Skip Nav Destination
Issues
October 1949
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Calibration of Eccentric and Segmental Orifices in 4 and 6-In. Pipe Lines
Trans. ASME. October 1949, 71(7): 751–755.
doi: https://doi.org/10.1115/1.4017214
Topics:
Calibration
,
Orifices
,
Pipelines
,
Flowmeters
Critical Flow Through Sharp-Edged Orifices
Trans. ASME. October 1949, 71(7): 757–763.
doi: https://doi.org/10.1115/1.4017216
Topics:
Flow (Dynamics)
,
Orifices
,
Nozzles
,
Pressure
,
Pressure drop
,
Temperature
Air Flow Through Small Orifices in the Viscous Region
Trans. ASME. October 1949, 71(7): 765–772.
doi: https://doi.org/10.1115/1.4017219
Topics:
Air flow
,
Orifices
,
Pressure
,
Temperature
,
Carbon
,
Hydrogen
,
Combustion
,
Design
,
Fossil fuels
,
Fuels
Reaction Tests of Turbine Nozzles for Supersonic Velocities
Trans. ASME. October 1949, 71(7): 773–779.
doi: https://doi.org/10.1115/1.4017220
Topics:
Nozzles
,
Turbines
,
Exhaust systems
,
Pressure
,
Shock (Mechanics)
,
Boundary layers
,
Machinery
,
Separation (Technology)
,
Testing
Reaction Tests of Turbine Nozzles for Subsonic Velocities
Trans. ASME. October 1949, 71(7): 781–787.
doi: https://doi.org/10.1115/1.4017226
Topics:
Nozzles
,
Turbines
,
Design
,
Aerodynamics
,
Flow (Dynamics)
The Instron Tensile Tester
Trans. ASME. October 1949, 71(7): 789–796.
doi: https://doi.org/10.1115/1.4017227
Topics:
Instrumentation
,
Machinery
,
Tensile testing
Heat Transfer to Liquid Metals Flowing in Asymmetrically Heated Channels
Trans. ASME. October 1949, 71(7): 797–802.
doi: https://doi.org/10.1115/1.4017228
Topics:
Heat transfer
,
Liquid metals
,
Annulus
,
Eddies (Fluid dynamics)
,
Fluids
,
Heat
,
Heat flux
,
Turbulence
Heat Transfer to Water at High Flux Densities With and Without Surface Boiling
Trans. ASME. October 1949, 71(7): 805–814.
doi: https://doi.org/10.1115/1.4017232
Topics:
Boiling
,
Heat transfer
,
Water
,
Heat flux
,
Flow (Dynamics)
,
Forced convection
,
Pressure
,
Pressure drop
,
Stainless steel
,
Temperature
A Ventilated Thermal-Insulation Structure for High-Temperature Marine Power Plants
Trans. ASME. October 1949, 71(7): 817–823.
doi: https://doi.org/10.1115/1.4017235
Topics:
High temperature
,
Ocean energy
,
Thermal insulation
,
Heat
,
Leakage
,
Design
,
Ducts
,
Flow (Dynamics)
,
Fuel consumption
,
Machinery
The Mechanical Cleaning of Fouled Heat-Exchanger Tubes
Trans. ASME. October 1949, 71(7): 825–829.
doi: https://doi.org/10.1115/1.4017238
Topics:
Heat exchangers
Chemical Cleaning of Heat-Exchange Equipment
Trans. ASME. October 1949, 71(7): 831–836.
doi: https://doi.org/10.1115/1.4017240
Scale Formation and Control in Compression Distillation of Sea Water
Trans. ASME. October 1949, 71(7): 837–838.
doi: https://doi.org/10.1115/1.4017241
Topics:
Compression
,
Incrustations
,
Seawater
,
Low temperature
,
Warfare
Cleaning Tubular Heat Exchangers
Trans. ASME. October 1949, 71(7): 839–841.
doi: https://doi.org/10.1115/1.4017242
Topics:
Heat exchangers
Fouling Rates and Cleaning Methods in Refinery Heat Exchangers
Trans. ASME. October 1949, 71(7): 843–847.
doi: https://doi.org/10.1115/1.4017243
Topics:
Heat exchangers
,
Maintenance
,
Pressure
,
Temperature control
Rates of Fouling and Cleaning of Unfired Heat-Exchanger Equipment
Trans. ASME. October 1949, 71(7): 849–853.
doi: https://doi.org/10.1115/1.4017244
Topics:
Heat exchangers
,
Heat transfer
Fouling of Marine-Type Heat Exchangers
Trans. ASME. October 1949, 71(7): 855–869.
doi: https://doi.org/10.1115/1.4017245
Topics:
Heat exchangers
,
Design
,
Clearances (Engineering)
,
Compression
,
Condensers (steam plant)
,
Construction
,
Coolers
,
Fuel oils
,
Lubricating oils
,
Steam
Discussions and Closures
Discussion: “Calibration of Eccentric and Segmental Orifices in 4 and 6-In. Pipe Lines” (Beitler, S. R., and Masson, D. J., 1949, Trans. ASME, 71, pp. 751–755)
Trans. ASME. October 1949, 71(7): 755–756.
doi: https://doi.org/10.1115/1.4017215
Topics:
Calibration
,
Orifices
,
Pipelines
Discussion: “Critical Flow Through Sharp-Edged Orifices” (Perry, Jr., J. A., 1949, Trans. ASME, 71, pp. 757–763)
Trans. ASME. October 1949, 71(7): 763–764.
doi: https://doi.org/10.1115/1.4017217
Topics:
Flow (Dynamics)
,
Orifices
Closure to “Discussion of ‘Critical Flow Through Sharp-Edged Orifices’” (1949, Trans. ASME, 71, pp. 763–764)
Trans. ASME. October 1949, 71(7): 764.
doi: https://doi.org/10.1115/1.4017218
Topics:
Flow (Dynamics)
Discussion: “Reaction Tests of Turbine Nozzles for Supersonic Velocities” (Keenan, J. H., 1949, Trans. ASME, 71, pp. 773–779)
Trans. ASME. October 1949, 71(7): 779.
doi: https://doi.org/10.1115/1.4017221
Discussion: “Reaction Tests of Turbine Nozzles for Supersonic Velocities” (Keenan, J. H., 1949, Trans. ASME, 71, pp. 773–779)
Trans. ASME. October 1949, 71(7): 779.
doi: https://doi.org/10.1115/1.4017222
Discussion: “Reaction Tests of Turbine Nozzles for Supersonic Velocities” (Keenan, J. H., 1949, Trans. ASME, 71, pp. 773–779)
Trans. ASME. October 1949, 71(7): 779–780.
doi: https://doi.org/10.1115/1.4017223
Discussion: “Reaction Tests of Turbine Nozzles for Supersonic Velocities” (Keenan, J. H., 1949, Trans. ASME, 71, pp. 773–779)
Trans. ASME. October 1949, 71(7): 780.
doi: https://doi.org/10.1115/1.4017224
Closure to “Discussions of ‘Reaction Tests of Turbine Nozzles for Supersonic Velocities’” (1949, Trans. ASME, 71, pp. 779–780)
Trans. ASME. October 1949, 71(7): 780.
doi: https://doi.org/10.1115/1.4017225
Discussion: “Heat Transfer to Liquid Metals Flowing in Asymmetrically Heated Channels” (Harrison, W. B., and Menke, J. R., 1949, Trans. ASME, 71, pp. 797–802)
Trans. ASME. October 1949, 71(7): 802.
doi: https://doi.org/10.1115/1.4017229
Topics:
Heat transfer
,
Liquid metals
Discussion: “Heat Transfer to Liquid Metals Flowing in Asymmetrically Heated Channels” (Harrison, W. B., and Menke, J. R., 1949, Trans. ASME, 71, pp. 797–802)
Trans. ASME. October 1949, 71(7): 802–803.
doi: https://doi.org/10.1115/1.4017230
Topics:
Heat transfer
,
Liquid metals
Closure to “Discussions of ‘Heat Transfer to Liquid Metals Flowing in Asymmetrically Heated Channels’” (1949, Trans. ASME, 71, pp. 802–803)
Trans. ASME. October 1949, 71(7): 803.
doi: https://doi.org/10.1115/1.4017231
Topics:
Heat transfer
,
Liquid metals
Discussion: “Heat Transfer to Water at High Flux Densities With and Without Surface Boiling” (Kreith, Frank, and Summerfield, Martin, 1949, Trans. ASME, 71, pp. 805–814)
Trans. ASME. October 1949, 71(7): 814.
doi: https://doi.org/10.1115/1.4017233
Topics:
Boiling
,
Heat transfer
,
Water
Closure to “Discussion of ‘Heat Transfer to Water at High Flux Densities With and Without Surface Boiling’” (1949, Trans. ASME, 71, p. 814)
Trans. ASME. October 1949, 71(7): 814–815.
doi: https://doi.org/10.1115/1.4017234
Topics:
Heat transfer
,
Water
Discussion: “A Ventilated Thermal-Insulation Structure for High-Temperature Marine Power Plants” (London, A. L., and Garbett, C. R., 1949, Trans. ASME, 71, pp. 817–823)
Trans. ASME. October 1949, 71(7): 823–824.
doi: https://doi.org/10.1115/1.4017236
Topics:
High temperature
,
Ocean energy
,
Thermal insulation
Closure to “Discussion of ‘A Ventilated Thermal-Insulation Structure for High-Temperature Marine Power Plants’” (1949, Trans. ASME, 71, pp. 823–824)
Trans. ASME. October 1949, 71(7): 824.
doi: https://doi.org/10.1115/1.4017237
Topics:
High temperature
,
Ocean energy
,
Thermal insulation
Discussion: “The Mechanical Cleaning of Fouled Heat-Exchanger Tubes” (John, A., 1949, Trans. ASME, 71, pp. 825–829)
Trans. ASME. October 1949, 71(7): 829.
doi: https://doi.org/10.1115/1.4017239
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 871.
doi: https://doi.org/10.1115/1.4017246
Topics:
Circuits
,
Design
,
Fuel oils
,
Heat
,
Heat exchangers
,
Manufacturing
,
Ocean energy
,
Process industries
,
Thermal power stations
,
Water
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 871–873.
doi: https://doi.org/10.1115/1.4017247
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 873–874.
doi: https://doi.org/10.1115/1.4017248
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 874.
doi: https://doi.org/10.1115/1.4017249
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 874–875.
doi: https://doi.org/10.1115/1.4017250
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 875–877.
doi: https://doi.org/10.1115/1.4017251
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 877–879.
doi: https://doi.org/10.1115/1.4017252
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 879–881.
doi: https://doi.org/10.1115/1.4017253
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 881–882.
doi: https://doi.org/10.1115/1.4017254
Topics:
Heat exchangers
Discussion: “The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers” (John, A., Loucks, C. M., Groom, C. H., Campobasso, J. J., Latham, Jr., Allen, Dougherty, P. F., Brooks, C. H., Butler, R. C., McCurdy, Jr., W. N., Weiland, Jr., J. H., McCay, R. C., Barnes, J. E., and Bethon, H. E., 1949, Trans. ASME, 71, pp. 825–869)
Trans. ASME. October 1949, 71(7): 882–883.
doi: https://doi.org/10.1115/1.4017255
Topics:
Heat exchangers
Closure to “Discussions of ‘The Fouling and Cleaning of Surfaces in Unfired Heat Exchangers’” (1949, Trans. ASME, 71, pp. 871–883)
Trans. ASME. October 1949, 71(7): 883.
doi: https://doi.org/10.1115/1.4017256
Topics:
Heat
Email alerts
RSS Feeds
Three-Dimensional Numerical Investigation of Bubbles Growing and Merging in Superheated Nucleate Boiling
J. Fluids Eng (July 2025)
A Physical Interpretation of Swept Blades in Axial Compressors Employing Spanwise Equilibrium Analysis
J. Fluids Eng (September 2025)
Enhancement of the Thermodynamic Suppression Effect of Cavitation in a Hydrofoil With a Slit
J. Fluids Eng (September 2025)
