Two-phase PZT-epoxy piezoelectric composites and three phase PZT-epoxy-Al composites were fabricated using a poling voltage of 0.2 kV/mm. The influence of aluminum inclusion size (nano and micron) and (lead zirconate titanate) PZT volume fraction on the dielectric properties of the three phase PZT-epoxy-aluminum composites were experimentally investigated. In general, dielectric and piezoelectric properties of the PZT-epoxy matrix were improved with the addition of aluminum particles. Composites that were comprised of micron scale aluminum inclusions demonstrated higher piezoelectric d33-strain-coefficients, and higher dielectric loss compared to composites that were comprised of nanosize aluminum inclusions. Specifically, composites comprised of micron sized aluminum particles and PZT volume fractions of 20%, 30%, and 40% had dielectric constants equal to 405.7, 661.4, and 727.8 (pC/N), respectively, while composites comprised of nanosize aluminum particles with the same PZT volume fractions, had dielectric constants equal to 233.28, 568.81, and 657.41 (pC/N), respectively. The electromechanical properties of the composites are influenced by several factors: inclusion agglomeration, contact resistance between particles, and air voids. These composites may be useful for several applications: structural health monitoring, energy harvesting, and acoustic liners.
Skip Nav Destination
Article navigation
October 2011
Research Papers
Influence of Al Particle Size and Lead Zirconate Titanate (PZT) Volume Fraction on the Dielectric Properties of PZT-Epoxy-Aluminum Composites
S. Banerjee,
S. Banerjee
Mechanical and Aerospace Engineering Department, Rutgers,
The State University of New Jersey
, Piscataway, NJ 08854-8058
Search for other works by this author on:
K. A. Cook-Chennault
K. A. Cook-Chennault
Mechanical and Aerospace Engineering Department, Rutgers,
The State University of New Jersey
, Piscataway, NJ 08854-8058; Center of Advanced Energy Systems, Rutgers, The State University of New Jersey, Piscataway, NJ 08854-8058
Search for other works by this author on:
S. Banerjee
Mechanical and Aerospace Engineering Department, Rutgers,
The State University of New Jersey
, Piscataway, NJ 08854-8058
K. A. Cook-Chennault
Mechanical and Aerospace Engineering Department, Rutgers,
The State University of New Jersey
, Piscataway, NJ 08854-8058; Center of Advanced Energy Systems, Rutgers, The State University of New Jersey, Piscataway, NJ 08854-8058J. Eng. Mater. Technol. Oct 2011, 133(4): 041016 (6 pages)
Published Online: October 20, 2011
Article history
Received:
March 14, 2011
Accepted:
July 22, 2011
Online:
October 20, 2011
Published:
October 20, 2011
Citation
Banerjee, S., and Cook-Chennault, K. A. (October 20, 2011). "Influence of Al Particle Size and Lead Zirconate Titanate (PZT) Volume Fraction on the Dielectric Properties of PZT-Epoxy-Aluminum Composites." ASME. J. Eng. Mater. Technol. October 2011; 133(4): 041016. https://doi.org/10.1115/1.4004812
Download citation file:
Get Email Alerts
Investigating Microstructure and Wear Characteristics of Alloy Steels Used as Wear Plates in Ballast Cleaning Operation in Railways
J. Eng. Mater. Technol (January 2025)
Related Articles
Thermal Property Measurements of Reactive Materials: The Macroscopic Behavior of a Nanocomposite
J. Heat Transfer (November,2012)
A Micromechanics-Based Elastoplastic Model for Amorphous Composites With Nanoparticle Interactions
J. Appl. Mech (May,2008)
High Thermal Conductive Si 3 N 4 Particle Filled Epoxy Composites With a Novel Structure
J. Electron. Packag (December,2007)
The Effect of Thermal Contact Resistance at Porous-Solid Interfaces in Finned Metal Foam Heat Sinks
J. Electron. Packag (December,2010)
Related Proceedings Papers
Related Chapters
Layer Arrangement Impact on the Electromechanical Performance of a Five-Layer Multifunctional Smart Sandwich Plate
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
Characterization and evaluation
Biocompatible Nanomaterials for Targeted and Controlled Delivery of Biomacromolecules
Characterization of Ultra-High Temperature and Polymorphic Ceramics
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation