Performance of polymer electrolyte membrane fuel cells (PEMFC) at high current densities is limited to transport reactants and products. Furthermore, large amounts of water are generated and may be condensed due to the low temperature of the PEMFC. Development of a two-phase flow model is necessary in order to predict water flooding and its effects on the PEMFC performance. In this paper, a multiphase mixture model (M2) is used, accurately, to model two-phase transport in porous media of a PEMFC. The cathode side, which includes channel, gas diffusion layer (GDL), microporous layer (MPL), and catalyst layer (CL), is considered as the computational domain. A multidomain approach has been used and transport equations are solved in each domain independently with appropriate boundary conditions between GDL and MPL. Distributions of species concentration, temperature, and velocity field are obtained, and the effects of MPL on species distribution and fuel cell performance are investigated. MPL causes a saturation jump and a discontinuity in oxygen concentration at the GDL/MPL interface. The effect of MPL thickness on fuel cell performance is also studied. The results revealed that the MPL can highly increase the maximum power of a PEMFC.
Skip Nav Destination
Article navigation
February 2014
This article was originally published in
Journal of Fuel Cell Science and Technology
Research-Article
Effects of Microhydrophobic Porous Layer on Water Distribution in Polymer Electrolyte Membrane Fuel Cells
Ramin Roshandel
Ramin Roshandel
1
e-mail: Roshandel@sharif.edu
Sharif University of Technology,
Tehran,
Department of Energy Engineering
,Sharif University of Technology,
Tehran,
Iran
1Corresponding author.
Search for other works by this author on:
Ramin Roshandel
e-mail: Roshandel@sharif.edu
Sharif University of Technology,
Tehran,
Department of Energy Engineering
,Sharif University of Technology,
Tehran,
Iran
1Corresponding author.
Contributed by the Advanced Energy Systems Division of ASME for publication in the JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY. Manuscript received December 11, 2012; final manuscript received August 1, 2013; published online October 22, 2013. Editor: Nigel M. Sammes.
J. Fuel Cell Sci. Technol. Feb 2014, 11(1): 011004 (12 pages)
Published Online: October 22, 2013
Article history
Received:
December 11, 2012
Revision Received:
August 1, 2013
Citation
Ahmadi, F., and Roshandel, R. (October 22, 2013). "Effects of Microhydrophobic Porous Layer on Water Distribution in Polymer Electrolyte Membrane Fuel Cells." ASME. J. Fuel Cell Sci. Technol. February 2014; 11(1): 011004. https://doi.org/10.1115/1.4025522
Download citation file:
Get Email Alerts
Cited By
Online Measurement of Impedance Spectroscopy of Lithium-ion Batteries Based on Equalised Current Harmonic Injection
J. Electrochem. En. Conv. Stor
Improving the Discharge Characteristics of Nonaqueous Lithium Oxygen Batteries by Constructing Microchannels
J. Electrochem. En. Conv. Stor
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Multi-Resolution PEM Fuel Cell Model Validation and Accuracy Analysis
J. Fuel Cell Sci. Technol (February,2006)
The Effect of Inlet Parameters on Fluid Flow and Cell Performance at Cathode of a Proton Exchange Membrane Fuel Cell
J. Fuel Cell Sci. Technol (August,2010)
Transport Phenomena Analysis in Proton Exchange Membrane Fuel Cells
J. Heat Transfer (December,2005)
An Analytical Solution to Predict the Inception of Two-Phase Flow in a Proton Exchange Membrane Fuel Cell
J. Fuel Cell Sci. Technol (December,2010)
Related Proceedings Papers
Related Chapters
Experiment Study on the Current Density Distribution of PEMFC
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Thermal Design Guide of Liquid Cooled Systems
Thermal Design of Liquid Cooled Microelectronic Equipment
Macropore Spatial Variability of CT-Measured Solute Transport Parameters
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20