A fluidic scheme is described which exploits a confined countercurrent shear layer to achieve multiaxis thrust vector response of supersonic jets in the absence of moving parts. Proportional and continuous control of jet deflection is demonstrated at Mach numbers up to 2, for pitch vectoring in rectangular nozzles and multiaxis vectoring in axisymmetric nozzles. Secondary mass flow rates less than approximately 2% of the primary flow are used to achieve thrust vector angles exceeding 15 degrees. Jet slew rates up to 180 degrees per second are shown, and the fluidic scheme is examined in both static and wind-on configurations. Thrust performance is studied for external coflow velocities between Mach 0.3 and 0.7. [S0098-2202(00)02601-8]
Issue Section:
Technical Papers
Topics:
Deflection,
Design,
Flow (Dynamics),
Nozzles,
Pressure,
Shear (Mechanics),
Thrust,
Jets,
Geometry,
Mach number
1.
Herrick, P. W., 1988, “Air Combat Payoffs of Vectoring/Reversing Exhaust Nozzles,” AIAA/ASME/SAE/ASEE 24th Joint Propulsion Conference, Boston, MA, Paper AIAA-88-3239.
2.
Nguyen, L. T., and Gilbert, W. P., 1990, “Impact of Emerging Technologies on Future Combat Aircraft Agility,” AIAA/SFTE/DGLR/SETP Fifth Biannual Flight Test Conference, Ontario, CA, Paper AIAA 90-1304.
3.
Henderson
, W. P.
, 1990
, “Propulsion System Integration in High Performance Aircraft
,” Aerospace Engineering
, 10
, No. 2
, pp. 21
–25
.4.
Mishler, R., and Wilkinson, T., 1992, “Emerging Airframe/Propulsion Integration Technologies at General Electric,” AIAA/SAE/ASME/ASEE 28 Joint Propulsion Conference and Exhibit, Nashville, TN, Paper AIAA 92-3335.
5.
Chambers, J. R., 1992, “High-Alpha Flight Dynamics: Lessons Learned,” NASA High Angle-of-Attack Projects and Technology Conference.
6.
Doonan, J. G., and Kuchar, A. P., 1992, “Scale Model Test Results of a Multi-Slotted Vectoring 2DCD Ejector Nozzle,” AIAA/SAE/ASME/ASEE 28 Joint Propulsion Conference and Exhibit, Nashville, TN, Paper AIAA 92-3264.
7.
Capone, F., Smereczniak, P., Spetnagel, D., and Thayer, E., 1992, “Comparative Investigation of Multiplane Thrust Vectoring Nozzles,” AIAA/SAE/ASME/ASEE 28 Joint Propulsion Conference and Exhibit, Nashville, TN, Paper AIAA 92-3263.
8.
Snow, B. H., 1990, “Thrust Vectoring Control Concepts and Issues,” SAE Technical Paper Series, 901848, Oct.
9.
Asbury, S. C., and Capone, F. J., 1995, “Multiaxis Thrust-Vectoring Characteristics of a Model Representative of the F-18 High-Alpha Research Vehicle at Angles of Attack from 0 to 70 deg,” Dec., NASA Technical Paper 3531.
10.
Wing, D. J., 1994, “Static Investigation of Two Fluidic Thrust-Vectoring Concepts on a Two-Dimensional Convergent Divergent Nozzle,” NASA TM-4574.
11.
Warren, R. W., 1962, “Some Parameters Affecting the Design of Bistable Fluid Amplifiers,” ASME Symposium of Fluid Jet Control Devices, Nov., pp. 75–82.
12.
Comparin, R. A., Mitchell, A. E., Mueller, H. R., and Glaettli, H. M., 1962, “On the Limitations and Special Effects in Fluid Jet Amplifiers,” ASME Symposium of Fluid Jet Control Devices, pp. 65–74.
13.
Gilbert, B., 1991, “Directional Control of Large Mass Flows by Fluidics,” FLUCOME ’91 ASME 3rd Triennial International Symposium of Fluid Control, Measurement and Visualization.
14.
Carrol, G. R., and Cox, H., 1983, “A Missile Flight Control System using Boundary Layer Thrust Vector Control,” June, Paper AIAA 83-1149.
15.
Fitzgerald, R. E., and Kampe, R. F., 1983, “Boundary Layer TVC for Missile Applications,” AIAA Paper 83-1153.
16.
Porzio
, A. J.
, and Franke
, M. E.
, 1989
, “Experimental Study of a Confined Jet Thrust Vector Control Nozzle
,” J. Propul. Power
, 5
, No. 5
, pp. 596
–601
.17.
Grinstein, F. F., 1998, “Entrainment and Thrust Vector Control with Countercurrent Rectangular Jets,” 11th ONR Propulsion Meeting, West Palm Beach, FL, pp. 34–41.
18.
Hunter, C. A., and Deere, K. A., 1999, “Computational Investigation of Fluidic Counterflow Thrust Vectoring,” 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Los Angeles, CA, Paper AIAA 99-2669.
19.
Strykowski
, P. J.
, Krothapalli
, A.
, and Forliti
, D. J.
, 1996
, “Counterflow Thrust Vectoring of Supersonic Jets
,” AIAA J.
, 34
, No. 11
, pp. 2306
–2314
.20.
Van der Veer
, M. R.
, and Strykowski
, P. J.
, 1997
, “Counterflow Thrust Vector Control of Subsonic Jets: Continuous and Bistable Regimes
,” J. Propul. Power
, 13
, No. 3
, pp. 412
–420
.1.
Young
, T.
, 1957
, “Outlines of Experiments and Inquiries Respecting Sound and Light
,” Lecture to the Royal Society;
2.
also
Journal of the Royal Aeronautical Society
, 61
, 157
157
.1.
Strykowski
, P. J.
, and Wilcoxon
, R. K.
, 1993
, “Mixing Enhancement due to Global Oscillations in Jets with Annular Counterflow
,” AIAA J.
, 31
, No. 3
, pp. 564
–570
.2.
Strykowski
, P. J.
, Krothapalli
, A.
, and Jendoubi
, S.
, 1996
, “The Effect of Counterflow on the Development of Compressible Shear Layers
,” J. Fluid Mech.
, 308
, pp. 63
–96
.3.
Ramaswamy, M. A., Alvi, F. S., and Krothapalli, A., 1997, “Special 6-Component Jet Rig Balance for Studying New Thrust Vectoring Concepts,” 17th ICIASF Conference, Pacific Grove, CA.
4.
Wishart, D. P., and Krothapalli, A., 1994, “On the Structure of a Heated Supersonic Jet,” AIAA Paper 94-0666.
5.
Forliti, D. J., 1995, “Measurement of a Rectangular Mach 2 Jet Under Free and Counterflow Thrust Vectored Conditions,” M.S. thesis, Department of Mechanical Engineering, Florida State University, Tallahassee, FL.
6.
Gillgrist, R. D., 1999, “A Fundamental Study of Thrust Vector Control Using Counterflow,” M.S. thesis, Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN.
7.
Flamm, J. D., 1998, “Experimental Study of a Nozzle Using Fluidic Counterflow for Thrust Vectoring,” 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cleveland, OH, Paper AIAA 98-3255.
8.
Raman
, G.
, Hailye
, M.
, and Rice
, E. J.
, 1993
, “Flip-Flop Jet Nozzle Extended to Supersonic Flows
,” AIAA J.
, 31
, No. 6
, pp. 1028
–1035
.9.
Schmid, G. F., 1996, “Design and Optimization of a Counterflowing Thrust Vectoring System,” M.S. thesis, University of Minnesota, MN.
10.
Strykowski, P. J., Schmid, G. F., Alvi, F. S., and Krothapalli, A., 1997, “Vectoring Thrust Using Confined Countercurrent Shear Layers,” AIAA 4th AIAA Shear Flow Control Conference, Snowmass, CO, Paper AIAA 97-1997.
Copyright © 2000
by ASME
You do not currently have access to this content.