ac electrokinetic manipulations of particles and fluids are important techniques in the development of lab-on-a-chip technologies. Most of these systems involve planar micro-electrode geometries, generating high strength electric fields. When these fields are applied to a dielectric medium, Joule heating occurs. Understanding electrothermal heating and monitoring the temperature in these environments are critical for temperature-sensitive investigations including biological applications. Additionally, significant changes in fluid temperature when subjected to an electric field will induce electrohydrodynamic flows, potentially disrupting the intended microfluidic profile. This work investigates heat generated from the interaction of ac electric fields and water at various electrical conductivities (from 0.92 mS/m to 390 mS/m). The electrode geometry is an indium tin oxide (ITO) electrode strip wide and a grounded, planar ITO substrate separated by a spacer with microfluidic features. Laser-induced fluorescence is used to measure the experimental changes in temperature. A normalization procedure that requires a single temperature-sensitive dye, Rhodamine B (RhB), is used to reduce uncertainty. The experimental electrothermal results are compared with theory and computer simulations.
Comparison of Experiments and Simulation of Joule Heating in ac Electrokinetic Chips
- Views Icon Views
- Share Icon Share
- Search Site
Williams, S. J., Chamarthy, P., and Wereley, S. T. (February 4, 2010). "Comparison of Experiments and Simulation of Joule Heating in ac Electrokinetic Chips." ASME. J. Fluids Eng. February 2010; 132(2): 021103. https://doi.org/10.1115/1.4000740
Download citation file: