Load performance of gas lubricated, compliant surface foil thrust bearings has an interlocking relationship with the compliance of the bearing and hydrodynamics of convergent wedge surface. Compliance of the bearing consists of supporting spring elements (elastic foundation) and a smooth elastic top foil. In this paper, a class of gas lubricated foil thrust bearings has been investigated analytically utilizing a novel approach which combines Finite Difference (FD) and Finite Element (FE) methods. Solution of the governing hydrodynamic equations dealing with compressible fluid is coupled with the structural resiliency of the foil bearing surfaces. FD method is utilized for hydrodynamic analysis while FE is used to model structural resiliency. Influence coefficients were generated to address the elasticity effects of combined top foil and elastic foundation on the hydrodynamics of thrust bearing, and were used to expedite the numerical solution. Within 2 to 3 iterations the convergence criterion was reached. The overall program logic proved to be an efficient technique to deal with the complex structural compliance of various foil bearing. Case study has been conducted and sample solutions are provided. Unlike prior analytical investigations, the essential effect of the top foil on the performance of the bearing has been elucidated. [S0742-4787(00)02501-7]

Issue Section:
Technical Papers
Keywords:
compliance control, lubrication, machine bearings, finite difference methods, finite element analysis, hydrodynamics, gases, foils, performance evaluation
Topics:
Bearings, Finite element analysis, Foil bearings, Stiffness, Thrust bearings, Pressure, Finite difference methods, Stress, Flow charts, Springs, Hydrodynamics
1.
Heshmat
,
H.
,
Walowit
,
J.
, and
Pinkus
,
O.
,
1983
, “
Analysis of Gas-Lubricated Compliant Thrust Bearings
,”
ASME J. Lubr. Technol.
,
105
, pp.
638
638
.
2.
105
,
646
–
655
1.
Heshmat
,
H.
, and
Shapiro
,
W.
,
1984
, “
Advanced Development of Air-Lubricated Thrust Bearings
,”
ASLE Lubri. Eng.
,
40
, No.
1
, pp.
21
–
6
.
2.
Heshmat, H., 1991, “A Feasibility Study on the Use of Foil Bearing in Cryogenic Turbopumps,” Presented at AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference, June 24–26, 1991, Sacramento, CA, Paper No. AIAA-91-2103.
3.
Heshmat, H., 1993, “Advancement In The Performance of Aerodynamic Foil Journal Bearings: High Speed and Load Capability,” ASME Paper No. 93-Trib-32, Accepted for Publication by ASME J. Tribol., New Orleans, LA.
4.
Heshmat, H., and Hermel, P., 1993, “Compliant Foil Bearing Technology and Their Application to High Speed Turbomachinery,” The 19th Leeds-Lyon Symposium on Thin Film in Tribology—From Micro Meters to Nano Meters, Leeds, U.K., Sept., 1992, D. Dowson et al. eds., Elsevier Science Publishers B. V., pp. 559–575.
5.
Heshmat, H., 1998, “High Load Capacity Compliant Foil Hydrodynamic Thrust Bearing,” US Patent #5,833,369, Nov. 10, 1998.
6.
Heshmat, H., Chen, H. M., and Walton, J. F., 1998, “On the Performance of Hybrid Foil-Magnetic Bearings,” ASME Paper No. 98-GT-376, June 2–5, 1998, 43rd ASME Gas Turbine and Aeroengine Congress, Stockholm, Sweden.
7.
Ku
,
C.-P. R.
, and
Heshmat
,
H.
,
1992
, “
Compliant Foil Bearing Structural Stiffness Analysis: Part I—Theoretical Modal Including Strip and Variable Bump Foil Geometry
,”
ASME J. Tribol.
,
114
, pp.
394
–
400
.
8.
Walton, J. F., and Heshmat, H., 1994, “Compliant Foil Bearings For Use In Cryogenic Turbopumps,” Proceedings of Advanced Earth-to-Orbit Propulsion Technology Conference, NASA/MSFC May 17–19, 1994, NASA CP3282 Vol. 1, Sept. 19, 1994, pp. 372–381.
9.
Heshmat
,
H.
, and
Ku
,
C.-P. R.
,
1994
, “
Structural Damping of Self-Acting Compliant Foil Journal Bearings
,”
ASME J. Tribol.
,
116
, pp.
76
–
82
.
10.
Heshmat, C. A., and Heshmat, H., 1994, “An Analysis of Gas Lubricated, Multi-Leaf Foil Journal Bearings With Backing Springs,” ASME Paper No. 94-Trib-61, Accepted for publication in the ASME J. Tribol., and Presented at the ASME/STLE Tribology Conference, October 16–19, 1994, Lahaina, Hawaii.
11.
Zorzi, E. S., 1976, “Gas-Lubricated Foil Bearing Development for Advanced Turbomachines,” Tech. Report AFAPL-TR-76-114, Vol. I and II, AiResearch Manufacturing Co. of Arizona, Phoenix, AZ.
12.
Castelli
,
V.
, and
Pirvics
,
J.
,
1968
, “
Review of Numerical Methods in Gas Bearing Film Analysis
,”
ASME J. Lubr. Technol.
,
90
, No.
4
4
.
13.
Structural Research and Analysis Corporation, 1998, “COSMOS/M Manual” (COSMOS/M Software for FEA).
Copyright © 2000
 by ASME
You do not currently have access to this content.