Skip Nav Destination
Issues
July 1944
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Maintenance of Hydroelectric Generating Units
Trans. ASME. July 1944, 66(5): 329–333.
doi: https://doi.org/10.1115/1.4018000
Topics:
Hydropower
,
Maintenance
,
Design
,
Generators
,
Hydraulic turbines
,
Wear
Development of the Lysholm-Smith Torque Converter
Trans. ASME. July 1944, 66(5): 343–349.
doi: https://doi.org/10.1115/1.4018008
Topics:
Torque converters
,
Design
,
Turbines
,
Construction
,
Hydraulic drive systems
,
Propellers
,
Pump impellers
,
Railroads
,
Ships
,
Torque
Gas Turbines and Turbosuperchargers
Trans. ASME. July 1944, 66(5): 351–363.
doi: https://doi.org/10.1115/1.4018011
Topics:
Gas turbines
,
Turbochargers
,
Cycles
,
Diesel
,
Aircraft engines
,
Aviation
,
Boilers
,
Compressors
,
Design
,
Emergencies
Bursting Tests of Steam-Turbine Disk Wheels
Trans. ASME. July 1944, 66(5): 373–380.
doi: https://doi.org/10.1115/1.4018024
Topics:
Disks
,
Steam turbines
,
Wheels
,
Tensile strength
,
Hoop stress
,
Turbines
,
Alloy steel
,
Alloys
,
Carbon
,
Rotors
Fluid Flow Through Two Orifices in Series—II
Trans. ASME. July 1944, 66(5): 387–395.
doi: https://doi.org/10.1115/1.4018036
Topics:
Fluid dynamics
,
Orifices
,
Temperature
,
Flow (Dynamics)
,
Pressure
,
Fluids
,
Water
,
Steam
,
Theoretical analysis
,
Water temperature
The Combustion of Barley Anthracite
Trans. ASME. July 1944, 66(5): 399–405.
doi: https://doi.org/10.1115/1.4018043
Topics:
Combustion
,
Fuels
,
Boilers
,
Firing
New Combustion-Control Methods for All Standard Fuels
Trans. ASME. July 1944, 66(5): 407–410.
doi: https://doi.org/10.1115/1.4018047
Topics:
Combustion
,
Fuels
,
Carbon dioxide
,
Furnaces
,
Flue gases
,
Flues
Investigation of Blade Characteristics: Performance and Efficiency of Turbine and Axial-Flow Compressor Stages
Trans. ASME. July 1944, 66(5): 413–418.
doi: https://doi.org/10.1115/1.4018050
Topics:
Axial flow
,
Blades
,
Compressors
,
Turbines
,
Airfoils
,
Flow (Dynamics)
,
Form drag
,
Performance characterization
,
Rotating blades
,
Wheels
Notch-Toughness Tests of Carbon-Molybdenum Pipe Material
Trans. ASME. July 1944, 66(5): 421–429.
doi: https://doi.org/10.1115/1.4018053
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
,
Power stations
,
Steel
,
Testing
,
Heat
,
High temperature
,
Engineers
Firing High-Pressure Furnaces
Trans. ASME. July 1944, 66(5): 433–437.
doi: https://doi.org/10.1115/1.4018060
Topics:
Firing
,
Furnaces
,
High pressure (Physics)
,
Combustion systems
,
Construction
,
Cracking (Materials)
,
Design
,
Energy generation
,
Fracture (Process)
,
Gas turbines
“Temp-turb” Temperature-Control System
Trans. ASME. July 1944, 66(5): 439–441.
doi: https://doi.org/10.1115/1.4018063
Topics:
Temperature control
,
Temperature
,
Fluid dynamics
,
Fluids
,
Rotation
,
Turbines
,
Wheels
,
Blades
,
Kinetic energy
,
Torque
Fatigue Studies on Urea Assembly Adhesives
Trans. ASME. July 1944, 66(5): 442–446.
doi: https://doi.org/10.1115/1.4018064
Heat and Vapor Transfer in the Dehydration of Prunes
Trans. ASME. July 1944, 66(5): 447–456.
doi: https://doi.org/10.1115/1.4018065
Topics:
Heat
,
Vapors
,
Drying
,
Electrical conductance
,
Temperature
,
Cutting
,
Evaporation
,
High temperature
,
Thermal conductivity
,
Thermocouples
A New Approach to the Problem of Conditioning Water for Steam Generation
Trans. ASME. July 1944, 66(5): 457–474.
doi: https://doi.org/10.1115/1.4018066
Topics:
Steam
,
Water
,
Boilers
,
Sodium
,
Potassium
,
Pressure
,
Temperature
,
Turbines
,
Aluminum
,
Boiler tubes
Discussions and Closures
Discussion: “Maintenance of Hydroelectric Generating Units” (Bragg, George H., 1944, Trans. ASME, 66, pp. 329–333)
Trans. ASME. July 1944, 66(5): 333–335.
doi: https://doi.org/10.1115/1.4018001
Topics:
Hydropower
,
Maintenance
Discussion: “Maintenance of Hydroelectric Generating Units” (Bragg, George H., 1944, Trans. ASME, 66, pp. 329–333)
Trans. ASME. July 1944, 66(5): 335–336.
doi: https://doi.org/10.1115/1.4018002
Topics:
Hydropower
,
Maintenance
Discussion: “Maintenance of Hydroelectric Generating Units” (Bragg, George H., 1944, Trans. ASME, 66, pp. 329–333)
Trans. ASME. July 1944, 66(5): 336–337.
doi: https://doi.org/10.1115/1.4018003
Topics:
Hydropower
,
Maintenance
Discussion: “Maintenance of Hydroelectric Generating Units” (Bragg, George H., 1944, Trans. ASME, 66, pp. 329–333)
Trans. ASME. July 1944, 66(5): 337–339.
doi: https://doi.org/10.1115/1.4018004
Topics:
Hydropower
,
Maintenance
Discussion: “Maintenance of Hydroelectric Generating Units” (Bragg, George H., 1944, Trans. ASME, 66, pp. 329–333)
Trans. ASME. July 1944, 66(5): 339.
doi: https://doi.org/10.1115/1.4018005
Topics:
Hydropower
,
Maintenance
Discussion: “Maintenance of Hydroelectric Generating Units” (Bragg, George H., 1944, Trans. ASME, 66, pp. 329–333)
Trans. ASME. July 1944, 66(5): 339–340.
doi: https://doi.org/10.1115/1.4018006
Topics:
Hydropower
,
Maintenance
Closure to “Discussions of ‘Maintenance of Hydroelectric Generating Units’” (1944, Trans. ASME, 66, pp. 333–340)
Trans. ASME. July 1944, 66(5): 340–341.
doi: https://doi.org/10.1115/1.4018007
Topics:
Hydropower
,
Maintenance
Discussion: “Development of the Lysholm-Smith Torque Converter” (Lysholm, A., 1944, Trans. ASME, 66, pp. 343–349)
Trans. ASME. July 1944, 66(5): 349–350.
doi: https://doi.org/10.1115/1.4018009
Topics:
Torque converters
Discussion: “Development of the Lysholm-Smith Torque Converter” (Lysholm, A., 1944, Trans. ASME, 66, pp. 343–349)
Trans. ASME. July 1944, 66(5): 350.
doi: https://doi.org/10.1115/1.4018010
Topics:
Torque converters
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 363–364.
doi: https://doi.org/10.1115/1.4018012
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 364.
doi: https://doi.org/10.1115/1.4018013
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 364.
doi: https://doi.org/10.1115/1.4018014
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 364–365.
doi: https://doi.org/10.1115/1.4018015
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 365.
doi: https://doi.org/10.1115/1.4018016
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 365–366.
doi: https://doi.org/10.1115/1.4018017
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 366.
doi: https://doi.org/10.1115/1.4018018
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 366–367.
doi: https://doi.org/10.1115/1.4018019
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 367–369.
doi: https://doi.org/10.1115/1.4018020
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 369–370.
doi: https://doi.org/10.1115/1.4018021
Topics:
Gas turbines
,
Turbochargers
Discussion: “Gas Turbines and Turbosuperchargers” (Moss, Sanford A., 1944, Trans. ASME, 66, pp. 351–363)
Trans. ASME. July 1944, 66(5): 370.
doi: https://doi.org/10.1115/1.4018022
Topics:
Gas turbines
,
Turbochargers
Closure to “Discussions of ‘Gas Turbines and Turbosuperchargers’” (1944, Trans. ASME, 66, pp. 363–370)
Trans. ASME. July 1944, 66(5): 370–371.
doi: https://doi.org/10.1115/1.4018023
Topics:
Gas turbines
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 380.
doi: https://doi.org/10.1115/1.4018025
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 380–381.
doi: https://doi.org/10.1115/1.4018026
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 381.
doi: https://doi.org/10.1115/1.4018027
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 381.
doi: https://doi.org/10.1115/1.4018028
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 381.
doi: https://doi.org/10.1115/1.4018029
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 381–382.
doi: https://doi.org/10.1115/1.4018030
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 382.
doi: https://doi.org/10.1115/1.4018031
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 382–383.
doi: https://doi.org/10.1115/1.4018032
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 383–384.
doi: https://doi.org/10.1115/1.4018033
Topics:
Disks
,
Steam turbines
,
Wheels
Discussion: “Bursting Tests of Steam-Turbine Disk Wheels” (Robinson, Ernest L., 1944, Trans. ASME, 66, pp. 373–380)
Trans. ASME. July 1944, 66(5): 384.
doi: https://doi.org/10.1115/1.4018034
Topics:
Disks
,
Steam turbines
,
Wheels
Closure to “Discussions of ‘Bursting Tests of Steam-Turbine Disk Wheels’” (1944, Trans. ASME, 66, pp. 380–384)
Trans. ASME. July 1944, 66(5): 384–386.
doi: https://doi.org/10.1115/1.4018035
Topics:
Disks
,
Steam turbines
Discussion: “Fluid Flow Through Two Orifices in Series—II” (Stuart, Milton C., and Yarnall, D. Robert, 1944, Trans. ASME, 66, pp. 387–395)
Trans. ASME. July 1944, 66(5): 395.
doi: https://doi.org/10.1115/1.4018037
Topics:
Fluid dynamics
,
Orifices
Discussion: “Fluid Flow Through Two Orifices in Series—II” (Stuart, Milton C., and Yarnall, D. Robert, 1944, Trans. ASME, 66, pp. 387–395)
Trans. ASME. July 1944, 66(5): 395–396.
doi: https://doi.org/10.1115/1.4018038
Topics:
Fluid dynamics
,
Orifices
Discussion: “Fluid Flow Through Two Orifices in Series—II” (Stuart, Milton C., and Yarnall, D. Robert, 1944, Trans. ASME, 66, pp. 387–395)
Trans. ASME. July 1944, 66(5): 396.
doi: https://doi.org/10.1115/1.4018039
Topics:
Fluid dynamics
,
Orifices
Discussion: “Fluid Flow Through Two Orifices in Series—II” (Stuart, Milton C., and Yarnall, D. Robert, 1944, Trans. ASME, 66, pp. 387–395)
Trans. ASME. July 1944, 66(5): 396–397.
doi: https://doi.org/10.1115/1.4018040
Topics:
Fluid dynamics
,
Orifices
Discussion: “Fluid Flow Through Two Orifices in Series—II” (Stuart, Milton C., and Yarnall, D. Robert, 1944, Trans. ASME, 66, pp. 387–395)
Trans. ASME. July 1944, 66(5): 397.
doi: https://doi.org/10.1115/1.4018041
Topics:
Fluid dynamics
,
Orifices
Closure to “Discussions of ‘Fluid Flow Through Two Orifices in Series—II’” (1944, Trans. ASME, 66, pp. 395–397)
Trans. ASME. July 1944, 66(5): 397.
doi: https://doi.org/10.1115/1.4018042
Topics:
Fluid dynamics
,
Orifices
Discussion: “The Combustion of Barley Anthracite” (Johnson, Allen J., 1944, Trans. ASME, 66, pp. 399–405)
Trans. ASME. July 1944, 66(5): 405–406.
doi: https://doi.org/10.1115/1.4018044
Topics:
Combustion
Discussion: “The Combustion of Barley Anthracite” (Johnson, Allen J., 1944, Trans. ASME, 66, pp. 399–405)
Trans. ASME. July 1944, 66(5): 406.
doi: https://doi.org/10.1115/1.4018045
Topics:
Combustion
Closure to “Discussions of ‘The Combustion of Barley Anthracite’” (1944, Trans. ASME, 66, pp. 405–406)
Trans. ASME. July 1944, 66(5): 406.
doi: https://doi.org/10.1115/1.4018046
Topics:
Combustion
Discussion: “New Combustion-Control Methods for All Standard Fuels” (Reed, Robert, 1944, Trans. ASME, 66, pp. 407–410)
Trans. ASME. July 1944, 66(5): 410–412.
doi: https://doi.org/10.1115/1.4018048
Topics:
Combustion
,
Fuels
Closure to “Discussion of ‘New Combustion-Control Methods for All Standard Fuels’” (1944, Trans. ASME, 66, pp. 410–412)
Trans. ASME. July 1944, 66(5): 412.
doi: https://doi.org/10.1115/1.4018049
Topics:
Combustion
Discussion: “Investigation of Blade Characteristics: Performance and Efficiency of Turbine and Axial-Flow Compressor Stages” (Weske, J. R., 1944, Trans. ASME, 66, pp. 413–418)
Trans. ASME. July 1944, 66(5): 419.
doi: https://doi.org/10.1115/1.4018051
Topics:
Axial flow
,
Blades
,
Compressors
,
Turbines
Closure to “Discussion of ‘Investigation of Blade Characteristics: Performance and Efficiency of Turbine and Axial-Flow Compressor Stages’” (1944, Trans. ASME, 66, p. 419)
Trans. ASME. July 1944, 66(5): 419–420.
doi: https://doi.org/10.1115/1.4018052
Topics:
Axial flow
,
Blades
,
Compressors
,
Turbines
Discussion: “Notch-Toughness Tests of Carbon-Molybdenum Pipe Material” (Kinney, W. F., Rohrig, I. A., and Walker, H. S., 1944, Trans. ASME, 66, pp. 421–429)
Trans. ASME. July 1944, 66(5): 429.
doi: https://doi.org/10.1115/1.4018054
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
Discussion: “Notch-Toughness Tests of Carbon-Molybdenum Pipe Material” (Kinney, W. F., Rohrig, I. A., and Walker, H. S., 1944, Trans. ASME, 66, pp. 421–429)
Trans. ASME. July 1944, 66(5): 429.
doi: https://doi.org/10.1115/1.4018055
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
Discussion: “Notch-Toughness Tests of Carbon-Molybdenum Pipe Material” (Kinney, W. F., Rohrig, I. A., and Walker, H. S., 1944, Trans. ASME, 66, pp. 421–429)
Trans. ASME. July 1944, 66(5): 429–430.
doi: https://doi.org/10.1115/1.4018056
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
Discussion: “Notch-Toughness Tests of Carbon-Molybdenum Pipe Material” (Kinney, W. F., Rohrig, I. A., and Walker, H. S., 1944, Trans. ASME, 66, pp. 421–429)
Trans. ASME. July 1944, 66(5): 430.
doi: https://doi.org/10.1115/1.4018057
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
Discussion: “Notch-Toughness Tests of Carbon-Molybdenum Pipe Material” (Kinney, W. F., Rohrig, I. A., and Walker, H. S., 1944, Trans. ASME, 66, pp. 421–429)
Trans. ASME. July 1944, 66(5): 430.
doi: https://doi.org/10.1115/1.4018058
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
Closure to “Discussions of ‘Notch-Toughness Tests of Carbon-Molybdenum Pipe Material’” (1944, Trans. ASME, 66, pp. 429–430)
Trans. ASME. July 1944, 66(5): 430–431.
doi: https://doi.org/10.1115/1.4018059
Topics:
Carbon
,
Fracture toughness
,
Molybdenum
,
Pipes
Discussion: “Firing High-Pressure Furnaces” (Peterson, E. G., 1944, Trans. ASME, 66, pp. 433–437)
Trans. ASME. July 1944, 66(5): 437–438.
doi: https://doi.org/10.1115/1.4018061
Topics:
Firing
,
Furnaces
,
High pressure (Physics)
Closure to “Discussion of ‘Firing High-Pressure Furnaces’” (1944, Trans. ASME, 66, pp. 437–438)
Trans. ASME. July 1944, 66(5): 438.
doi: https://doi.org/10.1115/1.4018062
Topics:
Firing
,
High pressure (Physics)
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 474–475.
doi: https://doi.org/10.1115/1.4018067
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 475–477.
doi: https://doi.org/10.1115/1.4018069
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 477–478.
doi: https://doi.org/10.1115/1.4018070
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 478–479.
doi: https://doi.org/10.1115/1.4018071
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 479–480.
doi: https://doi.org/10.1115/1.4018072
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 480–481.
doi: https://doi.org/10.1115/1.4018074
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 481–483.
doi: https://doi.org/10.1115/1.4018076
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 483–485.
doi: https://doi.org/10.1115/1.4018078
Discussion: “A New Approach to the Problem of Conditioning Water for Steam Generation” (Hall, R. E., 1944, Trans. ASME, 66, pp. 457–474)
Trans. ASME. July 1944, 66(5): 485–487.
doi: https://doi.org/10.1115/1.4018079
Closure to “Discussions of ‘A New Approach to the Problem of Conditioning Water for Steam Generation’” (1944, Trans. ASME, 66, pp. 474–487)
Trans. ASME. July 1944, 66(5): 487–488.
doi: https://doi.org/10.1115/1.4018080