Volume 131 Issue 1 | J. Eng. Mater. Technol.

Skip Nav Destination

Editorial

László S. Tóth

J. Eng. Mater. Technol. January 2009, 131(1): 010201. doi: https://doi.org/10.1115/1.3030689

Extract

View articletitled, Editorial

Open the PDF for in another window

Topics: Shear (Mechanics) , Shear deformation , Deformation , Modeling , Metalworking , Testing

Research Papers

Minimization of Friction Influence on the Evaluation of Rheological Parameters From Compression Test: Application to a Forging Steel Behavior Identification

S. Diot, D. Guines, A. Gavrus, E. Ragneau

J. Eng. Mater. Technol. January 2009, 131(1): 011001. doi: https://doi.org/10.1115/1.3026543

Abstract

View articletitled, Minimization of Friction Influence on the Evaluation of Rheological Parameters From Compression Test: Application to a Forging Steel Behavior Identification

Open the PDF for in another window

Topics: Compression , Friction , Rheology , Steel , Stress , Temperature , Forging , Optimization , Displacement , Constitutive equations

Inelastic Contact Behavior of Crystalline Asperities in rf MEMS Devices

O. Rezvanian, M. A. Zikry

J. Eng. Mater. Technol. January 2009, 131(1): 011002. doi: https://doi.org/10.1115/1.3026545

Abstract

View articletitled, Inelastic Contact Behavior of Crystalline Asperities in rf MEMS Devices

Open the PDF for in another window

Topics: Crystals , Cycles , Deformation , Density , Dislocations , Finite element analysis , Microelectromechanical systems , Plasticity , Stress , Surface roughness

Influence of Strain Localization on Parameter Identification

Marcel Springmann, Arnold Kühhorn, Meinhard Kuna, Matthias Scherzer

J. Eng. Mater. Technol. January 2009, 131(1): 011003. doi: https://doi.org/10.1115/1.3026546

Abstract

View articletitled, Influence of Strain Localization on Parameter Identification

Open the PDF for in another window

Topics: Acoustics , Boundary-value problems , Damage , Deformation , Displacement , Optimization , Stress , Tensors , Finite element analysis , Differential equations

Characterization of Structural Embrittlement of Creep Crack Growth for W-Added 12%Cr Ferritic Heat-Resistant Steel Related to the Multiaxial Stress

Ryuji Sugiura, A. Toshimitsu Yokobori, Jr., Masaaki Tabuchi, Akio Fuji, Takeshi Adachi

J. Eng. Mater. Technol. January 2009, 131(1): 011004. doi: https://doi.org/10.1115/1.3026544

Abstract

View articletitled, Characterization of Structural Embrittlement of Creep Crack Growth for W-Added 12%Cr Ferritic Heat-Resistant Steel Related to the Multiaxial Stress

Open the PDF for in another window

Topics: Creep , Fracture (Materials) , Stress , Steel

Obtaining a Relationship Between Process Parameters and Fracture Characteristics for Hybrid $C O_{2}$ Laser∕Waterjet Machining of Ceramics

Dinesh Kalyanasundaram, Pranav Shrotriya, Pal Molian

J. Eng. Mater. Technol. January 2009, 131(1): 011005. doi: https://doi.org/10.1115/1.3026547

Abstract

View articletitled, Obtaining a Relationship Between Process Parameters and Fracture Characteristics for Hybrid <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi mathvariant="normal">C</mi><msub><mi mathvariant="normal">O</mi><mn>2</mn></msub></mrow></math></span> Laser∕Waterjet Machining of Ceramics

Open the PDF for in another window

Topics: Cutting , Fracture (Materials) , Fracture (Process) , Machining , Temperature , Stress , Lasers , Thermal stresses , Ceramics

Measures of Bulk and Grain Strain in Deformation Processes

Craig S. Hartley, Jonathan E. Spowart

J. Eng. Mater. Technol. January 2009, 131(1): 011006. doi: https://doi.org/10.1115/1.3026548

Abstract

View articletitled, Measures of Bulk and Grain Strain in Deformation Processes

Open the PDF for in another window

Topics: Deformation , Grain boundaries , Tensors , Anisotropy

A Practical Method for Fatigue Crack Initiation Detection Using an Ion-Sputtered Film

Gang Deng, Yoshihiko Sakanashi, Tsutomu Nakanishi

J. Eng. Mater. Technol. January 2009, 131(1): 011007. doi: https://doi.org/10.1115/1.3026549

Abstract

View articletitled, A Practical Method for Fatigue Crack Initiation Detection Using an Ion-Sputtered Film

Open the PDF for in another window

Topics: Electrical resistance , Fatigue cracks , Fracture (Materials) , Steel , Fatigue testing , Shapes

Some Analytical Solutions of the Kamal Equation for Isothermal Curing With Applications to Composite Patch Repair

G. J. Tsamasphyros, Th. K. Papathanassiou, S. I. Markolefas

J. Eng. Mater. Technol. January 2009, 131(1): 011008. doi: https://doi.org/10.1115/1.3026550

Abstract

View articletitled, Some Analytical Solutions of the Kamal Equation for Isothermal Curing With Applications to Composite Patch Repair

Open the PDF for in another window

Topics: Composite materials , Differential equations , Hardening (Curing) , Maintenance , Polymers , Adhesives , Bonding

A Unified Phenomenological Model for Tensile and Compressive Response of Polymeric Foams

Timothy R. Walter, Andrew W. Richards, Ghatu Subhash

J. Eng. Mater. Technol. January 2009, 131(1): 011009. doi: https://doi.org/10.1115/1.3026556

Abstract

View articletitled, A Unified Phenomenological Model for Tensile and Compressive Response of Polymeric Foams

Open the PDF for in another window

Topics: Compression , Density , Elastic moduli , Plastic foam , Polymer foams , Stress , Tension , Collapse , Tensile strength

Stabilization of a Zirconia System and Evaluation of Its Electrolyte Characteristics for a Fuel Cell: Based on Electrical and Mechanical Considerations

Akihiko Yamaji, Takao Koshikawa, Wakako Araki, Tadaharu Adachi

J. Eng. Mater. Technol. January 2009, 131(1): 011010. doi: https://doi.org/10.1115/1.3026557

Abstract

View articletitled, Stabilization of a Zirconia System and Evaluation of Its Electrolyte Characteristics for a Fuel Cell: Based on Electrical and Mechanical Considerations

Open the PDF for in another window

Topics: Bending strength , Crystal structure , Crystals , Electrical conductivity , Electrolytes , Ionic conductivity , Solid oxide fuel cells , Temperature , Zirconium , Oxygen

Measurement and Assessment of Fatigue Life of Spot-Weld Joints

Ahmet H. Ertas, Oktem Vardar, Fazil O. Sonmez, Zafer Solim

J. Eng. Mater. Technol. January 2009, 131(1): 011011. doi: https://doi.org/10.1115/1.3030941

Abstract

View articletitled, Measurement and Assessment of Fatigue Life of Spot-Weld Joints

Open the PDF for in another window

Topics: Fatigue , Fatigue life , Stress , Welded joints , Fracture (Materials) , Welding

Modeling Effects of Compliant Coatings on HCF Resistance of Primary Inclusions in High Strength Steels

Rajesh Prasannavenkatesan, David L. McDowell, Gregory B. Olson, Herng-Jeng Jou

J. Eng. Mater. Technol. January 2009, 131(1): 011012. doi: https://doi.org/10.1115/1.3030943

Abstract

View articletitled, Modeling Effects of Compliant Coatings on HCF Resistance of Primary Inclusions in High Strength Steels

Open the PDF for in another window

Topics: Coatings , Fatigue , Fatigue cracks , Fracture (Materials) , High cycle fatigue , Martensitic steel , Nucleation (Physics) , Hardening , High strength steel , Stiffness

Shear Behavior and Related Mechanisms in Materials Plasticity

Microstructure Development During High Strain Torsion of NiAl

Burghardt Klöden, Carl-Georg Oertel, Werner Skrotzki, Erik Rybacki

J. Eng. Mater. Technol. January 2009, 131(1): 011101. doi: https://doi.org/10.1115/1.3030882

Abstract

View articletitled, Microstructure Development During High Strain Torsion of NiAl

Open the PDF for in another window

Topics: Deformation , Grain boundaries , Grain size , Recrystallization , Shear (Mechanics) , Steady state , Temperature , Torsion , Shear stress

Texture Formation and Swift Effect in High Strain Torsion of NiAl

Burghardt Klöden, Carl-Georg Oertel, Werner Skrotzki, Erik Rybacki

J. Eng. Mater. Technol. January 2009, 131(1): 011102. doi: https://doi.org/10.1115/1.3030896

Abstract

View articletitled, Texture Formation and Swift Effect in High Strain Torsion of NiAl

Open the PDF for in another window

Topics: Shear (Mechanics) , Texture (Materials) , Torsion , Simulation

Analysis of Large Strain Hot Torsion Textures Associated With “Continuous” Dynamic Recrystallization

S. M. Lim, C. Desrayaud, F. Montheillet

J. Eng. Mater. Technol. January 2009, 131(1): 011103. doi: https://doi.org/10.1115/1.3030939

Abstract

View articletitled, Analysis of Large Strain Hot Torsion Textures Associated With “Continuous” Dynamic Recrystallization

Open the PDF for in another window

Topics: Fibers , Recrystallization , Shear (Mechanics) , Texture (Materials) , Torsion , Rotation , Metals , Grain boundaries , Dislocation density , Work hardening

Shear on the Flow Surface of Metallic Crystals

Michel G. Darrieulat, Asdin Aoufi

J. Eng. Mater. Technol. January 2009, 131(1): 011104. doi: https://doi.org/10.1115/1.2969258

Abstract

View articletitled, Shear on the Flow Surface of Metallic Crystals

Open the PDF for in another window

Topics: Deformation , Flow (Dynamics) , Shear (Mechanics)

Numerical Study of Impact Penetration Shearing Employing Finite Strain Viscoplasticity Model Incorporating Adiabatic Shear Banding

Patrice Longère, André Dragon, Xavier Deprince

J. Eng. Mater. Technol. January 2009, 131(1): 011105. doi: https://doi.org/10.1115/1.3030880

Abstract

View articletitled, Numerical Study of Impact Penetration Shearing Employing Finite Strain Viscoplasticity Model Incorporating Adiabatic Shear Banding

Open the PDF for in another window

Topics: Anisotropy , Deformation , Die cutting , Failure , Modeling , Shear (Mechanics) , Shearing (Deformation) , Viscoplasticity , Plasticity , Shock (Mechanics)

Identification of Simple Shear in Plane Strain Deformation

G. Damamme, A. Colin, C. Desrayaud, F. Montheillet

J. Eng. Mater. Technol. January 2009, 131(1): 011106. doi: https://doi.org/10.1115/1.3030940

Abstract

View articletitled, Identification of Simple Shear in Plane Strain Deformation

Open the PDF for in another window

Topics: Plane strain , Shear (Mechanics) , Tensors , Deformation , Forging

Plastic Behavior of Metals at Large Strains: Experimental Studies Involving Simple Shear

E. F. Rauch

J. Eng. Mater. Technol. January 2009, 131(1): 011107. doi: https://doi.org/10.1115/1.3030942

Abstract

View articletitled, Plastic Behavior of Metals at Large Strains: Experimental Studies Involving Simple Shear

Open the PDF for in another window

Topics: Shear (Mechanics) , Extruding , Crystals , Deformation , Metals , Grain size

Texture and Mechanical Behavior of Magnesium During Free-End Torsion

Benoît Beausir, László S. Tóth, Fathallah Qods, Kenneth W. Neale

J. Eng. Mater. Technol. January 2009, 131(1): 011108. doi: https://doi.org/10.1115/1.3030973

Abstract

View articletitled, Texture and Mechanical Behavior of Magnesium During Free-End Torsion

Open the PDF for in another window

Topics: Magnesium (Metal) , Texture (Materials) , Torsion , Shear (Mechanics)

Determination of Critical Strains in Isotactic Polypropylene by Cyclic Loading-Unloading

Florian C. Spieckermann, Harald R. Wilhem, Erhard Schafler, Elias C. Alfantis, Michael J. Zehetbauer

J. Eng. Mater. Technol. January 2009, 131(1): 011109. doi: https://doi.org/10.1115/1.3030938

Abstract

View articletitled, Determination of Critical Strains in Isotactic Polypropylene by Cyclic Loading-Unloading

Open the PDF for in another window

Topics: Compression , Cycles , Deformation , Polymers , Temperature , Work hardening , Young's modulus , Hardening , Stress-strain curves

Editorial

Editorial

Research Papers

Minimization of Friction Influence on the Evaluation of Rheological Parameters From Compression Test: Application to a Forging Steel Behavior Identification

Inelastic Contact Behavior of Crystalline Asperities in rf MEMS Devices

Influence of Strain Localization on Parameter Identification

Characterization of Structural Embrittlement of Creep Crack Growth for W-Added 12%Cr Ferritic Heat-Resistant Steel Related to the Multiaxial Stress

Obtaining a Relationship Between Process Parameters and Fracture Characteristics for Hybrid $C O_{2}$ Laser∕Waterjet Machining of Ceramics

Measures of Bulk and Grain Strain in Deformation Processes

A Practical Method for Fatigue Crack Initiation Detection Using an Ion-Sputtered Film

Some Analytical Solutions of the Kamal Equation for Isothermal Curing With Applications to Composite Patch Repair

A Unified Phenomenological Model for Tensile and Compressive Response of Polymeric Foams

Stabilization of a Zirconia System and Evaluation of Its Electrolyte Characteristics for a Fuel Cell: Based on Electrical and Mechanical Considerations

Measurement and Assessment of Fatigue Life of Spot-Weld Joints

Modeling Effects of Compliant Coatings on HCF Resistance of Primary Inclusions in High Strength Steels

Shear Behavior and Related Mechanisms in Materials Plasticity

Microstructure Development During High Strain Torsion of NiAl

Texture Formation and Swift Effect in High Strain Torsion of NiAl

Analysis of Large Strain Hot Torsion Textures Associated With “Continuous” Dynamic Recrystallization

Shear on the Flow Surface of Metallic Crystals

Numerical Study of Impact Penetration Shearing Employing Finite Strain Viscoplasticity Model Incorporating Adiabatic Shear Banding

Identification of Simple Shear in Plane Strain Deformation

Plastic Behavior of Metals at Large Strains: Experimental Studies Involving Simple Shear

Texture and Mechanical Behavior of Magnesium During Free-End Torsion

Determination of Critical Strains in Isotactic Polypropylene by Cyclic Loading-Unloading

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Editorial

Research Papers

Shear Behavior and Related Mechanisms in Materials Plasticity

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only