Volume 118 Issue 4 | J. Eng. Mater. Technol.

Skip Nav Destination

Technical Papers

A Dislocation Density Based Constitutive Model for Cyclic Deformation

Y. Estrin, H. Braasch, Y. Brechet

J. Eng. Mater. Technol. October 1996, 118(4): 441–447. doi: https://doi.org/10.1115/1.2805940

Abstract

View articletitled, A Dislocation Density Based Constitutive Model for Cyclic Deformation

Open the PDF for in another window

Topics: Constitutive equations , Deformation , Dislocation density , Dislocations , Alloys

High Temperature Densification Forming of Alumina Powder—Constitutive Model and Experiments

Y. S. Kwon, K. T. Kim

J. Eng. Mater. Technol. October 1996, 118(4): 448–455. doi: https://doi.org/10.1115/1.2805941

Abstract

View articletitled, High Temperature Densification Forming of Alumina Powder—Constitutive Model and Experiments

Open the PDF for in another window

Topics: Constitutive equations , High temperature , Creep , Forging , Sinter (Metallurgy) , Sintering , Ceramics , Hot pressing

Creep in Building Stones Under Tensile Conditions

S. Sorace

J. Eng. Mater. Technol. October 1996, 118(4): 456–462. doi: https://doi.org/10.1115/1.2805942

Abstract

View articletitled, Creep in Building Stones Under Tensile Conditions

Open the PDF for in another window

Topics: Building stone , Creep , Tension , Building materials , Ceramics , Damage , Fracture (Materials) , Mechanical properties , Metals , Structural analysis

The Prediction of the Flow Stress of an Extra-Low Carbon Steel in the Two-Phase Region Using Continuous Cooling Curves

Yhu-Jen Hwu, J. G. Lenard, J. J. M. Too

J. Eng. Mater. Technol. October 1996, 118(4): 463–470. doi: https://doi.org/10.1115/1.2805943

Abstract

View articletitled, The Prediction of the Flow Stress of an Extra-Low Carbon Steel in the Two-Phase Region Using Continuous Cooling Curves

Open the PDF for in another window

Topics: Carbon steel , Cooling , Flow (Dynamics) , Stress , Phase transitions , Temperature , Compression , Latent heat , Steel

Densification Forming of Alumina Powder—Effects of Power Law Creep and Friction

Y. S. Kwon, K. T. Kim

J. Eng. Mater. Technol. October 1996, 118(4): 471–477. doi: https://doi.org/10.1115/1.2805944

Abstract

View articletitled, Densification Forming of Alumina Powder—Effects of Power Law Creep and Friction

Open the PDF for in another window

Topics: Creep , Friction , Constitutive equations , Finite element analysis , Forging , High temperature , Hot pressing , Optimization , Sinter (Metallurgy) , Stress

Effect of Architecture on the Strength of Braided Tubes Under Biaxial Tension and Compression

L. V. Smith, S. R. Swanson

J. Eng. Mater. Technol. October 1996, 118(4): 478–484. doi: https://doi.org/10.1115/1.2805945

Abstract

View articletitled, Effect of Architecture on the Strength of Braided Tubes Under Biaxial Tension and Compression

Open the PDF for in another window

Topics: Compression , Tension , Braid (Textile) , Fibers , Compressive strength , Architecture , Carbon fibers , Cylinders , Failure , Manufacturing

Carbide Coarsening During Creep in 12 Percent CrMoV Steel

Rui Wu, Rolf Sandstro¨m

J. Eng. Mater. Technol. October 1996, 118(4): 485–492. doi: https://doi.org/10.1115/1.2805946

Abstract

View articletitled, Carbide Coarsening During Creep in 12 Percent CrMoV Steel

Open the PDF for in another window

Topics: Creep , Steel , Stress , Cavitation , Deformation , Ferrites (Magnetic materials) , Gages , Grain boundaries , Rupture , Temperature

Thermodynamic Law of Corresponding Shock States in Flexible Polymeric Foams

E. Zaretsky, G. Ben-Dor

J. Eng. Mater. Technol. October 1996, 118(4): 493–502. doi: https://doi.org/10.1115/1.2805947

Abstract

View articletitled, Thermodynamic Law of Corresponding Shock States in Flexible Polymeric Foams

Open the PDF for in another window

Topics: Plastic foam , Shock (Mechanics) , Equations of state , Foams (Chemistry) , Porosity , Bulk solids , Compressibility , Compression , Particulate matter , Polymer foams

A Study of the Dynamic Behavior of Elastomeric Materials Using Finite Elements

G. E. Vallee, Arun Shukla

J. Eng. Mater. Technol. October 1996, 118(4): 503–508. doi: https://doi.org/10.1115/1.2805948

Abstract

View articletitled, A Study of the Dynamic Behavior of Elastomeric Materials Using Finite Elements

Open the PDF for in another window

Topics: Elastomers , Finite element analysis , Compression , Constitutive equations , Deflection , Deformation , Finite element model , Numerical analysis , Pressure , Stress

A Unified Approach to Physically Based Weakest-Link Theories for Multiaxial Fracture of Ceramics

Franco M. Furgiuele, M. Laura Luchi

J. Eng. Mater. Technol. October 1996, 118(4): 509–514. doi: https://doi.org/10.1115/1.2805949

Abstract

View articletitled, A Unified Approach to Physically Based Weakest-Link Theories for Multiaxial Fracture of Ceramics

Open the PDF for in another window

Topics: Ceramics , Density , Fracture (Materials) , Fracture (Process) , Industrial ceramics , Reliability , Stress

An Experimental Study Evaluating Macroscopic Cavity Interactions as a Model of Microvoid Ductility

A. B. Geltmacher, P. Matic, D. P. Harvey, II

J. Eng. Mater. Technol. October 1996, 118(4): 515–521. doi: https://doi.org/10.1115/1.2805950

Abstract

View articletitled, An Experimental Study Evaluating Macroscopic Cavity Interactions as a Model of Microvoid Ductility

Open the PDF for in another window

Topics: Cavities , Ductility , Ductile fracture , Deformation , Displacement , Fracture (Materials) , Fracture (Process) , Geometry , Stress , Tension

Architecture of Functionally Graded Ceramic Coatings Against Surface Thermal Fracture

B. D. Choules, K. Kokini

J. Eng. Mater. Technol. October 1996, 118(4): 522–528. doi: https://doi.org/10.1115/1.2805951

Abstract

View articletitled, Architecture of Functionally Graded Ceramic Coatings Against Surface Thermal Fracture

Open the PDF for in another window

Topics: Ceramic coatings , Fracture (Materials) , Fracture (Process) , Coatings , Stress , Fatigue , Relaxation (Physics) , Cooling , Diluents , Euler-Bernoulli beam theory

Life Prediction of Notched Specimens Using Multiaxial Surface and Subsurface Strain Analyses

G. Shatil, D. J. Smith

J. Eng. Mater. Technol. October 1996, 118(4): 529–534. doi: https://doi.org/10.1115/1.2805952

Abstract

View articletitled, Life Prediction of Notched Specimens Using Multiaxial Surface and Subsurface Strain Analyses

Open the PDF for in another window

Topics: Anisotropy , Fatigue , Fatigue life , Finite element analysis , Geometry , Simulation , Structural steel

Design Curve to Characterize Fatigue Strength

C. L. Shen, P. H. Wirsching, G. T. Cashman

J. Eng. Mater. Technol. October 1996, 118(4): 535–541. doi: https://doi.org/10.1115/1.2805953

Abstract

View articletitled, Design Curve to Characterize Fatigue Strength

Open the PDF for in another window

Topics: Design , Fatigue strength , Electromagnetic scattering , Fatigue

Correlation of Tensile and Bending Strength of Composites With a Circular Hole

Yi Zhao, Su-Seng Pang, Chihdar Yang

J. Eng. Mater. Technol. October 1996, 118(4): 542–547. doi: https://doi.org/10.1115/1.2805954

Abstract

View articletitled, Correlation of Tensile and Bending Strength of Composites With a Circular Hole

Open the PDF for in another window

Topics: Bending strength , Composite materials , Finite element analysis , Plates (structures) , Tension

A Probabilistic Micromechanics Model for Damaged Composites

J. Mark Duva, Jacob Aboudi, Carl T. Herakovich

J. Eng. Mater. Technol. October 1996, 118(4): 548–553. doi: https://doi.org/10.1115/1.2805955

Abstract

View articletitled, A Probabilistic Micromechanics Model for Damaged Composites

Open the PDF for in another window

Topics: Composite materials , Micromechanics (Engineering) , Modeling , Constitutive equations , Damage , Fiber reinforced composites , Fibers , Shear (Mechanics) , Silicon , Stress

Analysis and Testing of Dynamic Micromechanical Behavior of Composite Materials at Elevated Temperatures

R. H. Pant, R. F. Gibson

J. Eng. Mater. Technol. October 1996, 118(4): 554–560. doi: https://doi.org/10.1115/1.2805956

Abstract

View articletitled, Analysis and Testing of Dynamic Micromechanical Behavior of Composite Materials at Elevated Temperatures

Open the PDF for in another window

Topics: Composite materials , Temperature , Testing , Fibers , Damping , High temperature , Micromechanics (Engineering) , Vibration tests , Boron , Epoxy adhesives

Nonlinear Elastic Behavior of Unidirectional Composites With Fiber Waviness Under Compressive Loading

H. M. Hsiao, I. M. Daniel

J. Eng. Mater. Technol. October 1996, 118(4): 561–570. doi: https://doi.org/10.1115/1.2805957

Abstract

View articletitled, Nonlinear Elastic Behavior of Unidirectional Composites With Fiber Waviness Under Compressive Loading

Open the PDF for in another window

Topics: Composite materials , Elasticity , Fibers , Compression , Constitutive equations , Carbon , Epoxy adhesives , Epoxy resins , Materials properties , Shear (Mechanics)

A Study on the Distribution of Residual Stress Due to Surface Induction Hardening

Dong-hui Xu, Zhen-Bang Kuang

J. Eng. Mater. Technol. October 1996, 118(4): 571–575. doi: https://doi.org/10.1115/1.2805958

Abstract

View articletitled, A Study on the Distribution of Residual Stress Due to Surface Induction Hardening

Open the PDF for in another window

Topics: Electromagnetic induction , Hardening , Stress , Finite element methods , Latent heat , Plasticity , Residual stresses , Stress concentration

Measuring Method for Residual Stresses in Explosively Clad Plates and a Method of Residual Stress Reduction

Y. Ueda, H. Murakawa, N. X. Ma

J. Eng. Mater. Technol. October 1996, 118(4): 576–582. doi: https://doi.org/10.1115/1.2805959

Abstract

View articletitled, Measuring Method for Residual Stresses in Explosively Clad Plates and a Method of Residual Stress Reduction

Open the PDF for in another window

Topics: Plates (structures) , Residual stresses , Stress , Pipe joints , Zirconium , Elastic analysis , Finite element methods , Finite element model

Determination of Biaxial Residual Stresses by a Holographic-Hole Drilling Technique

A. Makino, D. V. Nelson, E. A. Fuchs, D. R. Williams

J. Eng. Mater. Technol. October 1996, 118(4): 583–588. doi: https://doi.org/10.1115/1.2805960

Abstract

View articletitled, Determination of Biaxial Residual Stresses by a Holographic-Hole Drilling Technique

Open the PDF for in another window

Topics: Drilling , Residual stresses , Stress , Holographic interferometry , Diffraction patterns , Displacement , Holography , Optical interference , Strain gages

Role of Welding Parameters in Determining the Geometrical Appearance of Weld Pool

R. Kovacevic, Z. N. Cao, Y. M. Zhang

J. Eng. Mater. Technol. October 1996, 118(4): 589–596. doi: https://doi.org/10.1115/1.2805961

Abstract

View articletitled, Role of Welding Parameters in Determining the Geometrical Appearance of Weld Pool

Open the PDF for in another window

Topics: Welding , Computer simulation , Fluid dynamics , Shapes , Deformation , Heat transfer , Machinery , Temperature distribution

Technical Papers

A Dislocation Density Based Constitutive Model for Cyclic Deformation

High Temperature Densification Forming of Alumina Powder—Constitutive Model and Experiments

Creep in Building Stones Under Tensile Conditions

The Prediction of the Flow Stress of an Extra-Low Carbon Steel in the Two-Phase Region Using Continuous Cooling Curves

Densification Forming of Alumina Powder—Effects of Power Law Creep and Friction

Effect of Architecture on the Strength of Braided Tubes Under Biaxial Tension and Compression

Carbide Coarsening During Creep in 12 Percent CrMoV Steel

Thermodynamic Law of Corresponding Shock States in Flexible Polymeric Foams

A Study of the Dynamic Behavior of Elastomeric Materials Using Finite Elements

A Unified Approach to Physically Based Weakest-Link Theories for Multiaxial Fracture of Ceramics

An Experimental Study Evaluating Macroscopic Cavity Interactions as a Model of Microvoid Ductility

Architecture of Functionally Graded Ceramic Coatings Against Surface Thermal Fracture

Life Prediction of Notched Specimens Using Multiaxial Surface and Subsurface Strain Analyses

Design Curve to Characterize Fatigue Strength

Correlation of Tensile and Bending Strength of Composites With a Circular Hole

A Probabilistic Micromechanics Model for Damaged Composites

Analysis and Testing of Dynamic Micromechanical Behavior of Composite Materials at Elevated Temperatures

Nonlinear Elastic Behavior of Unidirectional Composites With Fiber Waviness Under Compressive Loading

A Study on the Distribution of Residual Stress Due to Surface Induction Hardening

Measuring Method for Residual Stresses in Explosively Clad Plates and a Method of Residual Stress Reduction

Determination of Biaxial Residual Stresses by a Holographic-Hole Drilling Technique

Role of Welding Parameters in Determining the Geometrical Appearance of Weld Pool

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only