... in the premixer are more susceptible to overheating and damage. acoustic waves combustion combustion equipment flames fuel syngas thermal stability 2012 American Society of Mechanical Engineers ...

... that on alloy CMSX-4, which could be related to the high thermal stability of the bond coat on alloy MAR M 002DS. From a detailed microstructural characterization, this difference in behavior could be explained at least partially in terms of variation in chemical composition of the two alloys, which was also...

... diffusion flames nitrogen compounds stratified flow thermal stability Following the deregulation of the electric power industry, the integrated gasification combined cycle (IGCC) power plant has become increasingly interesting to power producers, due to its increased efficiency and reduced...

... of the model. The THD numerical simulations can provide more accurate understandings of thermal behaviors of gas bearing systems and allow identifying important design parameters for thermal stability. Figure 9 shows the rotor temperature along the nondimensional rotor axis ( Z = z ∕ L...

...-temperature strength, thermal stability, oxidation resistance, and fatigue resistance. In this paper, the properties of 12 solid-solution-strengthened and six age-hardenable heat-resistant alloys are compared. Weldability is an important attribute and can be a major limiting factor in the use of certain...

... highest thermal stability fuel. An analytical model for oxygen permeation through the membrane was formulated, and used in conjunction with the test data to estimate the filter size required for a practical (i.e., low-volume/high flow rate) deoxygenator. The results demonstrate the feasibility...

... by the material’s long-term metallurgical stability at the actual operating conditions encountered in service. gas turbines life testing materials testing stress effects high-temperature effects failure (mechanical) mechanical properties thermal stability materials coatings 01 Nov 1999...

..., respectively) and with JP - 8 + 100 , which includes special thermal stability additives. The test results can be used to define guidelines to support fuel heat exchanger/thermal management system design and implementation, as well as to broaden the database available for validating and upgrading...