Skip Nav Destination
Issues
April 2002
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Technical Papers
On the Optimal Damping of a Vibrating Shape Memory Alloy Rod
J. Eng. Mater. Technol. April 2002, 124(2): 97–102.
doi: https://doi.org/10.1115/1.1310306
Topics:
Damping
,
Heat conduction
,
Shape memory alloys
,
Stress
,
Temperature
,
Vibration
,
Phase transitions
,
Waves
,
Integral equations
,
Constitutive equations
Application of a Unified Viscoplastic Model With Mixed Hardening to Ionic Solids and Metallic Alloys
J. Eng. Mater. Technol. April 2002, 124(2): 103–111.
doi: https://doi.org/10.1115/1.1446865
Topics:
Alloys
,
Creep
,
Flow (Dynamics)
,
Hardening
,
Relaxation (Physics)
,
Steel
,
Stress
,
Temperature
,
Constitutive equations
,
Dislocations
Mechanical Behavior of a Cu-Al-Be Shape Memory Alloy Under Multiaxial Proportional and Nonproportional Loadings
J. Eng. Mater. Technol. April 2002, 124(2): 112–124.
doi: https://doi.org/10.1115/1.1448324
Topics:
Compression
,
Mechanical behavior
,
Pressure
,
Shape memory alloys
,
Shapes
,
Stress
,
Tension
,
Testing equipment
,
Stress-strain curves
,
Temperature
Anisotropic Yield Locus Evolution During Cold Pilgering of Titanium Alloy Tubing
J. Eng. Mater. Technol. April 2002, 124(2): 125–134.
doi: https://doi.org/10.1115/1.1446472
Topics:
Anisotropy
,
Deformation
,
Finite element analysis
,
Stress
,
Texture (Materials)
,
Titanium alloys
,
Tubing
,
Yield strength
,
Testing
,
Thermal stresses
Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shotless Peening
J. Eng. Mater. Technol. April 2002, 124(2): 135–139.
doi: https://doi.org/10.1115/1.1447926
Topics:
Aluminum alloys
,
Cavitation
,
Fatigue strength
,
Fatigue testing
,
Shot peening
,
Stress
,
Strips
Three-Dimensional Finite Element Analysis of the Cold Expansion of Fastener Holes in Two Aluminum Alloys
J. Eng. Mater. Technol. April 2002, 124(2): 140–145.
doi: https://doi.org/10.1115/1.1448922
Topics:
Aluminum alloys
,
Finite element analysis
,
Residual stresses
,
Stress
,
Hardening
,
Finishes
,
Work hardening
Some Plastic Deformation Modes for Indentation of Half Space by a Rigid Body With Serrated Surface as a Model of Roughness Transfer in Metal Forming
J. Eng. Mater. Technol. April 2002, 124(2): 146–151.
doi: https://doi.org/10.1115/1.1446864
Topics:
Deformation
,
Surface roughness
,
Metalworking
In Situ Matrix Shear Response Using Torsional Test Data of Fiber Reinforced Unidirectional Polymer Composites
J. Eng. Mater. Technol. April 2002, 124(2): 152–159.
doi: https://doi.org/10.1115/1.1446471
Topics:
Carbon
,
Composite materials
,
Fibers
,
Glass
,
Shear (Mechanics)
,
Shear modulus
,
Cylinders
,
Polymer composites
,
Stress-strain curves
,
Torsion
Surface Texture, Fatigue, and the Reduction in Stiffness of Fiber Reinforced Plastics
J. Eng. Mater. Technol. April 2002, 124(2): 160–166.
doi: https://doi.org/10.1115/1.1416479
Topics:
Fatigue
,
Laminates
,
Stiffness
,
Surface roughness
,
Surface texture
,
Fiber reinforced plastics
,
Stress
,
Stress concentration
Effect of Strain Gradients and Heterogeneity on Flow Strength of Particle Reinforced Metal-Matrix Composites
J. Eng. Mater. Technol. April 2002, 124(2): 167–173.
doi: https://doi.org/10.1115/1.1417487
Topics:
Deformation
,
Dislocations
,
Flow (Dynamics)
,
Metal matrix composites
,
Particle size
,
Particulate matter
,
Strain gradient
,
Stress
,
Plasticity
Analysis of High Volume Fraction Irregular Particulate Damping Composites
J. Eng. Mater. Technol. April 2002, 124(2): 174–178.
doi: https://doi.org/10.1115/1.1448923
Topics:
Asphalt
,
Composite materials
,
Damping
,
Finite element analysis
,
Particulate matter
,
Stiffness
,
Viscoelasticity
,
Shapes
,
Shear modulus
Relationship Between Rockwell C Hardness and Inelastic Material Constants
J. Eng. Mater. Technol. April 2002, 124(2): 179–184.
doi: https://doi.org/10.1115/1.1446863
Topics:
Deformation
,
Displacement
,
Finite element analysis
,
Friction
,
Testing
,
Work hardening
,
Yield stress
,
Young's modulus
,
Finite element model
Residual Stress Measurement in a Ceramic-Metallic Graded Material
J. Eng. Mater. Technol. April 2002, 124(2): 185–191.
doi: https://doi.org/10.1115/1.1446073
Topics:
Error analysis
,
Stress
,
Functionally graded materials
Development of an Analytical Model for Drilling Burr Formation in Ductile Materials
J. Eng. Mater. Technol. April 2002, 124(2): 192–198.
doi: https://doi.org/10.1115/1.1429937
Topics:
Cutting
,
Deformation
,
Drilling
,
Drills (Tools)
,
Thrust
,
Fracture (Materials)
,
Fracture (Process)
Creep Rupture Due to Material Damage by Cavitation
J. Eng. Mater. Technol. April 2002, 124(2): 199–205.
doi: https://doi.org/10.1115/1.1446076
Damage Zone Around Tip of an Interface Crack Between Rubber-Modified Epoxy Resin and Aluminum
J. Eng. Mater. Technol. April 2002, 124(2): 206–214.
doi: https://doi.org/10.1115/1.1417980
Topics:
Aluminum
,
Epoxy resins
,
Fracture (Materials)
,
Rubber
,
Stress
,
Damage
,
Particulate matter
A Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds
J. Eng. Mater. Technol. April 2002, 124(2): 215–221.
doi: https://doi.org/10.1115/1.1429639
Topics:
Aluminum
,
Friction
,
Neutron diffraction
,
Residual stresses
,
Stress
,
Welded joints
,
Stress concentration
,
Welding
,
Grain size
Effects of Shot-Peening on Fretting-Fatigue Behavior of Ti-6Al-4V
J. Eng. Mater. Technol. April 2002, 124(2): 222–228.
doi: https://doi.org/10.1115/1.1448323
Topics:
Fatigue
,
Finite element analysis
,
Shot peening
,
Stress
,
Fracture (Materials)
,
Fatigue life
,
Tension
Evaluation of Multiaxial Fatigue Life Prediction Methodologies for Ti-6Al-4V
J. Eng. Mater. Technol. April 2002, 124(2): 229–237.
doi: https://doi.org/10.1115/1.1446075
Topics:
Fatigue
,
Stress
,
Damage
,
Fatigue life
Micro and Macro Deformation of Single Crystal NiTi
J. Eng. Mater. Technol. April 2002, 124(2): 238–245.
doi: https://doi.org/10.1115/1.1416684
Topics:
Compression
,
Crystals
,
Deformation
,
Dislocation motion
,
Martensitic transformations
,
Nickel titanium alloys
,
Stress
,
Temperature
On the Elastic Properties of PVD Coatings in Relation to Their Microstructure
J. Eng. Mater. Technol. April 2002, 124(2): 246–249.
doi: https://doi.org/10.1115/1.1446074
Topics:
Coatings
,
Elasticity
,
Stiffness
,
Stress
,
Compressive stress
On the Improvement of Calibration Coefficients for Hole-Drilling Integral Method: Part I—Analysis of Calibration Coefficients Obtained by a 3-D FEM Model
J. Eng. Mater. Technol. April 2002, 124(2): 250–258.
doi: https://doi.org/10.1115/1.1416685
Topics:
Calibration
,
Drilling
,
Stress
,
Three-dimensional models
,
Finite element methods
Prediction of Forming Limit Diagram Based on Damage Coupled Kinematic-Isotropic Hardening Model Under Nonproportional Loading
J. Eng. Mater. Technol. April 2002, 124(2): 259–265.
doi: https://doi.org/10.1115/1.1431908
Topics:
Damage
,
Forming limit diagrams
,
Hardening
,
Kinematics
,
Necking
,
Anisotropy
Numerical Simulation of the Mechanically Coupled Cook-Off Experiment
J. Eng. Mater. Technol. April 2002, 124(2): 266–273.
doi: https://doi.org/10.1115/1.1429936
A Technique for Deducing In-Plane Modulus and Coefficient of Thermal Expansion of a Supported Thin Film
J. Eng. Mater. Technol. April 2002, 124(2): 274–277.
doi: https://doi.org/10.1115/1.1448522
Topics:
Elastic moduli
,
Temperature
,
Thermal expansion
,
Thermal stresses
,
Thin films
Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel
J. Eng. Mater. Technol. April 2002, 124(2): 278–285.
doi: https://doi.org/10.1115/1.1448523
Topics:
Design
,
Optimization
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)