This research investigates different dielectric barrier discharge (DBD) actuator configurations for affecting tip leakage flow and suppressing stall inception. Computational investigations were performed on a low speed rotor with a highly loaded tip region that was responsible for stall-onset. The actuator was mounted on the casing upstream of the rotor leading edge. Plasma injection had a significant impact on the predicted tip-gap flow and improved stall margin. The effect of changing the actuator forcing direction on stall margin was also studied. The reduction in stalling flow was closely correlated with a reduction in loading parameter that quantifies mechanisms responsible for end-wall blockage generation. The actuation reduced end-wall losses by increasing the static pressure of tip-gap flow emerging from blade suction-side. Lastly, an approximate speed scaling developed for the DBD force helped estimate force requirements for stall margin enhancement of transonic rotors.
Skip Nav Destination
Article navigation
March 2012
Research Papers
Control of Tip-Clearance Flow in a Low Speed Axial Compressor Rotor With Plasma Actuation
Robert C. Murray,
Robert C. Murray
GE Global Research
, Niskayuna, NY 12309
Search for other works by this author on:
Katherine Essenhigh,
Katherine Essenhigh
GE Global Research
, Niskayuna, NY 12309
Search for other works by this author on:
Grover A. Bennett,
Grover A. Bennett
GE Global Research
, Niskayuna, NY 12309
Search for other works by this author on:
Seyed Saddoughi,
Seyed Saddoughi
GE Global Research
, Niskayuna, NY 12309
Search for other works by this author on:
Aspi Wadia,
Aspi Wadia
GE Aviation
, West Chester, OH 45069
Search for other works by this author on:
Andrew Breeze-Stringfellow
Andrew Breeze-Stringfellow
GE Aviation
, West Chester, OH 45069
Search for other works by this author on:
Giridhar Jothiprasad
Robert C. Murray
GE Global Research
, Niskayuna, NY 12309
Katherine Essenhigh
GE Global Research
, Niskayuna, NY 12309
Grover A. Bennett
GE Global Research
, Niskayuna, NY 12309
Seyed Saddoughi
GE Global Research
, Niskayuna, NY 12309
Aspi Wadia
GE Aviation
, West Chester, OH 45069
Andrew Breeze-Stringfellow
GE Aviation
, West Chester, OH 45069J. Turbomach. Mar 2012, 134(2): 021019 (9 pages)
Published Online: June 29, 2011
Article history
Received:
July 12, 2010
Revised:
August 22, 2010
Online:
June 29, 2011
Published:
June 29, 2011
Citation
Jothiprasad, G., Murray, R. C., Essenhigh, K., Bennett, G. A., Saddoughi, S., Wadia, A., and Breeze-Stringfellow, A. (June 29, 2011). "Control of Tip-Clearance Flow in a Low Speed Axial Compressor Rotor With Plasma Actuation." ASME. J. Turbomach. March 2012; 134(2): 021019. https://doi.org/10.1115/1.4003083
Download citation file:
Get Email Alerts
A Study of Loss Model Parameter Sensitivity in Compressor Unsteady Flow Simulations
J. Turbomach (May 2025)
Noise Source Identification for the Unsteady Low-Pressure Turbine Flow Fields
J. Turbomach (May 2025)
Related Articles
Early Stall Warning Technique for Axial-Flow Compressors
J. Turbomach (July,2007)
The Tip Clearance Flow Resonance Behind Axial Compressor Nonsynchronous Vibration
J. Turbomach (October,2011)
Related Proceedings Papers
Related Chapters
Aerodynamic Performance Analysis
Axial-Flow Compressors
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential