An investigation was conducted to verify experimentally the existence of thermal rectification and to determine the effect of surface roughness and material type. Four pairs of test specimens were evaluated: one with a smooth Nickel 200 surface in contact with a rough Nickel 200 surface, one with a smooth Stainless Steel 304 surface in contact with a rough Stainless Steel 304 surface, one with a smooth Nickel 200 surface in contact with a rough Stainless Steel 304 surface, and finally, one with a smooth Stainless Steel 304 surface in contact with a rough Nickel 200 surface. The thermal contact conductance was measured for heat flow from both the smooth to rough and rough to smooth configurations for all four pairs. The results indicate that thermal rectification is a function of surface characteristics, material type, and heat flow direction. For similar materials in contact, some thermal rectification was observed with heat flow from the rough surface to the smooth surface resulting in a higher value of contact conductance. For dissimilar materials, the thermal contact conductance was highest when the heat flow was from the Stainless Steel 304 to Nickel 200. In these cases, the surface roughness was shown to be of secondary importance.
Skip Nav Destination
Article navigation
Research Papers
Thermal Rectification in Similar and Dissimilar Metal Contacts
P. F. Stevenson,
P. F. Stevenson
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
Search for other works by this author on:
G. P. Peterson,
G. P. Peterson
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
Search for other works by this author on:
L. S. Fletcher
L. S. Fletcher
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
Search for other works by this author on:
P. F. Stevenson
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
G. P. Peterson
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
L. S. Fletcher
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
J. Heat Transfer. Feb 1991, 113(1): 30-36 (7 pages)
Published Online: February 1, 1991
Article history
Received:
August 21, 1989
Revised:
June 11, 1990
Online:
May 23, 2008
Citation
Stevenson, P. F., Peterson, G. P., and Fletcher, L. S. (February 1, 1991). "Thermal Rectification in Similar and Dissimilar Metal Contacts." ASME. J. Heat Transfer. February 1991; 113(1): 30–36. https://doi.org/10.1115/1.2910547
Download citation file:
Get Email Alerts
Cited By
Entropic Analysis of the Maximum Output Power of Thermoradiative Cells
J. Heat Mass Transfer
Molecular Dynamics Simulations in Nanoscale Heat Transfer: A Mini Review
J. Heat Mass Transfer
Related Articles
Thermal Contact Conductance of Spherical Rough Metals
J. Heat Transfer (November,1997)
Prediction of Thermal Contact Conductance in Vacuum by Statistical Mechanics
J. Heat Transfer (February,1998)
Recent Developments in Contact Conductance Heat Transfer
J. Heat Transfer (November,1988)
Thermal Contact Conductance of Metallic Coated BiCaSrCuO Superconductor/Copper Interfaces at Cryogenic Temperatures
J. Heat Transfer (February,1992)
Related Proceedings Papers
Related Chapters
How to Use this Book
Thermal Spreading and Contact Resistance: Fundamentals and Applications
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
Introduction
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow