Graded materials with high surface hardness and ductile cores are popularly used in high performance bearing applications to resist surface wear and fatigue damage. The gradient in hardness with depth is commonly determined using micro-indentation on the cross section of the material which contains the gradation in microstructure or composition. In the current study, a novel method is proposed to predict the hardness gradient profile using solely surface indentations at a range of loads. The method does not require the graded material to be sectioned, and has practical utility in the surface treatment industry. Two case hardened steels, M-50 NiL and Pyrowear® 675, and a through-hardened M50 steel, are used as model materials to illustrate the concepts. For a material with a decreasing gradient in hardness, higher indent loads result in a lower measured hardness due to the influence of the softer subsurface layers. A power-law model is presented which relates the measured surface indentation hardness under increasing load to the subsurface gradient in hardness. It is shown that the response of the material is not influenced greatly by the absolute surface hardness value, but instead sensitive to the sharpness of the gradient in subsurface hardness beneath the indented region. The proposed approach is not specific to case hardened steels and can be used to determine the subsurface hardness gradient for any plastically graded material (PGM).
Skip Nav Destination
e-mail: subhash@ufl.edu
Article navigation
July 2011
Research Papers
Determination of Subsurface Hardness Gradients in Plastically Graded Materials via Surface Indentation
Michael A. Klecka,
Michael A. Klecka
Department of Mechanical and Aerospace Engineering,
University of Florida
, P.O. Box 116250, Gainesville, FL 32611-6250
Search for other works by this author on:
Ghatu Subhash,
Ghatu Subhash
Department of Mechanical and Aerospace Engineering,
e-mail: subhash@ufl.edu
University of Florida
, P.O. Box 116250, Gainesville, FL 32611-6250
Search for other works by this author on:
Nagaraj K. Arakere
Nagaraj K. Arakere
Department of Mechanical and Aerospace Engineering,
University of Florida
, P.O. Box 116250, Gainesville, FL 32611-6250
Search for other works by this author on:
Michael A. Klecka
Department of Mechanical and Aerospace Engineering,
University of Florida
, P.O. Box 116250, Gainesville, FL 32611-6250
Ghatu Subhash
Department of Mechanical and Aerospace Engineering,
University of Florida
, P.O. Box 116250, Gainesville, FL 32611-6250e-mail: subhash@ufl.edu
Nagaraj K. Arakere
Department of Mechanical and Aerospace Engineering,
University of Florida
, P.O. Box 116250, Gainesville, FL 32611-6250J. Tribol. Jul 2011, 133(3): 031403 (5 pages)
Published Online: July 7, 2011
Article history
Received:
November 21, 2010
Revised:
March 7, 2011
Online:
July 7, 2011
Published:
July 7, 2011
Citation
Klecka, M. A., Subhash, G., and Arakere, N. K. (July 7, 2011). "Determination of Subsurface Hardness Gradients in Plastically Graded Materials via Surface Indentation." ASME. J. Tribol. July 2011; 133(3): 031403. https://doi.org/10.1115/1.4003859
Download citation file:
Get Email Alerts
Related Articles
Case-Hardening With Ammonia Gas
Trans. ASME (January,1931)
Contact Yield Initiation and Its Influence on Rolling Contact Fatigue of Case-Hardened Steels
J. Tribol (December,2020)
Effects of CO 2 Laser Surface Hardening in the Unlubricated Wear of Ductile Cast Iron Against Alumina
J. Tribol (October,1996)
1.5 Per Cent Carbon Cast-Steel Railroad-Car Wheels
Trans. ASME (May,1954)
Related Proceedings Papers
Related Chapters
Development of the Cost-Efficient Steel 18MnCrMoV4-8-7 for Case-Hardening or Carbonitriding of Mid-Sized Roller Bearings
Bearing and Transmission Steels Technology
Wear and Contact Fatigue Properties of a Novel Lubricant Additive
Bearing and Transmission Steels Technology
Understanding the Problem
Design and Application of the Worm Gear