... was calculated automatically by the computer. This method realizes the automatic measurement and enhances the anti-interference ability of the system. In Zhejiang University, the force of the spring tube was obtained by the 0.05 level pressure measuring instrument. The stiffness was calculated and analyzed...

... of instrumentation and control (I&C), several active and passive measures have been investigated by researchers (e.g., Ref. [ 5 ]). These measures involve additional hardware and/or software to be integrated with the combustor system in order to reduce instabilities. Instabilities in combustion systems...

...Nicholas Vlajic; Melissa Davis; Corey Stambaugh This paper explains the control scheme that is to be used in the magnetic suspension mass comparator (MSMC), an instrument designed to directly compare mass artifacts in air to those in vacuum, at the United States National Institute of Standards...

... for publication in the J OURNAL OF D YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received April 19, 2017; final manuscript received May 2, 2018; published online May 28, 2018. Assoc. Editor: Ryozo Nagamune. 19 04 2017 02 05 2018 Energy systems Instrumentation Nonlinear...

... YNAMIC S YSTEMS , M EASUREMENT, AND C ONTROL . Manuscript received October 5, 2017; final manuscript received February 16, 2018; published online March 27, 2018. Assoc. Editor: Sergey Nersesov. 05 10 2017 16 02 2018 Instrumentation Components Nuclear power plants...

... / N  = 0.2 and T y / N  = 0.3, the errors were 7% for loading and 11% for unloading. Instrumentation Sensors and actuators Components If the vertical deflection at the center of each plunger were denoted by u 1 , u 2 , and u 3 , respectively, two vectors on the deflection plane...

... for the instrumentation of the hydraulic circuit and their main features. Fig. 3 Hydraulic scheme of the experimental setup In the experimental layout, the axial piston pump is driven by an asynchronous electric motor whose angular velocity can be regulated. The pump is equipped with a pressure and a flow...

.... 05 01 2017 14 12 2017 Instrumentation Modeling and simulation Dynamic systems Components Despite the widespread use of cranes, their efficient and safe operation remains a challenging research and development topic. Cranes are one of the few options available for transporting...

... acquisition board (PCI-6229, National Instruments) with a sampling rate of 5 kHz was used for both signal generation and charge measurement. A voltage amplifier (E-663, Physik Instrument) provided a regulated voltage from −20 to 120 V to drive the piezoelectric actuators. An 84 μ F capacitor was employed...

... of Florence University have sustained this work sharing scientific instrumentation and laboratories at no-cost. Research Activities described in this paper were assured, thanks to the initiative of students which were able to promote crowdfunding activities between private citizens and sponsors covering...

... of each method in real rail industry is also presented. This information is given in Table 4 . Another summary presented in this section is on the possibility to perform test without stationery instruments, time required to perform the tests and where possible, the ability to measure a defect...

...Zhao-Dong Xu; Yeshou Xu; Qianqiu Yang; Chao Xu; Feihong Xu; Cheng Wang Vibration is an environmental factor with hazardous effects on the instruments' precision, structural stability, and service life in engineering fields. Many kinds of energy dissipation devices have been invented to reduce...

... ONTROL . Manuscript received September 18, 2016; final manuscript received May 10, 2017; published online August 10, 2017. Assoc. Editor: Yang Shi. 18 09 2016 10 05 2017 Adaptive Aerospace systems Fluid control systems Instrumentation Intelligent control Mechatronics Modeling...

...), a direct current generator (3), to control the load imposed on the motor shaft, a rectifier circuit with varivolt (1), a torque transducer (4), and instruments to measure current, voltage, and angular speed (2). In this paper, experiments performed in laboratory and in a real industrial environment...

...: Dumitru I. Caruntu. 18 11 2015 01 12 2016 Distributed parameter systems Instrumentation Modeling and simulation Vibration control Control Dynamic systems Components It is expected that the maximum vibration for odd modes occurs at midspan. Hence, it may be reasonable...

..., AND C ONTROL . Manuscript received October 17, 2015; final manuscript received July 21, 2016; published online October 17, 2016. Assoc. Editor: M. Porfiri. 17 10 2015 21 07 2016 Energy systems Instrumentation Mechatronics Control systems Components With rising demands...

...Anne Schmitz; Jaclyn Norberg The purpose of this study was to evaluate the relationship between forceplate inaccuracies and joint torques during running. Instrumented gait analysis data were collected on a single subject running above ground. A Monte Carlo analysis was performed using 60...

... received August 1, 2015; final manuscript received May 13, 2016; published online June 28, 2016. Assoc. Editor: Kevin Fite. 01 08 2015 13 05 2016 Adaptive Instrumentation Mechatronics Motion controls Sensors and actuators Optimal control Components The SFE is a unique...

... based on the dynamics of its cam curve is indispensable. Energy systems Instrumentation Modeling and simulation Motion controls Vibration control Control systems Dynamic systems Components 25 12 2014 17 03 2016 Contributed by the Dynamic Systems Division of ASME...

... controls Condition based monitoring Energy systems Instrumentation Power systems Sensors and actuators Structural health monitoring System identification Control systems Components Since the invention of the free-piston engine by Pescara [ 1 ], its concept has been investigated for use...