This paper describes the development of a simulation model for studying the tip-over stability of a typical heavy-duty hydraulic log-loader machine. The model takes into account the dynamics of (i) the base that can potentially rock back and forth, (ii) the combined vehicle suspension and ground/tire compliance, (iii) the friction between the tires and the ground, and (iv) the hydraulic actuators’ functions. The results demonstrate the effects of the manipulator movements, the flexibility of the contact between the base and the ground, the hydraulic compliance, and the friction properties between the wheels and the ground, on the stability of the machine. Particularly, it is shown that the flexibility of the contact between the base and the ground reduces the machine stability, whereas the flexibility at the manipulator joints due the hydraulic compliance improves the machine stability.
Issue Section:
Technical Briefs
1.
Sepehri
, N.
, and Lawrence
, P. D.
, 2000, “Mechatronic System Techniques in Teleoperated Control of Heavy-Duty Hydraulic Machines
,” Mechatronic Systems Techniques and Applications
, C. T.
Leondes
, ed., vol. 3
, Gorden and Breach Science
, Amsterdam, Netherlands, pp. 309
–373
.2.
Messuri
, D.
, and Klein
, C.
, 1985, “Automatic Body Regulation for Maintaining Stability of a Legged Vehicle During Rough-Terrain Locomotion
,” IEEE J. Rob. Autom.
0882-4967, 1
, pp. 132
–141
.3.
Nagy
, P. V.
, Desa
, S.
, and Whittaker
, W. L.
, 1994, “Energy-Based Stability Measure for Reliable Locomotion of Statically Stable Walkers: Theory and Application
,” Int. J. Robot. Res.
0278-3649, 13
, pp. 272
–287
.4.
Dubowsky
, S.
, and Vance
, E. E.
, 1989, “Planning Mobile Manipulator Motions Considering Vehicle Dynamic Stability Constraints
,” Proceedings IEEE International Conference on Robotics and Automation
, Scottsdale
, AZ, Vol. 3
, pp. 1271
–1276
.5.
Sugano
, S.
, Huang
, Q.
, and Kato
, I.
, 1993, “Stability Criteria in Controlling Mobile Robotic Systems
,” Proceedings IEEE/RSJ International Conference on Intelligent Robots and Systems
, Yokohama
, Japan, Vol. 3
, pp. 832
–838
.6.
Papadopoulos
, E. G.
, and Rey
, D. A.
, 2000, “Force-Angle Measure of Tipover Stability Margin for Mobile Manipulators
,” J. Vehicle Syst. Dyn.
, 33
, pp. 29
–48
.7.
Iagnemma
, K.
, Rzepniewski
, A.
, Dubowsky
, S.
, Pirjanian
, P.
, Huntsberger
, T.
, and Schenker
, P.
, 2000, “Mobile Robot Kinematic Reconfigurability for Rough-Terrain
,” Proc. Int. Symposium on Intelligent Sys. and Advanced Manufacturing
, Boston
, MA, paper #4196-47.8.
Ghasempoor
, A.
, and Sepehri
, N.
, 1998, “A Measure of Stability for Mobile Manipulators With Application to Heavy-Duty Hydraulic Machines
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 120
, pp. 360
–370
.9.
Abo-Shanab
, R. F.
, and Sepehri
, N.
, 2001, “On Dynamic Stability of Manipulators Mounted on Mobile Platforms
,” Robotica
0263-5747, 19
, pp. 439
–449
.10.
Abo-Shanab
, R. F.
, and Sepehri
, N.
, 2002, “Effect of Base Compliance on the Dynamic Stability of Mobile Manipulators
,” Robotica
0263-5747, 20
, pp. 607
–613
.11.
Abo-Shanab
, R. F.
, Sepehri
, N.
, and Wu
, Q.
, 2002, “On Dynamic Modelling of Robot Manipulators: The Method of Virtual Links
,” Proceedings ASME Design Engineering Technical Conference
, Montreal
, Canada, Paper #DETC’02/MECH-34225.12.
de Wit
, C. C.
, and Tsiotras
, P.
, 1999, “Dynamic Tire Friction Models for Vehicle Traction Control
,” Proc. 38th Conf. on Decision and Control
, Phoenix
, AZ, pp. 3746
–3751
.13.
Akpan
, U. O.
, and Kujath
, M. R.
, 1998, “Sensitivity of a Mobile Manipulator Response to System Parameters
,” ASME J. Vibr. Acoust.
0739-3717, 120
, pp. 156
–163
.14.
Maczynski
, A.
, and Wojciech
, S.
, 2003, “Dynamics of a Mobile Crane and Optimization of the Slewing Motion of Its Upper Structure
,” J. Nonlinear Dyn.
, 32
, pp. 259
–290
.15.
Towarek
, Z.
, 1998, “The Dynamic Stability of a Crane Standing on Soil During the Rotation of the Boom
,” Int. J. Mech. Sci.
0020-7403, 40
(6
), pp. 557
–574
.16.
Haessig
, D. A.
, and Friedland
, B.
, 1991, “On the Modeling and Simulation of Friction
,” ASME J. Dyn. Syst., Meas., Control
0022-0434, 113
, pp. 354
–362
.17.
Abo-Shanab
, R.
, 2003, “Dynamic Modeling and Stability Analysis of Mobile Manipulators with Application to Heavy-Duty Hydraulic Machines
,” Ph.D. thesis, Department of Mechanical and Industrial Engineering, The University of Manitoba, Chap. 6.18.
Claeys
, X.
, Yi
, J.
, Alvarez
, L.
, Horowitz
, R.
, and de Wit
, C. C.
, 2001, “A Dynamic Tire/Road Friction Model for 3D Vehicle Control and Simulation
,” Proceedings IEEE Intelligent Transportation Systems Conference
, Oakland
, CA, pp. 483
–488
.19.
Deur
, J.
, Asgari
, J.
, and Hrovat
, D.
, 2002, “A Dynamic Tire Friction Model for Combined Longitudinal and Lateral Motion
,” Proceedings ASME International Mechanical Engineering Congress and Exposition
, New York
, NY, pp. 229
–236
.20.
Yao
, B.
, Zhang
, J.
, Koehler
, D.
, and Litherland
, J.
, 1998, “High Performance Swing Velocity Tracking Control of Hydraulic Excavator
,” Proceedings of the American Control Conference
, Philadelphia
, pp. 818
–822
.Copyright © 2005
by American Society of Mechanical Engineers
You do not currently have access to this content.
