Centrifugal fans with an electric motor included in the hub are commonly used in HVAC (heating, ventilation, and air conditioning) systems. A design of experiments (DOE) has been performed to study the effect of the entrance conditions of a backward-inclined centrifugal fan on its efficiency. The parameters involved are the base radius of the motor hub, the radius of the fan entry section, the deceleration factor throughout the entry zone (from the entry of the fan to the entry of the blade), and the solidity factor. Numerical simulation coupled with the DOE has been used for the sensitivity analysis of the entrance parameters. Initially, a complete factorial plan was performed to screen the most influent parameters and interactions. This has shown that the motor’s cap radius, as well as its interactions with other parameters, is not significant. A second DOE, using composite central design (CCD which has a second order of accuracy) has then been performed on the remaining parameters (radius of the fan entry section, deceleration factor, and the solidity factor). The effects of these parameters and their interactions on the fan efficiency are now presented. A linear regression with three parameters has been performed to establish the efficiency distribution map. The methodology employed is validated by comparing the predicted results from the DOE and those from the numerical simulation of the corresponding fan.
Skip Nav Destination
Article navigation
Technical Papers
Sensitivity Analysis of Entrance Design Parameters of a Backward-Inclined Centrifugal Fan Using DOE Method and CFD Calculations
A. Behzadmehr,
A. Behzadmehr
Mechanical Engineering,
University of Sistan & Baluchestan
, Zahedan, Iran
Search for other works by this author on:
Y. Mercadier,
Y. Mercadier
Génie Mécanique,
Université de Sherbrooke
, Québec Canada
Search for other works by this author on:
N. Galanis
N. Galanis
Génie Mécanique,
Université de Sherbrooke
, Québec Canada
Search for other works by this author on:
A. Behzadmehr
Mechanical Engineering,
University of Sistan & Baluchestan
, Zahedan, Iran
Y. Mercadier
Génie Mécanique,
Université de Sherbrooke
, Québec Canada
N. Galanis
Génie Mécanique,
Université de Sherbrooke
, Québec CanadaJ. Fluids Eng. May 2006, 128(3): 446-453 (8 pages)
Published Online: October 7, 2005
Article history
Received:
September 28, 2004
Revised:
October 7, 2005
Citation
Behzadmehr, A., Mercadier, Y., and Galanis, N. (October 7, 2005). "Sensitivity Analysis of Entrance Design Parameters of a Backward-Inclined Centrifugal Fan Using DOE Method and CFD Calculations." ASME. J. Fluids Eng. May 2006; 128(3): 446–453. https://doi.org/10.1115/1.2173293
Download citation file:
Get Email Alerts
Related Articles
High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans—Part I: Simulations With Selected Blade Rows
J. Turbomach (October,2010)
High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans—Part II: Entire Component Simulation and Investigation
J. Turbomach (October,2010)
The Application of an Aerodynamic Shroud for Axial Ventilation Fans
J. Fluids Eng (June,2007)
Optimization of a Cyclone Using Multiphase Flow Computational Fluid Dynamics
J. Fluids Eng (March,2020)
Related Proceedings Papers
Related Chapters
Characteristics Measurement and FPGA Controller Design for an Air Motor and Electric Motor Hybrid Power System
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)
Practical Applications
Robust Control: Youla Parameterization Approach
Practical Applications
Robust Control: Youla Parameterization Approach