..., as the buoyancy effect increases, the pressure in the stagnation region falls below the atmospheric pressure and rises toward the exit. 1 Corresponding author. e-mail:  bugrasarper@tarsus.edu.tr 26 04 2023 01 11 2023 21 11 2023 jet impingement convection laminar inter-surface...

...; published online January 3, 2013. Assoc. Editor: Giulio Lorenzini. 26 12 2011 13 08 2012 Although an extensively studied classical subject, laminar natural convection heat transfer from the vertical surface of a cylinder has generated some recent interest in the literature...

... 02 12 2011 07 06 2012 08 06 2012 radiation jet-impingement buoyancy convection laminar coupled The use of submerged jet-impingement is beneficial in a variety of applications involving cooling and drying of spatially concentrated targets. Exploiting the advantages...

...Sujoy Kumar Saha The heat transfer and the pressure drop characteristics of laminar flow of viscous oil ( 175 < Pr < 538 ) through rectangular and square ducts with combined internal axial corrugations on all the surfaces of the ducts and with twisted-tape inserts with and without oblique...

.... , Tucker , P. G. , and Roychowdhury , D. G. , 2003 , “ Unsteady Laminar Flow and Convective Heat Transfer in a Sharp 180° Bend ,” Int. J. Heat Fluid Flow , 24 , pp. 67 – 76 . Chung , Y. M. , and Luo , K. H. , 2002 , “ Unsteady Heat Transfer Analysis of an Impinging Jet ,” ASME J...

...Kiari Boulama; Nicolas Galanis Exact analytical solutions for fully-developed, steady-state laminar mixed convection with heat and mass transfer between vertical parallel plates are presented. The thermal boundary conditions are UWT or UHF while the concentration at each wall is assumed...

... in these two passages for incompressible laminar flow. These correlations require knowledge of local and average heat transfer for unobstructed fluid flowing through these passages with sufficient accuracy. Because existing correlations lack sufficient accuracy, this presentation includes an appendix...

... and duct, under the conditions of laminar flow, a low-profile block (height/length<0.5), and a low blockage effect (β⩾0.5). Contributed by the Heat Transfer Division for publication in the JOURNAL OF HEAT TRANSFER . Manuscript received by the Heat Transfer Division May 16, 2003; revision received...

... or better for most duct shapes. In cartesian coordinates the governing equation for fully developed laminar flow in a constant cross-sectional area duct is (5) ∂ 2 w ∂ x 2 + ∂ 2 w ∂ y 2 = 1 μ dp dz which represents...

... in the JOURNAL OF HEAT TRANSFER . Manuscript received by the Heat Transfer Division February 11, 2002; revision received October 30, 2003. Associate Editor: V. Prasad. 11 February 2002 30 October 2003 10 03 2004 channel flow boundary layers natural convection flow separation laminar...

... and Fluid Flow in Microchannels ,” Int. J. Heat Mass Transfer , 40 , pp. 3079 – 3088 . Tao , L. N. , 1962 , “ The Second Fundamental Problem in Heat Transfer of Laminar Forced Convection ,” ASME J. Appl. Mech. , 29 , pp. 415 – 420 . Maynes , D. , and Webb , B. W. , 2003...

..., 2003. Associate Editor: H. Bau. 03 May 2002 21 March 2003 17 07 2003 convection flow through porous media confined flow temperature distribution mass transfer diffusion Double Diffusion Heat Transfer Laminar Mass Transfer Porous Media During the last...

... 05 2003 jets heat transfer compressible flow subsonic flow Knudsen flow Mach number slip flow Computational Forced Convection Heat Transfer Impingement Jets Laminar Microscale Rarefied 9 Local Nusselt number distribution illustrating the effect of slip...

...L. B. Y. Aldabbagh; I. Sezai; A. A. Mohamad The flow and heat transfer characteristics of an impinging laminar square jet through cross-flow have been investigated numerically by using the three-dimensional Navier-Stokes and energy equations in steady state. The simulations have been carried out...

... stream velocity are the primary aerodynamics influencing heat transfer. Two regions with distinct flow characteristics are observed: the stagnation region, and the wall-jet region. According to the linear form of the energy equation, the surface heat flux may be decomposed into laminar and turbulent...

...Himadri Chattopadhyay; Sujoy K. Saha Laminar flow and heat transfer on a moving surface due to a bank of impinging slot jets have been numerically investigated. Two types of jet, namely axial and knife-jet with an exit angle of 60 deg were considered. The surface velocity up to two times the jet...

... confined flow nozzles fluid oscillations Computational Heat Transfer Impingment Laminar Unsteady Impinging jets have been used in a variety of practical engineering applications to enhance heat transfer due to the high local heat transfer coefficient. Examples include quenching...

...Yun Chin; Muthu S. Lakshminarasimhan; Qing Lu; D. Keith Hollingsworth; Larry C. Witte A calibrated thermochromic liquid crystal technique was used to acquire wall temperature data for laminar and turbulent forced convection in an asymmetrically heated channel. The experiments were carried out...

...Bassam A/K Abu-Hijleh The problem of laminar mixed convection from an isothermal cylinder with low conductivity baffles in cross flow was solved numerically. The average Nusselt number was calculated at different combinations of number of baffles, baffle height, Reynolds number, and buoyancy...

...A. Nakayama, Professor; F. Kuwahara, Associate Professor; T. Umemoto, Graduate Student; T. Hayashi, Graduate Student A numerical experiment at a pore scale using a full set of Navier-Stokes and energy equations has been conducted to simulate laminar fluid flow and heat transfer through...