Palm-sized microturbomachinery have broad potential applications in micropower generation areas, such as air/fuel management systems for various fuel cells, propulsion engine for unmanned micro-air vehicles, power generation turbines for robots, small satellites, etc. This paper introduces design and manufacturing processes of mesoscale foil gas bearings applicable to the microturbomachinery and also presents its performances predicted from nonlinear orbit simulations. X-ray and ultraviolet lithography were explored as promising manufacturing tools of elastic foundations for the mesoscale foil gas bearings. Designed and manufactured mesoscale foil gas bearings have unique design features that precision-machined foil bearings cannot provide, such as easy control of mechanical properties of elastic foundations, a simple assembly process, and easy control of bearing preload through lithographic pattern. The manufactured bearing performance was predicted using a time-domain orbit simulation, and results are presented.
Issue Section:
Gas Turbines: Structures and Dynamics
Keywords:
assembling,
design engineering,
machine bearings,
machinery production industries,
machining,
micromechanical devices,
precision engineering,
time-domain analysis,
turbomachinery,
power MEMS,
mesoscale foil gas bearing,
palm-sized microturbomachinery
Topics:
Bearings,
Design,
Gas bearings,
Manufacturing,
Turbomachinery,
Foil bearings,
Simulation,
Rotors
1.
Epstein
, A. H.
, 2004, “Millimeter-Scale, Micro-Electro-Mechanical Systems Gas Turbine Engines
,” ASME J. Eng. Gas Turbines Power
0742-4795, 126
(2
), pp. 205
–226
.2.
Teo
, C. J.
, Liu
, L. X.
, Li
, H. Q.
, Ho
, L. C.
, Jacobson
, S. A.
, Ehrich
, F. F.
, Epstein
, A. H.
, and Spakovszky
, Z. S.
, 2006, “High-Speed Operation of a Gas-Bearing Supported MEMS Air Turbine
,” ASME Paper No. IJTC2006-12173.3.
Isomura
, K.
, Tanaka
, S.
, Togo
, S.
, and Esashi
, M.
, 2005, “Development of High-Speed Micro-Gas Bearings for Three-Dimensional Micro-Turbo Machines
,” J. Micromech. Microeng.
0960-1317, 15
, pp. S222
–S227
.4.
Vleugels
, P.
, Waumans
, T.
, Peirs
, J.
, Al Bender
, F.
, and Reynaerts
, D.
, 2006, “High-Speed Foil Bearings for Micro Gas Turbines: Test Set-Up
,” Proceedings of Power MEMS 2006
, Berkeley, CA.5.
Reynaerts
, D.
, Van Den Braembussche
, J.
, Hendrick
, P.
, Baelmans
, M.
, Driesen
, J.
, Puers
, R.
, Al-Bender
, F.
, Peirs
, J.
, Waumans
, T.
, Vleugels
, P.
, Liu
, K.
, Alsalihi
, Z.
, Di Sante
, A.
, Verstraete
, T.
, Verstraete
, D.
, Trilla
, J.
, Stevens
, T.
, Rogiers
, F.
, Stevens
, S.
, and Ceyssens
, F.
, 2006, “Development of a Gas Turbine With a 20 mm Rotor: Review and Perspectives
,” Proceedings of Power MEMS 2006
.6.
Tanaka
, S.
, Isomura
, K.
, Togo
, S.
, and Esashi
, M.
, 2004, “Turbo Test Rig With Hydroinertia Air Bearings for a Palmtop Gas Turbine
,” J. Micromech. Microeng.
0960-1317, 14
, pp. 1449
–1454
.7.
Salehi
, M.
, Heshmat
, H.
, Walton
, J. F.
, II, and Tomaszewski
, M.
, 2007, “Operation of a Mesoscopic Gas Turbine Engine Simulator at Speeds in Excess of 700,000 rpm on Foil Bearing
,” ASME J. Eng. Gas Turbines Power
0742-4795, 129
, pp. 170
–176
.8.
Agrawal
, G. L.
, 1997, “Foil Air/Gas Bearing Technology—An Overview
,” ASME Paper No. 97-GT-347.9.
“
Capstone Microturbine Solutions Product Index
,” available at http://microturbine.com/prodsol/products/index.asphttp://microturbine.com/prodsol/products/index.asp.10.
“
Samsung Techwin Product Line
,” available at http://www.samsungtechwin.comhttp://www.samsungtechwin.com.11.
Lee
, Y.
, Ryu
, K.
, and Kim
, C. H.
, 2004, “Preliminary Test Results of Rotordynamic Characteristics for 100 Watts Class Micro Power System
,” Proceedings of Power MEMS 2004
.12.
Ehrfeld
, W.
, Hessel
, V.
, Lowe
, H.
, Schilz
, C.
, and Weber
, L.
, 1999, “Materials of LIGA Technology
,” Springer Microsystem Technologies
, 5
, pp. 105
–112
.13.
Kim
, D.
, Lee
, S.
, Bryant
, M. D.
, and Ling
, F. F.
, 2004, “Hydrodynamic Performances of Gas Microbearing
,” ASME J. Tribol.
0742-4787, 126
(4
), pp. 711
–718
.14.
Kim
, D.
, Lee
, S.
, Jin
, Y.
, Desta
, Y.
, Bryant
, M. D.
, and Goettert
, J.
, 2004, “Micro Gas Bearings Fabricated by Deep X-Ray Lithography
,” Microsyst. Technol.
, 10
, pp. 456
–461
. 0946-707615.
“
NASA Oil Free Turbomachinery Program
,” available at http://www.grc.nasa.gov/WWW/Oilfree/bearings.htmhttp://www.grc.nasa.gov/WWW/Oilfree/bearings.htm.16.
Kim
, D.
, 2007, “Parametric Studies on Static and Dynamic Performance of Air Foil Bearings With Different Top Foil Geometries and Bump Stiffness Distributions
,” ASME J. Tribol.
0742-4787, 129
, pp. 354
–364
.17.
Hamrock
, B. J.
, Schmid
, S. R.
, and Jacobson
, B. O.
, 2004, Fundamentals of Fluid Film Lubrication
, Dekker
, New York
.18.
“
Description of SU-8
,” available at www.microchem.comwww.microchem.com.19.
Timoshenko
, S. P.
, 1983, Strength of Materials
, 3rd ed., Krieger
, New York
, Pts. 1 and 2.20.
Salehi
, M.
, Heshmat
, H.
, and Walton
, J. F.
, 2003, “On the Frictional Damping Characterization of Compliant Bump Foils
,” ASME J. Tribol.
0742-4787, 125
, pp. 804
–813
.21.
Song
, J.
, and Kim
, D.
, 2007, “Foil Gas Bearing With Compression Springs: Analyses and Experiments
,” ASME J. Tribol.
0742-4787, 129
, pp. 628
–639
.22.
Rubio
, D.
, and San Andrés
, L.
, 2007, “Structural Stiffness, Dry Friction Coefficient, and Equivalent Viscous Damping in a Bump-Type Foil Gas Bearing
,” ASME J. Eng. Gas Turbines Power
0742-4795, 129
, pp. 494
–502
.23.
Ku
, C. P.
, and Heshmat
, H.
, 1994, “Structural Stiffness and Coulomb Damping in Compliant Foil Journal Bearing: Parametric Studies
,” STLE Tribol. Trans.
1040-2004, 37
(3
), pp. 455
–462
.24.
Kim
, D.
, Lee
, A.
, and Kim
, Y.
, 2008, “Hybrid Air Foil Journal Bearings with External Hydrostatic Pressure Supplies
,” IP disclosure made to the University of Texas at Arlington Office of Technology, Reference No. 8-60.25.
Timoshenko
, S. P.
, and Goodier
, J. N.
, 1970, Theory of Elasticity
, McGraw-Hill
, New York
, pp. 90
–92
.26.
Sim
, K.
, and Kim
, D.
, 2007, “Design of Flexure Pivot Tilting Pads Gas Bearings for High-Speed Oil-Free Microturbomachinery
,” ASME J. Tribol.
0742-4787, 129
, pp. 112
–119
.27.
Kim
, D.
, and Park
, S.
, 2009, “Hydrostatic Air Foil Bearings: Analytical and Experimental Investigations
,” Tribol. Int.
, 42
, pp. 413
–425
. 0742-478728.
Kim
, D.
, and Kumar
, M.
, 2009, “Load Capacity Measurements of Hydrostatic Bump Foil Bearing
,” ASME Paper No. GT2009-59286.29.
Kim
, T.
, and San Andrés
, L.
, 2005, “Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data
,” ASME Paper No. GT2005-68486.30.
San Andrés
, L.
, Rubio
, D.
, and Kim
, T. H.
, 2007, “Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions
,” ASME J. Eng. Gas Turbines Power
0742-4795, 129
, pp. 850
–857
.31.
Kumar
, M.
, and Kim
, D.
, 2008, “Parametric Studies on Dynamic Performance of Hybrid Airfoil Bearing
,” ASME J. Eng. Gas Turbines Power
0742-4795, 130
(6
), p. 062501
.32.
Kim
, D.
, Rimpel
, A. M.
, Chang
, S. S.
, and Kim
, J. H.
, 2009, “Design and Manufacturing of Mesoscale Tilting Pad Gas Bearings for 100–200W Class Power MEMS Applications
,” ASME J. Eng. Gas Turbines Power
131
, p. 042503
. 0742-478733.
Pan
, C. H. T.
, and Kim
, D.
, 2007, “Stability Characteristics of a Rigid Rotor Supported by a Gas-Lubricated Spiral-Groove Conical Bearing
,” ASME J. Tribol.
0742-4787, 129
, pp. 375
–383
.34.
Peng
, J. P.
, and Carpino
, M.
, 1993, “Calculation of Stiffness and Damping Coefficients for Elastically Supported Gas Foil Bearings
,” ASME J. Tribol.
0742-4787, 115
(1
), pp. 20
–27
.35.
Sim
, K.
, and Kim
, D.
, 2006, “Stability Analyses on Flexure Pivot Tilting Pad Gas Bearings for Microturbomachinery
,” ASME Paper No. IJTC 2006-12158.36.
Lund
, J. W.
, 1968, “Calculation of Stiffness and Damping Properties of Gas Bearings
,” J. Lubr. Technol.
0022-2305, 90
(4
), pp. 793
–803
.37.
Wilde
, D.
, and San Andrés
, L.
, 2003, “Comparison of Rotordynamic Analysis Predictions With the Test Response of Simple Gas Hybrid Bearings for Oil-Free Turbomachinery
,” ASME Paper GT-2003-38859.38.
Chapra
, S. C.
, and Canale
, R. P.
, 1989, Numerical Methods for Engineers
, McGraw-Hill
, New York
, pp. 631
–634
.Copyright © 2009
by American Society of Mechanical Engineers
You do not currently have access to this content.
