Volume 121 Issue 1 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 121, Issue 1

February 1999

ISSN 1087-1357

EISSN 1528-8935

Research Papers

Analysis of Burr Formation Mechanism in Orthogonal Cutting

M. Hashimura, Y. P. Chang, David Dornfeld

J. Manuf. Sci. Eng. February 1999, 121(1): 1–7. doi: https://doi.org/10.1115/1.2830569

Abstract

View articletitled, Analysis of Burr Formation Mechanism in Orthogonal Cutting

Open the PDF for in another window

Topics: Cutting , Deformation , Finite element methods , Machining , Materials properties , Micromachining , Optical microscopes , Scanning electron microscopes

Acoustic Emission Monitoring of Tool Wear in End-Milling Using Time-Domain Averaging

D. V. Hutton, F. Hu

J. Manuf. Sci. Eng. February 1999, 121(1): 8–12. doi: https://doi.org/10.1115/1.2830581

Abstract

View articletitled, Acoustic Emission Monitoring of Tool Wear in End-Milling Using Time-Domain Averaging

Open the PDF for in another window

Topics: Acoustic emissions , Milling , Wear , Signals , Signal processing

Effect of In-Plane Exit Angle and Rake Angles on Burr Height and Thickness in Face Milling Operation

M. Hashimura, J. Hassamontr, D. A. Dornfeld

J. Manuf. Sci. Eng. February 1999, 121(1): 13–19. doi: https://doi.org/10.1115/1.2830566

Abstract

View articletitled, Effect of In-Plane Exit Angle and Rake Angles on Burr Height and Thickness in Face Milling Operation

Open the PDF for in another window

Topics: Milling , Shapes , Cutting , Fractography , Stainless steel

Fixed-Load Electrolytic Dressing With Bronze Bonded Grinding Wheels

T. Bifano, R. Krishnamoorthy, H. Fawcett, E. Welch

J. Manuf. Sci. Eng. February 1999, 121(1): 20–27. doi: https://doi.org/10.1115/1.2830570

Abstract

View articletitled, Fixed-Load Electrolytic Dressing With Bronze Bonded Grinding Wheels

Open the PDF for in another window

Topics: Bronze , Grinding wheels , Stress , Wear , Diamonds , Blades , Grinding , Wheels , Ceramics , Machinery

The Design and Analysis of a Polypropylene Hub CBN Wheel to Suppress Grinding Chatter

D. M. McFarland, G. E. Bailey, T. D. Howes

J. Manuf. Sci. Eng. February 1999, 121(1): 28–31. doi: https://doi.org/10.1115/1.2830571

Abstract

View articletitled, The Design and Analysis of a Polypropylene Hub CBN Wheel to Suppress Grinding Chatter

Open the PDF for in another window

Topics: Chatter , Design , Grinding , Wheels , Aluminum , Grinding wheels , Vibration , Flanges , Stiffness

Residual Stresses and Workpiece Deformation Due to Polishing and Plating of Computer Hard Disk Substrates

B. E. Klamecki

J. Manuf. Sci. Eng. February 1999, 121(1): 32–40. doi: https://doi.org/10.1115/1.2830572

Abstract

View articletitled, Residual Stresses and Workpiece Deformation Due to Polishing and Plating of Computer Hard Disk Substrates

Open the PDF for in another window

Topics: Computers , Deformation , Disks , Plating , Polishing , Residual stresses , Stress , Aluminum alloys , Displacement , Model development

Workholding Stability in Shoe Centerless Grinding

Bi Zhang, Zhongxue Gan, Yanhua Yang, Trevor D. Howes

J. Manuf. Sci. Eng. February 1999, 121(1): 41–48. doi: https://doi.org/10.1115/1.2830573

Abstract

View articletitled, Workholding Stability in Shoe Centerless Grinding

Open the PDF for in another window

Topics: Grinding , Stability , Manufacturing industry , Surface quality

A Definition of the Topography of Grit-Blasted Surfaces for Plasma Sprayed Alumina Coatings

B. J. Griffiths, D. T. Gawne, G. Dong

J. Manuf. Sci. Eng. February 1999, 121(1): 49–53. doi: https://doi.org/10.1115/1.2830574

Abstract

View articletitled, A Definition of the Topography of Grit-Blasted Surfaces for Plasma Sprayed Alumina Coatings

Open the PDF for in another window

Topics: Coatings , Plasmas (Ionized gases) , Adhesion , Disks , Particulate matter , Raw materials , Texture (Materials)

Chatter Suppression via an Oscillating Cutter

F. Yang, B. Zhang, J. Yu

J. Manuf. Sci. Eng. February 1999, 121(1): 54–60. doi: https://doi.org/10.1115/1.2830575

Abstract

View articletitled, Chatter Suppression via an Oscillating Cutter

Open the PDF for in another window

Topics: Chatter , Cutting , Machining , Theoretical analysis , Machinery , Stability , Steel , Stepper motors , Surface quality

A Finite Element Study of Electromagnetic Riveting

E. A. Repetto, R. Radovitzky, M. Ortiz, R. C. Lundquist, D. R. Sandstrom

J. Manuf. Sci. Eng. February 1999, 121(1): 61–68. doi: https://doi.org/10.1115/1.2830576

Abstract

View articletitled, A Finite Element Study of Electromagnetic Riveting

Open the PDF for in another window

Topics: Finite element analysis , Riveting , Deformation , Rivets , Aerospace industry , Aluminum , Design , Finite element methods , Heating , Joining

Design and Simulation of an Entry Edge Guide Control System for Tandem Cold Mills

Remn-Min Guo, M. V. Loen

J. Manuf. Sci. Eng. February 1999, 121(1): 69–75. doi: https://doi.org/10.1115/1.2830577

Abstract

View articletitled, Design and Simulation of an Entry Edge Guide Control System for Tandem Cold Mills

Open the PDF for in another window

Topics: Control systems , Design , Simulation , Errors , Pressure , Proportional valves , Control equipment , Cylinders , Damage , Design methodology

Buckling Analysis of a Heated Steel Strip in a Continuous Annealing Furnace

H. Luo, W. S. Dunbar, J. E. Moore

J. Manuf. Sci. Eng. February 1999, 121(1): 76–83. doi: https://doi.org/10.1115/1.2830578

Abstract

View articletitled, Buckling Analysis of a Heated Steel Strip in a Continuous Annealing Furnace

Open the PDF for in another window

Topics: Annealing , Buckling , Furnaces , Steel , Strips , Heating , Finite element analysis , Design , Temperature , Tension

Dimensional Control of Stampings by Grid Strain Measurement

J. L. Duncan, S. M. Panton, Z-T. Zhang

J. Manuf. Sci. Eng. February 1999, 121(1): 84–86. doi: https://doi.org/10.1115/1.2830579

Abstract

View articletitled, Dimensional Control of Stampings by Grid Strain Measurement

Open the PDF for in another window

Topics: Design , Friction , Shapes , Strain measurement

Finite Element Geometry Creation Using Three-Dimensional Laser Profilometry

N. Jordache, S. M. Pandit, K. M. Cronin

J. Manuf. Sci. Eng. February 1999, 121(1): 87–92. doi: https://doi.org/10.1115/1.2830580

Abstract

View articletitled, Finite Element Geometry Creation Using Three-Dimensional Laser Profilometry

Open the PDF for in another window

Topics: Finite element analysis , Geometry , Lasers , Dimensional metrology , Interferometry , Machining , Modeling , Product engineering , Quality control , Robotics

Deposition Strategies and Resulting Part Stiffnesses in Fused Deposition Modeling

P. Kulkarni, D. Dutta

J. Manuf. Sci. Eng. February 1999, 121(1): 93–103. doi: https://doi.org/10.1115/1.2830582

Abstract

View articletitled, Deposition Strategies and Resulting Part Stiffnesses in Fused Deposition Modeling

Open the PDF for in another window

Topics: Modeling , Laminates , Stiffness , Design

An On-Line Monitoring System to Recognize Stitch Defects Through Thread Motion and High Speed Image Analyses

R. N. Cox, K. J. Titus, T. G. Clapp

J. Manuf. Sci. Eng. February 1999, 121(1): 104–108. doi: https://doi.org/10.1115/1.2830561

Abstract

View articletitled, An On-Line Monitoring System to Recognize Stitch Defects Through Thread Motion and High Speed Image Analyses

Open the PDF for in another window

Topics: Monitoring systems , Thread , Sensors , Signals , Data acquisition systems , Dynamics (Mechanics) , Inspection , Product quality , Vibration

Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology

A. Khan, D. Ceglarek, J. Shi, J. Ni, T. C. Woo

J. Manuf. Sci. Eng. February 1999, 121(1): 109–117. doi: https://doi.org/10.1115/1.2830562

Abstract

View articletitled, Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology

Open the PDF for in another window

Topics: Fault diagnosis , Optimization , Sensors , Design , Errors , Manufacturing , Automobiles , Fixturing , Pattern recognition

Impact Fracture of Screws for Disassembly

D. Studny, D. Rittel, E. Zussman

J. Manuf. Sci. Eng. February 1999, 121(1): 118–126. doi: https://doi.org/10.1115/1.2830563

Abstract

View articletitled, Impact Fracture of Screws for Disassembly

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture (Process) , Screws , Design , Fractography , Manufacturing , Recycling , Robotics , Transients (Dynamics)

Neural Adaptive Control for Positioning Fabric on a Frictional Surface

S. M. Shenoy, C. D. Rahn

J. Manuf. Sci. Eng. February 1999, 121(1): 127–133. doi: https://doi.org/10.1115/1.2830564

Abstract

View articletitled, Neural Adaptive Control for Positioning Fabric on a Frictional Surface

Open the PDF for in another window

Topics: Adaptive control , Textiles , Friction , Control equipment , Feedforward control , Jigs and fixtures , Manufacturing , Position control , Robustness , Sensors

Integration of Process Simulation in Machining Parameter Optimization

J. A. Stori, P. K. Wright, C. King

J. Manuf. Sci. Eng. February 1999, 121(1): 134–143. doi: https://doi.org/10.1115/1.2830565

Abstract

View articletitled, Integration of Process Simulation in Machining Parameter Optimization

Open the PDF for in another window

Topics: Machining , Optimization , Process simulation , Simulation , Design , Feedback , Nonlinear programming , Algorithms , Critical points (Physics) , Cutting

Tool Path Generation Using C-Space for 5-Axis Control Machining

K. Morishige, Y. Takeuchi, K. Kase

J. Manuf. Sci. Eng. February 1999, 121(1): 144–149. doi: https://doi.org/10.1115/1.2830567

Abstract

View articletitled, Tool Path Generation Using C-Space for 5-Axis Control Machining

Open the PDF for in another window

Topics: Machining , Collisions (Physics) , Shapes , Aircraft , Impellers , Milling

Technical Briefs

Non-Free Cutting and Its Degree of Freedom Confinement

H. Shi, X. Wang, Tao Lu

J. Manuf. Sci. Eng. February 1999, 121(1): 150–153. doi: https://doi.org/10.1115/1.2830568

Abstract

View articletitled, Non-Free Cutting and Its Degree of Freedom Confinement

Open the PDF for in another window

Topics: Cutting , Degrees of freedom , Cutting tools , Modeling

Research Papers

Analysis of Burr Formation Mechanism in Orthogonal Cutting

Acoustic Emission Monitoring of Tool Wear in End-Milling Using Time-Domain Averaging

Effect of In-Plane Exit Angle and Rake Angles on Burr Height and Thickness in Face Milling Operation

Fixed-Load Electrolytic Dressing With Bronze Bonded Grinding Wheels

The Design and Analysis of a Polypropylene Hub CBN Wheel to Suppress Grinding Chatter

Residual Stresses and Workpiece Deformation Due to Polishing and Plating of Computer Hard Disk Substrates

Workholding Stability in Shoe Centerless Grinding

A Definition of the Topography of Grit-Blasted Surfaces for Plasma Sprayed Alumina Coatings

Chatter Suppression via an Oscillating Cutter

A Finite Element Study of Electromagnetic Riveting

Design and Simulation of an Entry Edge Guide Control System for Tandem Cold Mills

Buckling Analysis of a Heated Steel Strip in a Continuous Annealing Furnace

Dimensional Control of Stampings by Grid Strain Measurement

Finite Element Geometry Creation Using Three-Dimensional Laser Profilometry

Deposition Strategies and Resulting Part Stiffnesses in Fused Deposition Modeling

An On-Line Monitoring System to Recognize Stitch Defects Through Thread Motion and High Speed Image Analyses

Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology

Impact Fracture of Screws for Disassembly

Neural Adaptive Control for Positioning Fabric on a Frictional Surface

Integration of Process Simulation in Machining Parameter Optimization

Tool Path Generation Using C-Space for 5-Axis Control Machining

Technical Briefs

Non-Free Cutting and Its Degree of Freedom Confinement

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only