Skip to Main Content
American Society of Mechanical Engineers: Digital Collection
Cart
header search
Search
Advanced Search
Skip Nav Destination

Issues

Volume 128, Issue 3
July 2006
Issue Cover
ISSN 0742-4787
EISSN 1528-8897
In this Issue

Research Papers

Analysis of the Tribological Mechanisms Arising in the Chemical Mechanical Polishing of Copper-Film Wafers When Using a Pad With Concentric Grooves
Jen Fin Lin, Sheng-Chao Chen, Yu Long Ouyang, Ming Shih Tsai
J. Tribol. July 2006, 128(3): 445–459. doi: https://doi.org/10.1115/1.2194913
View articletitled, Analysis of the Tribological Mechanisms Arising in the Chemical Mechanical Polishing of Copper-Film Wafers When Using a Pad With Concentric Grooves
Open the PDF for in another window
Topics: Copper , Polishing , Pressure , Semiconductor wafers , Lubrication , Surface roughness , Slurries , Abrasives , Particulate matter
An Experimental Study on the Impact of Interface Temperature on Thermally Induced Wear Transitions in Dry Sliding
Daryl S. Schneider, Lyndon S. Stephens
J. Tribol. July 2006, 128(3): 460–468. doi: https://doi.org/10.1115/1.2197841
View articletitled, An Experimental Study on the Impact of Interface Temperature on Thermally Induced Wear Transitions in Dry Sliding
Open the PDF for in another window
Topics: Cooling , Temperature , Wear , Heat , Carbon fibers , Coolants , Tungsten
Characterization and Erosion Behavior of Plasma Sprayed NiCrAlY and Ni-20Cr Coatings on an Fe-based Superalloy
S. B. Mishra, K. Chandra, S. Prakash
J. Tribol. July 2006, 128(3): 469–475. doi: https://doi.org/10.1115/1.2197843
View articletitled, Characterization and Erosion Behavior of Plasma Sprayed <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>NiCrAlY</mi></mrow></math></span> and <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>Ni</mi><mtext>-</mtext><mn>20</mn><mi>Cr</mi></mrow></math></span> Coatings on an Fe-based Superalloy
Open the PDF for in another window
Topics: Coatings , Erosion , Plasmas (Ionized gases) , Superalloys , Particulate matter
A Comprehensive Method to Predict Wear and to Define the Optimum Geometry of Fretting Surfaces
L. Gallego, D. Nélias, C. Jacq
J. Tribol. July 2006, 128(3): 476–485. doi: https://doi.org/10.1115/1.2194917
View articletitled, A Comprehensive Method to Predict Wear and to Define the Optimum Geometry of Fretting Surfaces
Open the PDF for in another window
Topics: Pressure , Simulation , Wear , Geometry , Cycles , Computation , Friction
Improvement of Punch Profiles for Elastic Circular Contacts
Marilena Glovnea, Emanuel Diaconescu
J. Tribol. July 2006, 128(3): 486–492. doi: https://doi.org/10.1115/1.2197522
View articletitled, Improvement of Punch Profiles for Elastic Circular Contacts
Open the PDF for in another window
Topics: Pressure , Stress , Polynomials
Experimental Characterization of Wheel-Rail Contact Patch Evolution
M. B. Marshall, R. Lewis, R. S. Dwyer-Joyce, U. Olofsson, S. Björklund
J. Tribol. July 2006, 128(3): 493–504. doi: https://doi.org/10.1115/1.2197523
View articletitled, Experimental Characterization of Wheel-Rail Contact Patch Evolution
Open the PDF for in another window
Topics: Pressure , Rails , Surface roughness , Wheels , Stress , Sands
n-Point Asperity Model for Contact Between Nominally Flat Surfaces
A. Hariri, J. W. Zu, R. Ben Mrad
J. Tribol. July 2006, 128(3): 505–514. doi: https://doi.org/10.1115/1.2194915
View articletitled, <span class="inline-formula no-formula-id"><span class="mathFormula"></span><math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>n</mi></mrow></math></span>-Point Asperity Model for Contact Between Nominally Flat Surfaces
Open the PDF for in another window
Topics: Statistics , Surface roughness , Separation (Technology) , Probability , Geometry
A New Method Developed for Fractal Dimension and Topothesy Varying With the Mean Separation of Two Contact Surfaces
Jeng Luen Liou, Jen Fin Lin
J. Tribol. July 2006, 128(3): 515–524. doi: https://doi.org/10.1115/1.2197839
View articletitled, A New Method Developed for Fractal Dimension and Topothesy Varying With the Mean Separation of Two Contact Surfaces
Open the PDF for in another window
Topics: Deformation , Dimensions , Fractals , Separation (Technology) , Stress , Surface roughness
Three-Dimensional Motion of Sliders Contacting Media
James Kiely, Yiao-Tee Hsia
J. Tribol. July 2006, 128(3): 525–533. doi: https://doi.org/10.1115/1.2194914
View articletitled, Three-Dimensional Motion of Sliders Contacting Media
Open the PDF for in another window
Topics: Air bearings , Disks , Dynamics (Mechanics) , Vibration , Spectra (Spectroscopy) , Friction , Emission spectroscopy , Spectroscopy
A Thermohydrodynamic Analysis of Foil Journal Bearings
Z-C. Peng, M. M. Khonsari
J. Tribol. July 2006, 128(3): 534–541. doi: https://doi.org/10.1115/1.2197526
View articletitled, A Thermohydrodynamic Analysis of Foil Journal Bearings
Open the PDF for in another window
Topics: Bearings , Foil bearings , Temperature , Thermohydrodynamics , Journal bearings
Bump Foil Damping Using a Simplified Model
Erik E. Swanson
J. Tribol. July 2006, 128(3): 542–550. doi: https://doi.org/10.1115/1.2197838
View articletitled, Bump Foil Damping Using a Simplified Model
Open the PDF for in another window
Topics: Damping , Friction , Stiffness , Stress , Excitation , Coulombs , Foil bearings
Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation
Luis San Andrés
J. Tribol. July 2006, 128(3): 551–558. doi: https://doi.org/10.1115/1.2194918
View articletitled, Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation
Open the PDF for in another window
Topics: Bearings , Bending (Stress) , Damping , Gas bearings , Pressure , Rotors , Stiffness , Flow (Dynamics) , Stress , Hydrostatics
Numerical Simulations of the Flow Field Around the Rings of Mechanical Seals
Zhaogao Luan, M. M. Khonsari
J. Tribol. July 2006, 128(3): 559–565. doi: https://doi.org/10.1115/1.2197845
View articletitled, Numerical Simulations of the Flow Field Around the Rings of Mechanical Seals
Open the PDF for in another window
Topics: Flow (Dynamics) , Pressure , Cooling , Fluids
The Effect of Inertia on Radial Flows—Application to Hydrostatic Seals
Noël Brunetière, Bernard Tournerie
J. Tribol. July 2006, 128(3): 566–574. doi: https://doi.org/10.1115/1.2195461
View articletitled, The Effect of Inertia on Radial Flows—Application to Hydrostatic Seals
Open the PDF for in another window
Topics: Disks , Flow (Dynamics) , Hydrostatics , Inertia (Mechanics) , Turbulence , Pressure , Fluid films , Leakage
Squeeze Effects in a Flat Liquid Bridge Between Parallel Solid Surfaces
Marie-Hélène Meurisse, Michel Querry
J. Tribol. July 2006, 128(3): 575–584. doi: https://doi.org/10.1115/1.2197525
View articletitled, Squeeze Effects in a Flat Liquid Bridge Between Parallel Solid Surfaces
Open the PDF for in another window
Topics: Bridges (Structures) , Pressure , Stress
On the Optimum Groove Geometry for Herringbone Grooved Journal Bearings
A. M. Gad, M. M. Nemat-Alla, A. A. Khalil, A. M. Nasr
J. Tribol. July 2006, 128(3): 585–593. doi: https://doi.org/10.1115/1.2197524
View articletitled, On the Optimum Groove Geometry for Herringbone Grooved Journal Bearings
Open the PDF for in another window
Topics: Bearings , Friction , Geometry , Journal bearings , Load bearing capacity , Pressure , Stiffness , Torque , Flow (Dynamics) , Machinery
Bifurcation Analysis of a Flexible Rotor Supported by Two Fluid-Film Journal Bearings
J. K. Wang, M. M. Khonsari
J. Tribol. July 2006, 128(3): 594–603. doi: https://doi.org/10.1115/1.2197842
View articletitled, Bifurcation Analysis of a Flexible Rotor Supported by Two Fluid-Film Journal Bearings
Open the PDF for in another window
Topics: Bearings , Bifurcation , Rotors , Stiffness , Journal bearings
Dynamic Analysis of Cage Behavior in a Tapered Roller Bearing
Tomoya Sakaguchi, Kazuyoshi Harada
J. Tribol. July 2006, 128(3): 604–611. doi: https://doi.org/10.1115/1.2197527
View articletitled, Dynamic Analysis of Cage Behavior in a Tapered Roller Bearing
Open the PDF for in another window
Topics: Rollers , Stress , Tapered roller bearings , Dynamic analysis , Whirls
Monitoring of Lubricant Film Failure in a Ball Bearing Using Ultrasound
Jie Zhang, Bruce W. Drinkwater, Rob S. Dwyer-Joyce
J. Tribol. July 2006, 128(3): 612–618. doi: https://doi.org/10.1115/1.2197848
View articletitled, Monitoring of Lubricant Film Failure in a Ball Bearing Using Ultrasound
Open the PDF for in another window
Topics: Ball bearings , Bearings , Failure , Lubricants , Reflectance , Ultrasound
Direct Observations of Emulsion Flow in Elastohydrodynamically Lubricated Contacts
Haixia Yang, Steven R. Schmid, Ronald A. Reich, Thomas J. Kasun
J. Tribol. July 2006, 128(3): 619–623. doi: https://doi.org/10.1115/1.2198211
View articletitled, Direct Observations of Emulsion Flow in Elastohydrodynamically Lubricated Contacts
Open the PDF for in another window
Topics: Drops , Emulsions , Flow (Dynamics) , Water
The Pressure-Viscosity Coefficient for Newtonian EHL Film Thickness With General Piezoviscous Response
Scott Bair, Yuchuan Liu, Q. Jane Wang
J. Tribol. July 2006, 128(3): 624–631. doi: https://doi.org/10.1115/1.2197846
View articletitled, The Pressure-Viscosity Coefficient for Newtonian EHL Film Thickness With General Piezoviscous Response
Open the PDF for in another window
Topics: Film thickness , Pressure , Viscosity , Simulation
Occurrence of a Noncentral Dimple in Squeezing EHL Contacts
F. Guo, M. Kaneta, J. Wang, H. Nishikawa, P. Yang
J. Tribol. July 2006, 128(3): 632–640. doi: https://doi.org/10.1115/1.2194919
View articletitled, Occurrence of a Noncentral Dimple in Squeezing EHL Contacts
Open the PDF for in another window
Topics: Elastohydrodynamic lubrication , Film thickness , Pressure , Stress , Steel , Lubricants
Effects of Differential Scheme and Mesh Density on EHL Film Thickness in Point Contacts
Yuchuan Liu, Q. Jane Wang, Wenzhong Wang, Yuanzhong Hu, Dong Zhu
J. Tribol. July 2006, 128(3): 641–653. doi: https://doi.org/10.1115/1.2194916
View articletitled, Effects of Differential Scheme and Mesh Density on EHL Film Thickness in Point Contacts
Open the PDF for in another window
Topics: Density , Film thickness , Flow (Dynamics) , Pressure

Technical Briefs

Study of the Anti-Wear Properties of Coconut Oil Using Quantum Chemical Calculations and Tribological Tests
N. H. Jayadas, K. Prabhakaran Nair
J. Tribol. July 2006, 128(3): 654–659. doi: https://doi.org/10.1115/1.2197853
View articletitled, Study of the Anti-Wear Properties of Coconut Oil Using Quantum Chemical Calculations and Tribological Tests
Open the PDF for in another window
Topics: Tribology , Wear , Electrons , Chain , Molecular orbitals , Iron , Carbon , Vegetable oils
Approximate Analytical Model for Hertzian Elliptical Contact Problems
J-F. Antoine, C. Visa, C. Sauvey, G. Abba
J. Tribol. July 2006, 128(3): 660–664. doi: https://doi.org/10.1115/1.2197850
View articletitled, Approximate Analytical Model for Hertzian Elliptical Contact Problems
Open the PDF for in another window
Topics: Approximation , Contact mechanics , Dimensions , Errors , Rolling bearings , Stiffness , Stress , Displacement , Elasticity , Geometry
Bifurcation Analysis of the Load/Unload Systems With Multiple Flying Height States
Pyung Hwang, Polina V. Khan
J. Tribol. July 2006, 128(3): 665–669. doi: https://doi.org/10.1115/1.2197852
View articletitled, Bifurcation Analysis of the Load/Unload Systems With Multiple Flying Height States
Open the PDF for in another window
Topics: Air bearings , Bifurcation , Disks , Dynamic systems , Equilibrium (Physics) , Stability , Stress , Pressure , Newton's method , Finite element analysis
Limits for High-Speed Operation of Gas Foil Bearings
Tae Ho Kim, Luis San Andrés
J. Tribol. July 2006, 128(3): 670–673. doi: https://doi.org/10.1115/1.2197851
View articletitled, Limits for High-Speed Operation of Gas Foil Bearings
Open the PDF for in another window
Topics: Bearings , Clearances (Engineering) , Deformation , Film thickness , Foil bearings , Manufacturing , Stiffness , Stress , Whirls , Rotors
Enhancing Tribological Conditions in Tube Hydroforming by Using Textured Tubes
Gracious Ngaile, Mark Gariety, Taylan Altan
J. Tribol. July 2006, 128(3): 674–676. doi: https://doi.org/10.1115/1.2197849
View articletitled, Enhancing Tribological Conditions in Tube Hydroforming by Using Textured Tubes
Open the PDF for in another window
Topics: Electrical discharge machining , Friction , Pressure , Surface texture , Tribology , Sands
Platform for Modeling the Boundary Lubrication of Nominally Flat Metallic Contacts
L. Chang
J. Tribol. July 2006, 128(3): 677–680. doi: https://doi.org/10.1115/1.2198209
View articletitled, Platform for Modeling the Boundary Lubrication of Nominally Flat Metallic Contacts
Open the PDF for in another window
Topics: Boundary lubrication , Modeling , Temperature , Lubrication
All Issues
Current-Voltage-Friction Characteristics of Grease in Electromechanically Loaded Sliding Contacts
J. Tribol
On the Study of Impact Plasto-Elastohydrodynamic Lubrication of Point Contact Problems Lubricated With Non-Newtonian Lubricant
J. Tribol (March 2025)
Evolution of Lubrication Characteristics of Double-Nut Ball Screws Based on an Efficient Surface Roughness Modeling Method
J. Tribol (March 2025)
Enhancing lubrication of electrified interfaces by inert gas atmosphere
J. Tribol
Numerical analysis of the Thermal EHL line contact problem under intermittent motion
J. Tribol
  • Online ISSN 1528-8897
  • Print ISSN 0742-4787

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

  • Crossref Logo
  • Crossref Open Funder Registry Logo
  • Crossref Open Cited-By Logo
  • Crossref Crossmark Logo
  • Crossref Similarity Check Logo
  • Chorus Logo
  • Counter Logo
  • Cope Logo
  • STM Logo
Copyright © 2024 The American Society of Mechanical Engineers
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept