Volume 133 Issue 2 | J. Eng. Mater. Technol.

Skip Nav Destination

Volume 133, Issue 2

April 2011

ISSN 0094-4289

EISSN 1528-8889

Research Papers

Use of a Continuum Damage Model Based on Energy Equivalence to Predict the Response of a Single-Crystal Superalloy

P. Grammenoudis, D. Reckwerth, Ch. Tsakmakis

J. Eng. Mater. Technol. April 2011, 133(2): 021001. doi: https://doi.org/10.1115/1.4000666

Abstract

View articletitled, Use of a Continuum Damage Model Based on Energy Equivalence to Predict the Response of a Single-Crystal Superalloy

Open the PDF for in another window

Topics: Crystals , Damage , Hardening , Superalloys , Viscoplasticity , Stress , Plates (structures) , Deformation , Geometry , Constitutive equations

Influence of Dissipated Energy on Shear Band Spacing in HY-100 Steel

O. Oussouaddi, L. Daridon, S. Ahzi, A. Chrysochoos

J. Eng. Mater. Technol. April 2011, 133(2): 021002. doi: https://doi.org/10.1115/1.4001592

Abstract

View articletitled, Influence of Dissipated Energy on Shear Band Spacing in HY-100 Steel

Open the PDF for in another window

Topics: Shear (Mechanics) , Steel , Work hardening

Finite Element Analysis of Welding Processes by Way of Hypoelasticity-Based Formulation

You Sung Han, Kyehyung Lee, Myoung-Soo Han, Hyunchil Chang, Kanghyouk Choi, Seyoung Im

J. Eng. Mater. Technol. April 2011, 133(2): 021003. doi: https://doi.org/10.1115/1.4003099

Abstract

View articletitled, Finite Element Analysis of Welding Processes by Way of Hypoelasticity-Based Formulation

Open the PDF for in another window

Topics: Phase transitions , Plasticity , Stress , Welding , Temperature , Finite element analysis , Cooling , Deformation

Study on Machinabilty of ${Al}_{2} O_{3}$ Ceramic Composite in EDM Using Response Surface Methodology

K. M. Patel, Pulak M. Pandey, P. Venkateswara Rao

J. Eng. Mater. Technol. April 2011, 133(2): 021004. doi: https://doi.org/10.1115/1.4003100

Abstract

View articletitled, Study on Machinabilty of <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msub><mrow><mtext>Al</mtext></mrow><mn>2</mn></msub><msub><mtext>O</mtext><mn>3</mn></msub></mrow></math></span> Ceramic Composite in EDM Using Response Surface Methodology

Open the PDF for in another window

Topics: Ceramic composites , Cycles , Electrical discharge machining , Surface roughness , Response surface methodology , Machining , Ceramics , Wear

Effect of Cyclic Strain on the Mechanical Behavior of a Thermoplastic Polyurethane

A. Avanzini, D. Gallina

J. Eng. Mater. Technol. April 2011, 133(2): 021005. doi: https://doi.org/10.1115/1.4003101

Abstract

View articletitled, Effect of Cyclic Strain on the Mechanical Behavior of a Thermoplastic Polyurethane

Open the PDF for in another window

Topics: Stress , Temperature , Urethane elastomers , Thermal analysis , Polymers

Microstructure and Properties of the Composites: Hydroxyapatite With Addition of Zirconia Phase

Agata Dudek

J. Eng. Mater. Technol. April 2011, 133(2): 021006. doi: https://doi.org/10.1115/1.4003104

Abstract

View articletitled, Microstructure and Properties of the Composites: Hydroxyapatite With Addition of Zirconia Phase

Open the PDF for in another window

Topics: Composite materials , Porosity , Sinter (Metallurgy) , Ceramics , Sintering , Bone

Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD

Yong Huang, Mason Morehead

J. Eng. Mater. Technol. April 2011, 133(2): 021007. doi: https://doi.org/10.1115/1.4003105

Abstract

View articletitled, Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD

Open the PDF for in another window

Topics: Copper , Dislocation density , Grain size , Machining , Dislocations

Modeling of Strain-Stress Relationship for Carbon Steel Deformed at Temperature Exceeding Hot Rolling Range

Marcin Hojny, Miroslaw Glowacki

J. Eng. Mater. Technol. April 2011, 133(2): 021008. doi: https://doi.org/10.1115/1.4003106

Abstract

View articletitled, Modeling of Strain-Stress Relationship for Carbon Steel Deformed at Temperature Exceeding Hot Rolling Range

Open the PDF for in another window

Topics: Deformation , Hot rolling , Steel , Stress , Temperature , Testing , Modeling , Compression , Yield stress , Carbon steel

Processing of Small Scale Nitinol Billets by Induction Heated Nonconventional Isothermal Extrusion (IHNCIE)

J. Butler, P. Tiernan, A. A. Gandhi, S. Beloshapkin, S. A. M. Tofail

J. Eng. Mater. Technol. April 2011, 133(2): 021009. doi: https://doi.org/10.1115/1.4003108

Abstract

View articletitled, Processing of Small Scale Nitinol Billets by Induction Heated Nonconventional Isothermal Extrusion (IHNCIE)

Open the PDF for in another window

Topics: Extruding , Nickel titanium alloys , Wire , Temperature , Electromagnetic induction

Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations

Tasnim Hassan, Ozgen U. Çolak, Patricia M. Clayton

J. Eng. Mater. Technol. April 2011, 133(2): 021010. doi: https://doi.org/10.1115/1.4003109

Abstract

View articletitled, Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations

Open the PDF for in another window

Topics: Simulation , Stress , Molecular weight , Viscoplasticity , Cycles , Polymers

The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments

Peter Mayr, Stefan Mitsche, Horst Cerjak, Samuel M. Allen

J. Eng. Mater. Technol. April 2011, 133(2): 021011. doi: https://doi.org/10.1115/1.4003112

Abstract

View articletitled, The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments

Open the PDF for in another window

Topics: Creep , Failure , Metals , Welded joints , Testing , Stress , Steel , Heat , Fracture (Process)

Ambient Temperature Creep of Type 304 Stainless Steel

M. E. Kassner, P. Geantil, R. S. Rosen

J. Eng. Mater. Technol. April 2011, 133(2): 021012. doi: https://doi.org/10.1115/1.4003110

Abstract

View articletitled, Ambient Temperature Creep of Type 304 Stainless Steel

Open the PDF for in another window

Topics: Creep , Stainless steel , Temperature , Yield stress , Plasticity , Work hardening , Stress

Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model

Calvin M. Stewart, Ali P. Gordon, Erik A. Hogan, Ashok Saxena

J. Eng. Mater. Technol. April 2011, 133(2): 021013. doi: https://doi.org/10.1115/1.4003111

Abstract

View articletitled, Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model

Open the PDF for in another window

Topics: Creep , Damage , Rupture , Temperature , Stress , Optimization

Effect of Material Physical Properties on Residual Stress Measurement by EDM Hole-Drilling Method

H. T. Lee, T. Y. Tai, C. Liu, F. C. Hsu, J. M. Hsu

J. Eng. Mater. Technol. April 2011, 133(2): 021014. doi: https://doi.org/10.1115/1.4000219

Abstract

View articletitled, Effect of Material Physical Properties on Residual Stress Measurement by EDM Hole-Drilling Method

Open the PDF for in another window

Topics: Calibration , Drilling , Electrical discharge machining , Machining , Strain gages , Stress , Thermal conductivity , Carbon

Tensile and Fracture Characterization of PETI-5 and IM7/PETI-5 Graphite/Epoxy Composites Under Quasi-Static and Dynamic Loading Conditions

Dongyeon Lee, Hareesh V. Tippur, Brian J. Jensen, Philip B. Bogert

J. Eng. Mater. Technol. April 2011, 133(2): 021015. doi: https://doi.org/10.1115/1.4003487

Abstract

View articletitled, Tensile and Fracture Characterization of PETI-5 and IM7/PETI-5 Graphite/Epoxy Composites Under Quasi-Static and Dynamic Loading Conditions

Open the PDF for in another window

Topics: Composite materials , Fracture (Materials) , Fracture (Process) , Stress , Graphite , Epoxy resins

Fatigue Behavior and Damage Assessment of Stainless Steel/Aluminum Composites

Volkan Eskizeybek, Ahmet Avci, Ahmet Akdemir, Ömer Sinan Şahin

J. Eng. Mater. Technol. April 2011, 133(2): 021016. doi: https://doi.org/10.1115/1.4003490

Abstract

View articletitled, Fatigue Behavior and Damage Assessment of Stainless Steel/Aluminum Composites

Open the PDF for in another window

Topics: Aluminum , Composite materials , Diffusion bonding (Metals) , Fatigue , Fatigue cracks , Fatigue testing , Fibers , Fracture (Materials) , Stainless steel , Stress

Model for the Effect of Fiber Bridging on the Fracture Resistance of Reinforced-Carbon-Carbon

K. S. Chan, Y.-D. Lee, S. J. Hudak, Jr.

J. Eng. Mater. Technol. April 2011, 133(2): 021017. doi: https://doi.org/10.1115/1.4003344

Abstract

View articletitled, Model for the Effect of Fiber Bridging on the Fracture Resistance of Reinforced-Carbon-Carbon

Open the PDF for in another window

Topics: Fibers , Fracture (Materials) , Stress , Fracture toughness , Displacement , Fracture (Process)

Improvement of the Fatigue Behavior of Stainless Steel Substrates by Low Pressure Fluidized Bed Peening (FBP)

M. Barletta

J. Eng. Mater. Technol. April 2011, 133(2): 021018. doi: https://doi.org/10.1115/1.4003486

Abstract

View articletitled, Improvement of the Fatigue Behavior of Stainless Steel Substrates by Low Pressure Fluidized Bed Peening (FBP)

Open the PDF for in another window

Topics: Fatigue , Fatigue life , Fluidized beds , Shot peening , Stainless steel , Stress , Pressure

Mechanical Behavior of a Rephosphorized Steel for Car Body Applications: Effects of Temperature, Strain Rate, and Pretreatment

Yu Cao, Johan Ahlström, Birger Karlsson

J. Eng. Mater. Technol. April 2011, 133(2): 021019. doi: https://doi.org/10.1115/1.4003491

Abstract

View articletitled, Mechanical Behavior of a Rephosphorized Steel for Car Body Applications: Effects of Temperature, Strain Rate, and Pretreatment

Open the PDF for in another window

Topics: Deformation , Steel , Stress , Temperature , Elongation , Mechanical behavior , Work hardening , Flow (Dynamics) , Temperature effects

Hole-Within-a-Hole Method for Determining Residual Stresses

A. Makino, D. V. Nelson, M. R. Hill

J. Eng. Mater. Technol. April 2011, 133(2): 021020. doi: https://doi.org/10.1115/1.4003496

Abstract

View articletitled, Hole-Within-a-Hole Method for Determining Residual Stresses

Open the PDF for in another window

Topics: Drilling , Stress , Residual stresses , Finite element analysis

A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers

Leslee W. Brown, Lorenzo M. Smith

J. Eng. Mater. Technol. April 2011, 133(2): 021021. doi: https://doi.org/10.1115/1.4003517

Abstract

View articletitled, A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers

Open the PDF for in another window

Topics: Compression , Deformation , Elastomers , Fibers , Finite element analysis , Shear (Mechanics) , Stress , Tension , Anisotropy

Fatigue Life Prediction of Different Fiber-Reinforced Composites Using Polynomial Classifiers

H. El Kadi, I. M. Deiab, M. Al-Assadi

J. Eng. Mater. Technol. April 2011, 133(2): 021022. doi: https://doi.org/10.1115/1.4003566

Abstract

View articletitled, Fatigue Life Prediction of Different Fiber-Reinforced Composites Using Polynomial Classifiers

Open the PDF for in another window

Topics: Fatigue , Fatigue life , Polynomials , Fiber reinforced composites

Extrapolation Techniques for Very Low Cycle Fatigue Behavior of a Ni-base Superalloy

Brian R. Daubenspeck, Ali P. Gordon

J. Eng. Mater. Technol. April 2011, 133(2): 021023. doi: https://doi.org/10.1115/1.4003602

Abstract

View articletitled, Extrapolation Techniques for Very Low Cycle Fatigue Behavior of a Ni-base Superalloy

Open the PDF for in another window

Topics: Fatigue , High temperature , Low cycle fatigue , Stress , Superalloys , Temperature , Gas turbines , Tensile strength , Cycles , Alloys

Microplane Model for Fracturing Damage of Triaxially Braided Fiber-Polymer Composites

Ferhun C. Caner, Zdeněk P. Bažant, Christian G. Hoover, Anthony M. Waas, Khaled W. Shahwan

J. Eng. Mater. Technol. April 2011, 133(2): 021024. doi: https://doi.org/10.1115/1.4003102

Abstract

View articletitled, Microplane Model for Fracturing Damage of Triaxially Braided Fiber-Polymer Composites

Open the PDF for in another window

Topics: Composite materials , Damage , Fracture (Materials) , Fracture (Process) , Size effect , Stress , Fibers , Simulation , Finite element analysis , Polymers

Time and Temperature Dependent Recovery of Epoxy-Based Shape Memory Polymers

Francisco Castro, Kristofer K. Westbrook, Jason Hermiller, Dae Up Ahn, Yifu Ding, H. Jerry Qi

J. Eng. Mater. Technol. April 2011, 133(2): 021025. doi: https://doi.org/10.1115/1.4003103

Abstract

View articletitled, Time and Temperature Dependent Recovery of Epoxy-Based Shape Memory Polymers

Open the PDF for in another window

Topics: Cycles , Epoxy adhesives , Epoxy resins , Shape memory polymers , Temperature , Heating , Deformation

High Strain Rate Tensile Behavior of Aluminum Alloy 7075 T651 and IS 2062 Mild Steel

Jayaram R. Pothnis, Yernamma Perla, H. Arya, N. K. Naik

J. Eng. Mater. Technol. April 2011, 133(2): 021026. doi: https://doi.org/10.1115/1.4003113

Abstract

View articletitled, High Strain Rate Tensile Behavior of Aluminum Alloy 7075 T651 and IS 2062 Mild Steel

Open the PDF for in another window

Topics: Aluminum alloys , Steel , Yield strength , Stress , Uncertainty analysis

Technical Briefs

Characterization of Rapidly Consolidated Titanium Diboride

Kunal Kothari, Ramachandran Radhakrishnan, Norman M. Wereley

J. Eng. Mater. Technol. April 2011, 133(2): 024501. doi: https://doi.org/10.1115/1.4003599

Abstract

View articletitled, Characterization of Rapidly Consolidated Titanium Diboride

Open the PDF for in another window

Topics: Compacting , Density , Ductility , Fracture toughness , Mechanical properties , Optical microscopy , Plasmas (Ionized gases) , Pressure , Scanning electron microscopy , Sintering

Research Papers

Use of a Continuum Damage Model Based on Energy Equivalence to Predict the Response of a Single-Crystal Superalloy

Influence of Dissipated Energy on Shear Band Spacing in HY-100 Steel

Finite Element Analysis of Welding Processes by Way of Hypoelasticity-Based Formulation

Study on Machinabilty of ${Al}_{2} O_{3}$ Ceramic Composite in EDM Using Response Surface Methodology

Effect of Cyclic Strain on the Mechanical Behavior of a Thermoplastic Polyurethane

Microstructure and Properties of the Composites: Hydroxyapatite With Addition of Zirconia Phase

Study of Machining-Induced Microstructure Variations of Nanostructured/Ultrafine-Grained Copper Using XRD

Modeling of Strain-Stress Relationship for Carbon Steel Deformed at Temperature Exceeding Hot Rolling Range

Processing of Small Scale Nitinol Billets by Induction Heated Nonconventional Isothermal Extrusion (IHNCIE)

Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations

The Impact of Weld Metal Creep Strength on the Overall Creep Strength of 9% Cr Steel Weldments

Ambient Temperature Creep of Type 304 Stainless Steel

Characterization of the Creep Deformation and Rupture Behavior of DS GTD-111 Using the Kachanov–Rabotnov Constitutive Model

Effect of Material Physical Properties on Residual Stress Measurement by EDM Hole-Drilling Method

Tensile and Fracture Characterization of PETI-5 and IM7/PETI-5 Graphite/Epoxy Composites Under Quasi-Static and Dynamic Loading Conditions

Fatigue Behavior and Damage Assessment of Stainless Steel/Aluminum Composites

Model for the Effect of Fiber Bridging on the Fracture Resistance of Reinforced-Carbon-Carbon

Improvement of the Fatigue Behavior of Stainless Steel Substrates by Low Pressure Fluidized Bed Peening (FBP)

Mechanical Behavior of a Rephosphorized Steel for Car Body Applications: Effects of Temperature, Strain Rate, and Pretreatment

Hole-Within-a-Hole Method for Determining Residual Stresses

A Simple Transversely Isotropic Hyperelastic Constitutive Model Suitable for Finite Element Analysis of Fiber Reinforced Elastomers

Fatigue Life Prediction of Different Fiber-Reinforced Composites Using Polynomial Classifiers

Extrapolation Techniques for Very Low Cycle Fatigue Behavior of a Ni-base Superalloy

Microplane Model for Fracturing Damage of Triaxially Braided Fiber-Polymer Composites

Time and Temperature Dependent Recovery of Epoxy-Based Shape Memory Polymers

High Strain Rate Tensile Behavior of Aluminum Alloy 7075 T651 and IS 2062 Mild Steel

Technical Briefs

Characterization of Rapidly Consolidated Titanium Diboride

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only