The paper focuses on the simulation of a hybrid vehicle with proton exchange membrane fuel cell as the main energy conversion system. A modeling structure has been developed to perform accurate analysis for powertrain and control system design. The models simulate the dynamics of the main powertrain elements and fuel cell system to give a sufficient description of the complex interaction between each component under real operating conditions. A control system based on a multilevel scheme has also been introduced and the complexity of control issues for hybrid powertrains have been discussed. This study has been performed to analyze the energy flows among powertrain components. The results highlight that optimizing these systems is not a trivial task and the use of precise models can improve the powertrain development process. Furthermore, the behavior of system state variables and the influence of control actions on fuel cell operation have also been analyzed. In particular, the effect of introducing a rate limiter on the stack power has been investigated, evidencing that a rate limiter increased the system efficiency by 10% while reducing the dynamic performance of the powertrain in terms of speed error.
Skip Nav Destination
e-mail: iarsie@unisa.it
e-mail: adidomenico@unisa.it
e-mail: pianese@unisa.it
e-mail: msorrentino@unisa.it
Article navigation
August 2007
This article was originally published in
Journal of Fuel Cell Science and Technology
Technical Papers
Modeling and Analysis of Transient Behavior of Polymer Electrolyte Membrane Fuel Cell Hybrid Vehicles
Ivan Arsie,
Ivan Arsie
Department of Mechanical Engineering,
e-mail: iarsie@unisa.it
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italy
Search for other works by this author on:
Alfonso Di Domenico,
Alfonso Di Domenico
Department of Mechanical Engineering,
e-mail: adidomenico@unisa.it
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italy
Search for other works by this author on:
Cesare Pianese,
Cesare Pianese
Mem. ASME
Department of Mechanical Engineering,
e-mail: pianese@unisa.it
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italy
Search for other works by this author on:
Marco Sorrentino
Marco Sorrentino
Mem. ASME
Department of Mechanical Engineering,
e-mail: msorrentino@unisa.it
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italy
Search for other works by this author on:
Ivan Arsie
Department of Mechanical Engineering,
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italye-mail: iarsie@unisa.it
Alfonso Di Domenico
Department of Mechanical Engineering,
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italye-mail: adidomenico@unisa.it
Cesare Pianese
Mem. ASME
Department of Mechanical Engineering,
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italye-mail: pianese@unisa.it
Marco Sorrentino
Mem. ASME
Department of Mechanical Engineering,
University of Salerno - Italy
, Via Ponte don Melillo 1, 84084 Fisciano, Salerno, Italye-mail: msorrentino@unisa.it
J. Fuel Cell Sci. Technol. Aug 2007, 4(3): 261-271 (11 pages)
Published Online: September 9, 2006
Article history
Received:
July 21, 2005
Revised:
September 9, 2006
Citation
Arsie, I., Di Domenico, A., Pianese, C., and Sorrentino, M. (September 9, 2006). "Modeling and Analysis of Transient Behavior of Polymer Electrolyte Membrane Fuel Cell Hybrid Vehicles." ASME. J. Fuel Cell Sci. Technol. August 2007; 4(3): 261–271. https://doi.org/10.1115/1.2743071
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
Optimal Design of Hybrid Electric Fuel Cell Vehicles Under Uncertainty and Enterprise Considerations
J. Fuel Cell Sci. Technol (April,2010)
System-Level Model and Stochastic Optimal Control for a PEM Fuel Cell Hybrid Vehicle
J. Dyn. Sys., Meas., Control (December,2006)
A Vision for a Secure Transportation System Without Hydrogen or Oil
J. Energy Resour. Technol (September,2006)
A Multilevel Approach to the Energy Management of an Automotive Polymer Electrolyte Membrane Fuel Cell System
J. Fuel Cell Sci. Technol (February,2010)
Related Proceedings Papers
Related Chapters
Defining Joint Quality Using Weld Attributes
Ultrasonic Welding of Lithium-Ion Batteries
Risk Mitigation for Renewable and Deispersed Generation by the Harmonized Grouping (PSAM-0310)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
Plug in Type Series Hybrid Vehicle: Concept, Design and Implementation
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3