The side-wall curl occurring in the sheet-metal forming process of a flanged channel was examined by a proposed theoretical model in the present study. Since the side-wall curl results from the elastic recovery of the plastically deformed sheet metal, the stress distribution produced in the forming process is examined. In the theoretical model, the deformation of the sheet metal drawn over the die shoulder is assumed to be subjected to bending, sliding, and unbending processes, in which only the sliding process contributes to the frictional force. The governing equations derived from the theoretical model were solved by a numerical procedure, and the stress distribution through the sheet thickness was obtained to calculate the side-wall curl. The proposed model was validated by the finite element simulations both quantitatively and qualitatively, and by the experimental data obtained from the published literature qualitatively. By using the proposed model, the effects of the process parameters on the side-wall curl were investigated.
Skip Nav Destination
e-mail: fkchen@ccms.ntu.edu.tw
Article navigation
Technical Papers
Deformation Analysis of Side-Wall Curl in the Sheet-Metal Forming of Flanged Channels
Fuh-Kuo Chen, Professor,
e-mail: fkchen@ccms.ntu.edu.tw
Fuh-Kuo Chen, Professor
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, R.O.C.
Search for other works by this author on:
Pao-Ching Tseng, Graduate Student
Pao-Ching Tseng, Graduate Student
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, R.O.C.
Search for other works by this author on:
Fuh-Kuo Chen, Professor
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, R.O.C.
e-mail: fkchen@ccms.ntu.edu.tw
Pao-Ching Tseng, Graduate Student
Department of Mechanical Engineering, National Taiwan University, Taipei, Taiwan, R.O.C.
Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING. Manuscript received August 23, 2002; Revised March 26, 2004. Associate Editor: S. Schmid.
J. Manuf. Sci. Eng. May 2005, 127(2): 369-375 (7 pages)
Published Online: April 25, 2005
Article history
Received:
August 23, 2002
Revised:
March 26, 2004
Online:
April 25, 2005
Citation
Chen, F., and Tseng, P. (April 25, 2005). "Deformation Analysis of Side-Wall Curl in the Sheet-Metal Forming of Flanged Channels ." ASME. J. Manuf. Sci. Eng. May 2005; 127(2): 369–375. https://doi.org/10.1115/1.1794163
Download citation file:
Get Email Alerts
Cited By
In-Situ Monitoring and Its Correlation to Mechanical Properties in Additively Manufactured 718 Ni Alloy
J. Manuf. Sci. Eng (March 2025)
NoodlePrint: Cooperative Multi-Robot Additive Manufacturing With Helically Interlocked Tiles
J. Manuf. Sci. Eng (June 2025)
Related Articles
Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming—Cylindrical Cup Drawing
J. Manuf. Sci. Eng (February,2005)
A Study of Early Stage Self-Loosening of Bolted Joints
J. Mech. Des (September,2003)
Analysis of Tube Hydroforming by Means of an Inverse Approach
J. Manuf. Sci. Eng (May,2003)
Determination of Proper Temperature Distribution for Warm Forming of Aluminum Sheet Materials
J. Manuf. Sci. Eng (August,2006)
Related Proceedings Papers
Related Chapters
Study on Weld-Line Movement of TWBs with Different Thickness in Hydro-Forming Deep Drawing of Square Cup
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition
Data Tabulations
Structural Shear Joints: Analyses, Properties and Design for Repeat Loading