of Calgary, Calgary, Canada
Search for other works by this author on:
G. Douglas Bell
G. Douglas Bell
Sport Medicine Center, Faculty of Kinesiology, The University of Calgary, Calgary, Canada
Search for other works by this author on:
Wen Liu
Department of Physical Therapy and Rehabilitation Science, The University of Kansas Medical Center, Kansas City, Kansas 66160-7601
e-mail: wliu@kumc.edu
Murray E. Maitland
Sport Medicine Center, Faculty of Kinesiology, The University of Calgary, Calgary, Canada
G. Douglas Bell
Sport Medicine Center, Faculty of Kinesiology, The University of Calgary, Calgary, Canada
Contributed by the Bioengineering Division for publication in the JOURNAL OF BIOMECHANICAL ENGINEERING. Manuscript received by the Bioengineering Division Mar. 1999; revised manuscript received Dec. 2001. Associate Editor: M. G. Pandy.
J Biomech Eng. Jun 2002, 124(3): 294-301 (8 pages)
Published Online: May 21, 2002
Article history
Received:
March 1, 1999
Revised:
December 1, 2001
Online:
May 21, 2002
Citation
Liu, W., Maitland , M. E., and Bell, G. D. (May 21, 2002). "A Modeling Study of Partial ACL Injury: Simulated KT-2000 Arthrometer Tests ." ASME. J Biomech Eng. June 2002; 124(3): 294–301. https://doi.org/10.1115/1.1468636
Download citation file:
Get Email Alerts
Estimation of Joint Kinetics During Manual Material Handling Using Inertial Motion Capture: A Follow-Up Study
J Biomech Eng (February 2025)
Effect of Compressive Strain Rates on Viscoelasticity and Water Content in Intact Porcine Stomach Wall Tissues
J Biomech Eng (February 2025)
Eyelid Motion Tracking During Blinking Using High-Speed Imaging and Digital Image Correlation
J Biomech Eng (January 2025)
Related Articles
Design of a Compliant Steerable Arthroscopic Punch
J. Med. Devices (June,2010)
A Study on Construction Three-Dimensional Nonlinear Finite Element Model and Stress Distribution Analysis of Anterior Cruciate Ligament
J Biomech Eng (December,2009)
Influences of Partial Anterior Cruciate Ligament Injury on Anterior Cruciate Ligament Tensional Force and Kinematic Stability During Walking
J Biomech Eng (January,2023)
Finite Element Model of the Knee for Investigation of Injury Mechanisms: Development and Validation
J Biomech Eng (January,2014)
Related Chapters
The Effect of Anterior Cruciate Ligament Injury on Tibiofemoral Joint Biomechanics: Under Draw Load
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Survey on Athletes Burnout in Zhejiang
International Conference on Computer and Computer Intelligence (ICCCI 2011)
Cruciate Ligament Injuries in Female Alpine Ski Racers
Skiing Trauma and Safety: Seventh International Symposium