We put forward a novel proposition that a mechanism can move in a constant direction and change its moving directions only by one actuator and construct a single-DOF (degree of freedom) ground mobile mechanism based on the well-known Schatz mechanism. This ground mobile Schatz mechanism has six links, one of which is designed as a spoke octahedron and an other one as a tail link. When the actuator rotates in one direction, the spoke octahedron can roll on the ground to let the ground mobile Schatz mechanism to move in a straight line pushed by the tail link. When the actuator rotates in the opposite direction, the tail link can be lifted to change its landing point and the relative position between it and the spoke octahedron, then the spoke octahedron can roll in another direction pushed by the tail link. In addition, it is also an untraditional application of the Schatz mechanism that it is used as a novel ground mobile mechanism. Locomotion analysis, gait planning and stability analysis are performed, respectively, and a prototype is developed and tested.
Skip Nav Destination
Article navigation
February 2016
Research-Article
Ground Mobile Schatz Mechanism
Chao Liu,
Chao Liu
State Key Laboratory of Mechanical System and Vibration,
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Key Laboratory of Digital Manufacture
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China;
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China;
School of Mechanical, Electronic and Control Engineering,
Beijing Jiaotong University,
Beijing 100044, China
Beijing Jiaotong University,
Beijing 100044, China
Search for other works by this author on:
Shun Yao,
Shun Yao
School of Mechanical, Electronic and Control Engineering,
Beijing Jiaotong University,
Beijing 100044, China
Beijing Jiaotong University,
Beijing 100044, China
Search for other works by this author on:
Hao Wang,
Hao Wang
State Key Laboratory of Mechanical System and Vibration,
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Key Laboratory of Digital Manufacture
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China
e-mail: wanghao@sjtu.edu.cn
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China
e-mail: wanghao@sjtu.edu.cn
Search for other works by this author on:
Yan-An Yao
Yan-An Yao
School of Mechanical, Electronic and Control Engineering,
Beijing Jiaotong University,
Beijing 100044, China
e-mail: yayao@bjtu.edu.cn
Beijing Jiaotong University,
Beijing 100044, China
e-mail: yayao@bjtu.edu.cn
Search for other works by this author on:
Chao Liu
State Key Laboratory of Mechanical System and Vibration,
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Key Laboratory of Digital Manufacture
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China;
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China;
School of Mechanical, Electronic and Control Engineering,
Beijing Jiaotong University,
Beijing 100044, China
Beijing Jiaotong University,
Beijing 100044, China
Shun Yao
School of Mechanical, Electronic and Control Engineering,
Beijing Jiaotong University,
Beijing 100044, China
Beijing Jiaotong University,
Beijing 100044, China
Hao Wang
State Key Laboratory of Mechanical System and Vibration,
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Jiao Tong University,
Shanghai 200240, China;
Shanghai Key Laboratory of Digital Manufacture
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China
e-mail: wanghao@sjtu.edu.cn
for Thin-Walled Structures,
Shanghai Jiao Tong University,
Shanghai 200240, China
e-mail: wanghao@sjtu.edu.cn
Yan-An Yao
School of Mechanical, Electronic and Control Engineering,
Beijing Jiaotong University,
Beijing 100044, China
e-mail: yayao@bjtu.edu.cn
Beijing Jiaotong University,
Beijing 100044, China
e-mail: yayao@bjtu.edu.cn
1Corresponding author.
Manuscript received December 9, 2014; final manuscript received April 26, 2015; published online August 18, 2015. Assoc. Editor: David Dooner.
J. Mechanisms Robotics. Feb 2016, 8(1): 015002 (15 pages)
Published Online: August 18, 2015
Article history
Received:
December 9, 2014
Revision Received:
April 26, 2015
Citation
Liu, C., Yao, S., Wang, H., and Yao, Y. (August 18, 2015). "Ground Mobile Schatz Mechanism." ASME. J. Mechanisms Robotics. February 2016; 8(1): 015002. https://doi.org/10.1115/1.4030503
Download citation file:
Get Email Alerts
Design and Motion Planning of a Cable Robot Utilizing Cable Slackness
J. Mechanisms Robotics
Design, Kinematics, and Deployment of a Continuum Underwater Vehicle-Manipulator System
J. Mechanisms Robotics
Related Articles
A Novel Underactuated Tetrahedral Mobile Robot
J. Mechanisms Robotics (August,2018)
A Hybrid Tracked-Wheeled Multi-Directional Mobile Robot
J. Mechanisms Robotics (August,2019)
Increasing Mobile Robot Efficiency and Versatility Through Manipulation-Driven Adaptation
J. Mechanisms Robotics (October,2021)
Genetic Planning Method and its Application to Planetary Exploration
J. Dyn. Sys., Meas., Control (December,2002)
Related Proceedings Papers
Related Chapters
Accuracy of an Axis
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Robot Education with Mobile Robots
Designs and Prototypes of Mobile Robots