Volume 116 Issue 1 | J. Eng. Mater. Technol.

Topics: Low density polyethylene , Shear (Mechanics) , Deformation , Plastics , Systems analysis , Viscoelasticity , Chain , Engineers , Junctions , Oscillations

Material Property Studies of Two High-Pressure Turbine Rotors for Remaining Life Assessment

V. P. Swaminathan, R. Viswanathan, C. P. Clark

J. Eng. Mater. Technol. January 1994, 116(1): 19–26. doi: https://doi.org/10.1115/1.2904250

Abstract

View articletitled, Material Property Studies of Two High-Pressure Turbine Rotors for Remaining Life Assessment

Open the PDF for in another window

Topics: High pressure (Physics) , Materials properties , Remaining life assessment , Rotors , Turbines , Fracture toughness , Augers , Temperature , ASTM International , Grain boundaries

Cumulative Damage Behavior of Anisotropic Al-6061-T6 as a Function of Axial-Torsional Loading Mode Sequence

Hong Lin, Hamid Nayeb-Hashemi, Charles A. Berg

J. Eng. Mater. Technol. January 1994, 116(1): 27–34. doi: https://doi.org/10.1115/1.2904252

Abstract

View articletitled, Cumulative Damage Behavior of Anisotropic Al-6061-T6 as a Function of Axial-Torsional Loading Mode Sequence

Open the PDF for in another window

Topics: Anisotropy , Damage , Fatigue testing , Torsion , Constitutive equations , Cracking (Materials) , Fatigue cracks , Fatigue damage , Fracture (Process) , Low cycle fatigue

On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy

A. Abdul-Latif, M. Clavel, V. Ferney, K. Saanouni

J. Eng. Mater. Technol. January 1994, 116(1): 35–44. doi: https://doi.org/10.1115/1.2904253

Abstract

View articletitled, On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy

Open the PDF for in another window

Topics: Constitutive equations , Deformation , Hardening , Heat treating (Metalworking) , Kinematics , Micromechanical devices , Modeling , Plasticity , Temperature

Influence of Environment and Creep on Fatigue Crack Growth in a High Temperature Aluminum Alloy 8009

K. V. Jata, D. Maxwell, T. Nicholas

J. Eng. Mater. Technol. January 1994, 116(1): 45–53. doi: https://doi.org/10.1115/1.2904254

Abstract

View articletitled, Influence of Environment and Creep on Fatigue Crack Growth in a High Temperature Aluminum Alloy 8009

Open the PDF for in another window

Topics: Aluminum alloys , Creep , Fatigue cracks , High temperature , Fracture (Materials) , Stress , Extruding , Fracture (Process) , Vacuum , Fatigue

Fatigue Behavior of a 22Cr-20Ni-18Co-Fe Alloy at Elevated Temperatures

T. H. Krukemyer, A. Fatemi, R. W. Swindeman

J. Eng. Mater. Technol. January 1994, 116(1): 54–61. doi: https://doi.org/10.1115/1.2904255

Abstract

View articletitled, Fatigue Behavior of a 22Cr-20Ni-18Co-Fe Alloy at Elevated Temperatures

Open the PDF for in another window

Topics: Alloys , Fatigue , Temperature , Cycles , Deformation , Fatigue life , Fatigue testing , Separation (Technology) , Stress

Analysis of Plastic Behavior to Cyclically Uniaxial Tests Using an Endochronic Approach

Wei-Ching Yeh, Jung-Yuan Cheng, Rong-Song Her

J. Eng. Mater. Technol. January 1994, 116(1): 62–68. doi: https://doi.org/10.1115/1.2904256

Abstract

View articletitled, Analysis of Plastic Behavior to Cyclically Uniaxial Tests Using an Endochronic Approach

Open the PDF for in another window

Topics: Hardening , Kinematics , Modeling , Plasticity , Stress

A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage

J. H. Lee, Y. Zhang

J. Eng. Mater. Technol. January 1994, 116(1): 69–79. doi: https://doi.org/10.1115/1.2904257

Abstract

View articletitled, A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage

Open the PDF for in another window

Topics: Compression , Cylinders , Damage , Deformation , Failure , Finite element analysis , Nucleation (Physics) , Plasticity , Work hardening , Stress

The Combined Effects of Notches and Microstructure on the Performance of Medium Carbon Steel Breakaway Couplings

D. P. Henkel, A. W. Pense

J. Eng. Mater. Technol. January 1994, 116(1): 80–84. doi: https://doi.org/10.1115/1.2904258

Abstract

View articletitled, The Combined Effects of Notches and Microstructure on the Performance of Medium Carbon Steel Breakaway Couplings

Open the PDF for in another window

Topics: Carbon steel , Couplings , Brittleness , Embrittlement , Fracture (Materials) , Fracture (Process) , Highways , Steel

Boundary Element Implementation of a Rough Crack Constitutive Model

M. P. Divakar, A. Fafitis

J. Eng. Mater. Technol. January 1994, 116(1): 85–89. doi: https://doi.org/10.1115/1.2904259

Abstract

View articletitled, Boundary Element Implementation of a Rough Crack Constitutive Model

Open the PDF for in another window

Topics: Boundary element methods , Constitutive equations , Fracture (Materials) , Surface roughness , Modeling , Boundary-value problems , Displacement , Micromechanics (Engineering) , Shear stress , Stiffness

High Temperature Multiaxial Low Cycle Fatigue of Cruciform Specimen

Takamoto Itoh, Masao Sakane, Masateru Ohnami

J. Eng. Mater. Technol. January 1994, 116(1): 90–98. doi: https://doi.org/10.1115/1.2904261

Abstract

View articletitled, High Temperature Multiaxial Low Cycle Fatigue of Cruciform Specimen

Open the PDF for in another window

Topics: High temperature , Low cycle fatigue , Fracture (Materials) , Cycles , Displacement , Fatigue , Stainless steel , Steel , Surface cracks

Effective Thermomechanical Behavior of Plain-Weave Fabric-Reinforced Composites Using Homogenization Theory

A. Dasgupta, S. M. Bhandarkar

J. Eng. Mater. Technol. January 1994, 116(1): 99–105. doi: https://doi.org/10.1115/1.2904262

Abstract

View articletitled, Effective Thermomechanical Behavior of Plain-Weave Fabric-Reinforced Composites Using Homogenization Theory

Open the PDF for in another window

Topics: Composite materials , Textiles , Thermomechanics , Damage , Design , Elastic moduli , Electronics , Epoxy adhesives , Epoxy resins , Failure

Fabrication of W-1%ThO₂ Reinforced Fe-25Cr-8Al-0.5Y Superalloy Matrix Composite

W. Armstrong, M. Ramulu, M. Taya

J. Eng. Mater. Technol. January 1994, 116(1): 106–112. doi: https://doi.org/10.1115/1.2904245

Abstract

View articletitled, Fabrication of W-1%ThO<sub>2</sub> Reinforced Fe-25Cr-8Al-0.5Y Superalloy Matrix Composite

Open the PDF for in another window

Topics: Composite materials , Manufacturing , Superalloys , Fibers , High temperature , Mechanical properties , Oxidation , Spraying (Coating processes) , Turning

Thermal Fatigue of Composites: Ultrasonic and SEM Evaluations

D. S. Forsyth, S. O. Kasap, I. Wacker, S. Yannacopoulos

J. Eng. Mater. Technol. January 1994, 116(1): 113–120. doi: https://doi.org/10.1115/1.2904246

Abstract

View articletitled, Thermal Fatigue of Composites: Ultrasonic and SEM Evaluations

Open the PDF for in another window

Topics: Composite materials , Fatigue , Aramid fibers , Damage , Fibers , Scanning electron microscopy , Carbon fibers , Cycles , Polymer composites

Bending Analysis of Laminated Composite Box Beams

A. K. Tripathy, H. J. Patel, S. S. Pang

J. Eng. Mater. Technol. January 1994, 116(1): 121–129. doi: https://doi.org/10.1115/1.2904247

Abstract

View articletitled, Bending Analysis of Laminated Composite Box Beams

Open the PDF for in another window

Topics: Composite materials , Stress , Deflection , Design , Weight (Mass) , Aircraft , Aluminum , Fibers , Finite element model , Laminates

Technical Briefs

Fractography of an Axle Which Broke Under Combined Bending Impact and Torsion

Alan A. Johnson

J. Eng. Mater. Technol. January 1994, 116(1): 130–131. doi: https://doi.org/10.1115/1.2904248

Abstract

View articletitled, Fractography of an Axle Which Broke Under Combined Bending Impact and Torsion

Open the PDF for in another window

Topics: Automobiles , Collisions (Physics) , Fractography , Fracture (Materials) , Fracture (Process) , Torsion , Vehicles , Wheels

Research Papers

Measurement of Near Surface Residual Stresses Using Electric Discharge Wire Machining

A Model for Friction in Metal Forming

How Affine is the Entanglement Network of Molten Low-Density Polyethylene in Large Amplitude Oscillatory Shear?

Material Property Studies of Two High-Pressure Turbine Rotors for Remaining Life Assessment

Cumulative Damage Behavior of Anisotropic Al-6061-T6 as a Function of Axial-Torsional Loading Mode Sequence

On the Modeling of Nonproportional Cyclic Plasticity of Waspaloy

Influence of Environment and Creep on Fatigue Crack Growth in a High Temperature Aluminum Alloy 8009

Fatigue Behavior of a 22Cr-20Ni-18Co-Fe Alloy at Elevated Temperatures

Analysis of Plastic Behavior to Cyclically Uniaxial Tests Using an Endochronic Approach

A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage

The Combined Effects of Notches and Microstructure on the Performance of Medium Carbon Steel Breakaway Couplings

Boundary Element Implementation of a Rough Crack Constitutive Model

High Temperature Multiaxial Low Cycle Fatigue of Cruciform Specimen

Effective Thermomechanical Behavior of Plain-Weave Fabric-Reinforced Composites Using Homogenization Theory

Fabrication of W-1%ThO₂ Reinforced Fe-25Cr-8Al-0.5Y Superalloy Matrix Composite

Thermal Fatigue of Composites: Ultrasonic and SEM Evaluations

Bending Analysis of Laminated Composite Box Beams

Technical Briefs

Fractography of an Axle Which Broke Under Combined Bending Impact and Torsion

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only