Sole thermal or solvent methods for heavy-oil recovery are not effective enough to deliver cost efficient processes. Hybrid applications of those two techniques have been proposed to take advantage of each and a wide range of investigations have been recently performed focusing on extreme conditions such as bitumen containing sands and carbonates, deep reservoirs, and oil-wet fractured carbonates. What is critically important in these applications is to determine the best performing solvent for a particular application and optimal application conditions for a given solvent at high temperature conditions. In this study, the results from various reported works on the hybrid applications of thermal (mainly steam) and solvent methods were complied, analyzed, and compared. Attention was given to a comparative analysis of steam-over-solvent injection in fractured reservoirs (SOS-FR) method. Steam/solvent methods show a promising outcome in general, while specific modifications must be taken into account for different application situations. These were discussed and specified, especially from proper solvent type and optimal application conditions for alternate injection of steam and solvent in different reservoir types.
Skip Nav Destination
Article navigation
January 2016
Research-Article
Solvent Selection Criteria and Optimal Application Conditions for Heavy-Oil/Bitumen Recovery at Elevated Temperatures: A Review and Comparative Analysis
Khosrow Naderi,
Khosrow Naderi
Department of Civil
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
Search for other works by this author on:
Tayfun Babadagli
Tayfun Babadagli
Department of Civil
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
e-mail: tayfun@ualberta.ca
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
e-mail: tayfun@ualberta.ca
Search for other works by this author on:
Khosrow Naderi
Department of Civil
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
Tayfun Babadagli
Department of Civil
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
e-mail: tayfun@ualberta.ca
and Environmental Engineering,
School of Mining and Petroleum Engineering,
University of Alberta,
3-112 Markin CNRL-NREF,
Edmonton, AB T6G 2W2, Canada
e-mail: tayfun@ualberta.ca
1Corresponding author.
Contributed by the Petroleum Division of ASME for publication in the JOURNAL OF ENERGY RESOURCES TECHNOLOGY. Manuscript received June 15, 2015; final manuscript received July 27, 2015; published online September 16, 2015. Editor: Hameed Metghalchi.
J. Energy Resour. Technol. Jan 2016, 138(1): 012904 (9 pages)
Published Online: September 16, 2015
Article history
Received:
June 15, 2015
Revised:
July 27, 2015
Citation
Naderi, K., and Babadagli, T. (September 16, 2015). "Solvent Selection Criteria and Optimal Application Conditions for Heavy-Oil/Bitumen Recovery at Elevated Temperatures: A Review and Comparative Analysis." ASME. J. Energy Resour. Technol. January 2016; 138(1): 012904. https://doi.org/10.1115/1.4031453
Download citation file:
Get Email Alerts
Related Articles
Scaling Criteria for Waterflooding and Immiscible CO 2 Flooding in Heavy Oil Reservoirs
J. Energy Resour. Technol (March,2017)
A New High-Temperature Gel for Profile Control in Heavy Oil Reservoirs
J. Energy Resour. Technol (March,2016)
An Experimental Study of the Post-CHOPS Cyclic Solvent Injection Process
J. Energy Resour. Technol (July,2015)
Steam-Oil Ratio in Steam-Solvent Coinjection Simulation for Homogeneous and Heterogeneous Bitumen Reservoirs
J. Energy Resour. Technol (November,2018)
Related Proceedings Papers
Related Chapters
Pipeline Integrity and Security
Continuing and Changing Priorities of the ASME Boiler & Pressure Vessel Codes and Standards
ASME Section VI: Recommended Rules for the Care and Operation of Heating Boilers
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition
Introduction
Consensus on Operating Practices for Control of Water and Steam Chemistry in Combined Cycle and Cogeneration