Volume 117 Issue 3 | J. Manuf. Sci. Eng.

Topics: Geometric modeling , Geometry , Manufacturing , Algorithms , Blanks , Electrical discharge machining , Machining , Computer software , Cutting tools , Kinematics

A Fuzzy Self-Learning Control Method with Application to Hydroforming Processes

H. J. Park, H. S. Cho

J. Eng. Ind. August 1995, 117(3): 297–303. doi: https://doi.org/10.1115/1.2804334

Abstract

View articletitled, A Fuzzy Self-Learning Control Method with Application to Hydroforming Processes

Open the PDF for in another window

Topics: Algorithms , Control equipment , Design , Pressure , Product quality , Sheet metal , Tracking control , Uncertainty

Analysis of Flow and Heat Transfer in Twin-Roll Strip Casting by Finite Element Method

S. M. Hwang, Y. H. Kang

J. Eng. Ind. August 1995, 117(3): 304–315. doi: https://doi.org/10.1115/1.2804335

Abstract

View articletitled, Analysis of Flow and Heat Transfer in Twin-Roll Strip Casting by Finite Element Method

Open the PDF for in another window

Topics: Casting , Finite element methods , Flow (Dynamics) , Heat transfer , Strips , Cooling , Finite element analysis , Process simulation , Shells

Static and Dynamic Characteristics of Spot Welded Sheet Metal Beams

K. Pal, D. L. Cronin

J. Eng. Ind. August 1995, 117(3): 316–322. doi: https://doi.org/10.1115/1.2804336

Abstract

View articletitled, Static and Dynamic Characteristics of Spot Welded Sheet Metal Beams

Open the PDF for in another window

Topics: Sheet metal , Finite element analysis , Cross section (Physics) , Finite element model , Mode shapes , Modeling , Steel sheet , Structural elements (Construction) , Testing , Torsion

Infrared Sensing for On-Line Weld Geometry Monitoring and Control

P. Banerjee, S. Govardhan, H. C. Wikle, J. Y. Liu, B. A. Chin

J. Eng. Ind. August 1995, 117(3): 323–330. doi: https://doi.org/10.1115/1.2804337

Abstract

View articletitled, Infrared Sensing for On-Line Weld Geometry Monitoring and Control

Open the PDF for in another window

Topics: Geometry , Temperature gradient , Gas metal arc welding , Sensors , Tungsten , Welding

Improving Milling Performance with High Pressure Waterjet Assisted Cooling / Lubrication

R. Kovacevic, C. Cherukuthota, R. Mohan

J. Eng. Ind. August 1995, 117(3): 331–339. doi: https://doi.org/10.1115/1.2804338

Abstract

View articletitled, Improving Milling Performance with High Pressure Waterjet Assisted Cooling / Lubrication

Open the PDF for in another window

Topics: Cooling , High pressure (Physics) , Lubrication , Milling , Machining , Coolants , Cutting , Lubricants , Metals , Modeling

Cutting Force Dynamics as a Tool for Surface Profile Monitoring in AWJ

R. Kovacevic, R. Mohan, Y. M. Zhang

J. Eng. Ind. August 1995, 117(3): 340–350. doi: https://doi.org/10.1115/1.2804339

Abstract

View articletitled, Cutting Force Dynamics as a Tool for Surface Profile Monitoring in AWJ

Open the PDF for in another window

Topics: Cutting , Dynamics (Mechanics) , Flow (Dynamics) , Fluctuations (Physics) , Nozzles , Vibration , Water pressure , Wavelength

A Consideration of Optimum Conditions for Surface Smoothing Based on Lubricating Mechanisms in Ironing Process

Z. Wang, K. Kondo, T. Mori

J. Eng. Ind. August 1995, 117(3): 351–356. doi: https://doi.org/10.1115/1.2804340

Abstract

View articletitled, A Consideration of Optimum Conditions for Surface Smoothing Based on Lubricating Mechanisms in Ironing Process

Open the PDF for in another window

Topics: Ironing (Metalworking) , Friction , Lubricants , Metal surfaces , Stress , Deformation , Flow (Dynamics) , Outflow

The Dynamics of Closed-Die Forging With Mechanical Presses

R. F. Scrutton, A. Marasco

J. Eng. Ind. August 1995, 117(3): 357–364. doi: https://doi.org/10.1115/1.2804341

Abstract

View articletitled, The Dynamics of Closed-Die Forging With Mechanical Presses

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Forging , Power presses , Stress , Flywheels , Kinetic energy

New Method for Estimating Residual Stresses in Pipe Made by Surfacing Weld

T. Terasaki, T. Akiyama, T. Ishimura

J. Eng. Ind. August 1995, 117(3): 365–371. doi: https://doi.org/10.1115/1.2804342

Abstract

View articletitled, New Method for Estimating Residual Stresses in Pipe Made by Surfacing Weld

Open the PDF for in another window

Topics: Pipes , Residual stresses , Cladding systems (Building) , Stress , Brass (Metal) , Composite materials , Steel

A BEM/FEM Framework for Simulation of a Plastic Workpiece Deformed by an Elastic Tool

A. J. Beaudoin, P. R. Dawson, S. Mukherjee

J. Eng. Ind. August 1995, 117(3): 372–377. doi: https://doi.org/10.1115/1.2804343

Abstract

View articletitled, A BEM/FEM Framework for Simulation of a Plastic Workpiece Deformed by an Elastic Tool

Open the PDF for in another window

Topics: Boundary element methods , Finite element methods , Simulation , Deflection , Forging , Geometry , Kinematics , Plane strain , Stress

Design Optimization of a Three Degrees-of-Freedom Variable-Reluctance Spherical Wrist Motor

R. B. Roth, Kok-Meng Lee

J. Eng. Ind. August 1995, 117(3): 378–388. doi: https://doi.org/10.1115/1.2804344

Abstract

View articletitled, Design Optimization of a Three Degrees-of-Freedom Variable-Reluctance Spherical Wrist Motor

Open the PDF for in another window

Topics: Degrees of freedom , Design , Engines , Motors , Optimization , Torque , Geometry , Electromagnetism , Engine design , Iron

An Adaptive Methodology for Machine Tool Error Correction

J. Mou, C. R. Liu

J. Eng. Ind. August 1995, 117(3): 389–399. doi: https://doi.org/10.1115/1.2804345

Abstract

View articletitled, An Adaptive Methodology for Machine Tool Error Correction

Open the PDF for in another window

Topics: Errors , Machine tools , Temperature effects , Cutting , Cutting tools , Dynamics (Mechanics) , Finishes , Inspection , Kinematics , Machinery

Integrating Optimal Experimental Design into the Design of a Multi-Axis Load Transducer

M. J. Wickham, D. R. Riley, C. J. Nachtsheim

J. Eng. Ind. August 1995, 117(3): 400–405. doi: https://doi.org/10.1115/1.2804346

Abstract

View articletitled, Integrating Optimal Experimental Design into the Design of a Multi-Axis Load Transducer

Open the PDF for in another window

Topics: Design , Experimental design , Stress , Transducers , Strain gages , Finite element analysis , Structural response analysis

Recursive Calibration of Industrial Manipulators by Adaptive Filtering

Y. L. Yao, S. M. Wu

J. Eng. Ind. August 1995, 117(3): 406–411. doi: https://doi.org/10.1115/1.2804347

Abstract

View articletitled, Recursive Calibration of Industrial Manipulators by Adaptive Filtering

Open the PDF for in another window

Topics: Calibration , Filtration , Manipulators , Robots , Errors , Kinematics , Noise (Sound) , Algorithms , Degrees of freedom , End effectors

Case Studies on Modeling Manufacturing Processes Using Artificial Neural Networks

Hua-Tzu Fan, S. M. Wu

J. Eng. Ind. August 1995, 117(3): 412–417. doi: https://doi.org/10.1115/1.2804348

Abstract

View articletitled, Case Studies on Modeling Manufacturing Processes Using Artificial Neural Networks

Open the PDF for in another window

Topics: Artificial neural networks , Manufacturing , Modeling , Neural network models , Probability , Algorithms , Compression molding , Experimental design , Painting , Particle filtering (numerical methods)

Thermal-Mechanical Modelling of the Rolling-Plus-Sliding With Frictional Heating of a Locomotive Wheel

V. Gupta, G. T. Hahn, P. C. Bastias, C. A. Rubin

J. Eng. Ind. August 1995, 117(3): 418–422. doi: https://doi.org/10.1115/1.2804349

Abstract

View articletitled, Thermal-Mechanical Modelling of the Rolling-Plus-Sliding With Frictional Heating of a Locomotive Wheel

Open the PDF for in another window

Topics: Heating , Locomotives , Modeling , Wheels , Temperature , Temperature distribution , Three-dimensional models , Cycles , Finite element model , Residual stresses

An Error Compensation Strategy for Replication by Rapid Prototyping

M. L. Philpott, P. A. Green

J. Eng. Ind. August 1995, 117(3): 423–429. doi: https://doi.org/10.1115/1.2804350

Abstract

View articletitled, An Error Compensation Strategy for Replication by Rapid Prototyping

Open the PDF for in another window

Topics: Error compensation , Rapid prototyping , Errors , Casting , Computer numerical control machine tools , Computer-aided design , Finishing , Geometry , Hardening (Curing) , Machining

Simultaneous In-Process Inspection of Surface Form and Roughness of Machined Sculptured Surfaces

M. L. Philpott, S. E. Mitchell, J. F. Tobolski, P. A. Green

J. Eng. Ind. August 1995, 117(3): 430–438. doi: https://doi.org/10.1115/1.2804351

Abstract

View articletitled, Simultaneous In-Process Inspection of Surface Form and Roughness of Machined Sculptured Surfaces

Open the PDF for in another window

Topics: Inspection , Surface roughness , Algorithms , Computer software , Manufacturing systems

Surface Roughness Measurement by Ultrasonic Sensing for In-Process Monitoring

Y. C. Shin, S. J. Oh, S. A. Coker

J. Eng. Ind. August 1995, 117(3): 439–447. doi: https://doi.org/10.1115/1.2804352

Abstract

View articletitled, Surface Roughness Measurement by Ultrasonic Sensing for In-Process Monitoring

Open the PDF for in another window

Topics: Surface roughness , Machining , Measurement systems , Robustness , Signals

Technical Papers

Helical Micro-Drill Point Design and Grinding

Geometric Modeling of Manufacturing Processes Using Symbolic and Computational Conjugate Geometry

A Fuzzy Self-Learning Control Method with Application to Hydroforming Processes

Analysis of Flow and Heat Transfer in Twin-Roll Strip Casting by Finite Element Method

Static and Dynamic Characteristics of Spot Welded Sheet Metal Beams

Infrared Sensing for On-Line Weld Geometry Monitoring and Control

Improving Milling Performance with High Pressure Waterjet Assisted Cooling / Lubrication

Cutting Force Dynamics as a Tool for Surface Profile Monitoring in AWJ

A Consideration of Optimum Conditions for Surface Smoothing Based on Lubricating Mechanisms in Ironing Process

The Dynamics of Closed-Die Forging With Mechanical Presses

New Method for Estimating Residual Stresses in Pipe Made by Surfacing Weld

A BEM/FEM Framework for Simulation of a Plastic Workpiece Deformed by an Elastic Tool

Design Optimization of a Three Degrees-of-Freedom Variable-Reluctance Spherical Wrist Motor

An Adaptive Methodology for Machine Tool Error Correction

Integrating Optimal Experimental Design into the Design of a Multi-Axis Load Transducer

Recursive Calibration of Industrial Manipulators by Adaptive Filtering

Case Studies on Modeling Manufacturing Processes Using Artificial Neural Networks

Thermal-Mechanical Modelling of the Rolling-Plus-Sliding With Frictional Heating of a Locomotive Wheel

An Error Compensation Strategy for Replication by Rapid Prototyping

Simultaneous In-Process Inspection of Surface Form and Roughness of Machined Sculptured Surfaces

Surface Roughness Measurement by Ultrasonic Sensing for In-Process Monitoring

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only