This paper deals with the stiffness computation and model identification of parallel kinematic machine tools (PKMs). Due to their high dynamic abilities, PKMs are subjected to high inertial and cutting loads while machining. These loads generate structure deflection, and it results in a low level of accuracy compared with serial machines. The aim of this paper is to present a “compact” and predictable model of PKM. This model could be useful to optimize part positioning in the workspace or adapt machining strategies in order to minimize the influence of structure deflections. The proposed model takes into account legs’ and joints’ compliances. Considering the geometry of most of parallel architectures, the legs are modeled as beams. The focus, here, is particularly on joints’ models. In literature, when the compliance of joints is considered, it is most of the time modeled with a constant stiffness. In this paper, a different approach is proposed, based on a technical analysis of the joints. Models proposed are applied to an existing PKM: the Tricept. The parameters of this model (i.e., the stiffness of the joints) are then identified; thanks to experimental stiffness measurements done on an ABB 940 Tricept robot. This robot is used in the industry for machining operations, such as grinding or drilling. A discussion about identifiable parameters is performed so as to best fit with experimental measurements. Finally, this model is used to define a static workspace where the machined parts are within the tolerances for a given operation.
Skip Nav Destination
e-mail: bonnemains@ifma.fr
Article navigation
August 2009
Research Papers
Stiffness Computation and Identification of Parallel Kinematic Machine Tools
Thomas Bonnemains,
Thomas Bonnemains
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
e-mail: bonnemains@ifma.fr
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, France
Search for other works by this author on:
Hélène Chanal,
Hélène Chanal
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, France
Search for other works by this author on:
Belhassen-Chedli Bouzgarrou,
Belhassen-Chedli Bouzgarrou
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, France
Search for other works by this author on:
Pascal Ray
Pascal Ray
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, France
Search for other works by this author on:
Thomas Bonnemains
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, Francee-mail: bonnemains@ifma.fr
Hélène Chanal
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, France
Belhassen-Chedli Bouzgarrou
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, France
Pascal Ray
Laboratoire de Mécanique et Ingénieries, IFMA/UBP,
Campus de CLERMONT-FERRAND-Les Cézeaux
, BP 265, 63175 Aubière Cedex, FranceJ. Manuf. Sci. Eng. Aug 2009, 131(4): 041013 (7 pages)
Published Online: July 14, 2009
Article history
Received:
April 29, 2008
Revised:
May 26, 2009
Published:
July 14, 2009
Citation
Bonnemains, T., Chanal, H., Bouzgarrou, B., and Ray, P. (July 14, 2009). "Stiffness Computation and Identification of Parallel Kinematic Machine Tools." ASME. J. Manuf. Sci. Eng. August 2009; 131(4): 041013. https://doi.org/10.1115/1.3160328
Download citation file:
Get Email Alerts
Special Issue on the State-of-the-Art in Japanese Manufacturing Research
J. Manuf. Sci. Eng
A Review of Advanced Roll-to-Roll Manufacturing: System Modeling and Control
J. Manuf. Sci. Eng (April 2025)
Related Articles
Physics-Based Predictive Cutting Force Model in Ultrasonic-Vibration-Assisted Grinding for Titanium Drilling
J. Manuf. Sci. Eng (August,2009)
Quality and Inspection of Machining Operations: Tool Condition Monitoring
J. Manuf. Sci. Eng (August,2010)
An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part 2: Application
J. Manuf. Sci. Eng (February,2003)
Modeling of Forces for Drills With Chip-Breaking Grooves
J. Manuf. Sci. Eng (August,2004)
Related Proceedings Papers
Related Chapters
Accuracy of an Axis
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy
Theoretical Analysis and Experimental Study of Machinery Grinding on Zgmn13 Drilling Tool
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design