Skip Nav Destination
Issues
March 2013
ISSN 0889-504X
EISSN 1528-8900
In this Issue
Research Papers
The Effects of Ribs and Tip Wall Distance on Heat Transfer for a Varying Aspect Ratio Two-Pass Ribbed Internal Cooling Channel
Sean C. Jenkins, Frank Zehnder, Igor V. Shevchuk, Jens von Wolfersdorf, Bernhard Weigand, Martin Schnieder
J. Turbomach. March 2013, 135(2): 021001.
doi: https://doi.org/10.1115/1.4006584
Topics:
Heat transfer
,
Cooling
,
Flow (Dynamics)
,
Pressure
,
Liquid crystals
Aerothermal Investigation of Backface Clearance Flow in Deeply Scalloped Radial Turbines
J. Turbomach. March 2013, 135(2): 021002.
doi: https://doi.org/10.1115/1.4006664
Topics:
Clearances (Engineering)
,
Flow (Dynamics)
,
Turbines
,
Blades
,
Pressure
Time-Dependent Deposition Characteristics of Fine Coal Fly Ash in a Laboratory Gas Turbine Environment
J. Turbomach. March 2013, 135(2): 021003.
doi: https://doi.org/10.1115/1.4006639
Topics:
Coal
,
Fly ash
,
Gas turbines
,
Particulate matter
,
Surface roughness
,
Temperature
,
Viscosity
,
Flow (Dynamics)
Validation of Numerical Simulation for Rotating Stall in a Transonic Fan
J. Turbomach. March 2013, 135(2): 021004.
doi: https://doi.org/10.1115/1.4006641
Topics:
Blades
,
Flow (Dynamics)
,
Pressure
,
Stall inception
,
Computer simulation
,
Simulation
,
Numerical analysis
Three-Dimensional RANS Prediction of Gas-Side Heat Transfer Coefficients on Turbine Blade and Endwall
J. Turbomach. March 2013, 135(2): 021005.
doi: https://doi.org/10.1115/1.4006642
Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetric Flow Control—Part I: Non-Axisymmetrical Flow in Centrifugal Compressor
Mingyang Yang, Xinqian Zheng, Yangjun Zhang, Takahiro Bamba, Hideaki Tamaki, Joern Huenteler, Zhigang Li
J. Turbomach. March 2013, 135(2): 021006.
doi: https://doi.org/10.1115/1.4006636
Topics:
Compressors
,
Flow (Dynamics)
,
Impellers
,
Pressure
,
Diffusers
,
Surges
,
Blades
Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetrical Flow Control—Part II: Nonaxisymmetrical Self-Recirculation Casing Treatment
J. Turbomach. March 2013, 135(2): 021007.
doi: https://doi.org/10.1115/1.4006637
Topics:
Compressors
,
Flow (Dynamics)
,
Pressure
,
Stability
,
Surges
,
Blades
,
Turbochargers
,
Flow control
,
Geometry
,
Impellers
Robust Analysis of Design in Vibration of Turbomachines
J. Turbomach. March 2013, 135(2): 021008.
doi: https://doi.org/10.1115/1.4007442
Topics:
Blades
,
Damping
,
Design
,
Disks
,
Stiffness
,
Uncertainty
,
Turbomachinery
,
Vibration
,
Shapes
Improved Trench Film Cooling With Shaped Trench Outlets
J. Turbomach. March 2013, 135(2): 021009.
doi: https://doi.org/10.1115/1.4006606
Topics:
Coolants
,
Cooling
,
Film cooling
,
Flow (Dynamics)
,
Computational fluid dynamics
,
Flat plates
Heat Transfer in an Oblique Jet Impingement Configuration With Varying Jet Geometries
J. Turbomach. March 2013, 135(2): 021010.
doi: https://doi.org/10.1115/1.4006598
Topics:
Flow (Dynamics)
,
Heat transfer
,
Jets
Evaluation of Heat Transfer Effects on Turbocharger Performance
J. Turbomach. March 2013, 135(2): 021011.
doi: https://doi.org/10.1115/1.4006608
Topics:
Compressors
,
Flow (Dynamics)
,
Heat transfer
,
Turbines
,
Turbochargers
,
Cooling
,
Pressure
Experimental Measurements of Ingestion Through Turbine Rim Seals—Part I: Externally Induced Ingress
J. Turbomach. March 2013, 135(2): 021012.
doi: https://doi.org/10.1115/1.4006609
Topics:
Annulus
,
Clearances (Engineering)
,
Engines
,
Flow (Dynamics)
,
Pressure
,
Sealing (Process)
,
Turbines
,
Wheels
,
Blades
,
Design
Experimental Measurements of Ingestion Through Turbine Rim Seals—Part II: Rotationally Induced Ingress
J. Turbomach. March 2013, 135(2): 021013.
doi: https://doi.org/10.1115/1.4006586
Topics:
Clearances (Engineering)
,
Flow (Dynamics)
,
Sealing (Process)
,
Wheels
,
Turbines
Statistical and Theoretical Models of Ingestion Through Turbine Rim Seals
J. Turbomach. March 2013, 135(2): 021014.
doi: https://doi.org/10.1115/1.4006601
Topics:
Clearances (Engineering)
,
Fittings
,
Flow (Dynamics)
,
Maximum likelihood estimation
,
Pressure
,
Sealing (Process)
,
Turbines
,
Wheels
,
Annulus
,
Engines
Vaned Diffuser Induced Impeller Blade Vibrations in a High-Speed Centrifugal Compressor
J. Turbomach. March 2013, 135(2): 021015.
doi: https://doi.org/10.1115/1.4007515
Topics:
Blades
,
Compressors
,
Diffusers
,
Impellers
,
Simulation
,
Pressure
,
Damping
,
Flow (Dynamics)
Film Cooling Extraction Effects on the Aero-Thermal Characteristics of Rib Roughened Cooling Channel Flow
J. Turbomach. March 2013, 135(2): 021016.
doi: https://doi.org/10.1115/1.4007501
Topics:
Cooling
,
Film cooling
,
Flow (Dynamics)
,
Heat transfer
,
Suction
,
Fluids
,
Temperature
,
Heat flux
Constrained Adjoint-Based Aerodynamic Shape Optimization of a Single-Stage Transonic Compressor
J. Turbomach. March 2013, 135(2): 021017.
doi: https://doi.org/10.1115/1.4007502
Topics:
Compressors
,
Design
,
Flow (Dynamics)
,
Optimization
,
Rotors
,
Stators
,
Pressure
,
Shape optimization
,
Boundary-value problems
A Path Toward the Aerodynamic Robust Design of Low Pressure Turbines
J. Turbomach. March 2013, 135(2): 021018.
doi: https://doi.org/10.1115/1.4007519
Topics:
Computational fluid dynamics
,
Design
,
Flow (Dynamics)
,
Optimization
,
Robustness
,
Airfoils
,
Turbines
,
Engines
,
Blades
,
Pressure
Leading Edge Shielding Concept in Gas Turbines With Can Combustors
J. Turbomach. March 2013, 135(2): 021019.
doi: https://doi.org/10.1115/1.4007514
Topics:
Combustion chambers
,
Coolants
,
Cooling
,
Design
,
Flow (Dynamics)
,
Gas turbines
,
Pressure
,
Leakage
,
Turbines
,
Temperature
Secondary Flow Loss Reduction Through Blowing for a High-Lift Front-Loaded Low Pressure Turbine Cascade
J. Turbomach. March 2013, 135(2): 021020.
doi: https://doi.org/10.1115/1.4007531
Topics:
Blades
,
Flow (Dynamics)
,
Flow control
,
Pressure
,
Reynolds number
,
Vortices
,
Suction
,
Cascades (Fluid dynamics)
,
Momentum
,
Turbines
Determination of Time Resolved Heat Transfer Coefficient and Adiabatic Effectiveness Waveforms With Unsteady Film
J. Turbomach. March 2013, 135(2): 021021.
doi: https://doi.org/10.1115/1.4007545
Multidisciplinary Optimization of a Turbocharger Radial Turbine
J. Turbomach. March 2013, 135(2): 021022.
doi: https://doi.org/10.1115/1.4007507
Topics:
Blades
,
Design
,
Flow (Dynamics)
,
Impellers
,
Optimization
,
Turbines
,
Stress
,
Inertia (Mechanics)
,
Turbochargers
,
Mach number
An Explanation for Flow Features of Spike-Type Stall Inception in an Axial Compressor Rotor
J. Turbomach. March 2013, 135(2): 021023.
doi: https://doi.org/10.1115/1.4007570
Topics:
Blades
,
Compressors
,
Flow (Dynamics)
,
Pressure
,
Rotors
,
Stall inception
,
Vortices
Characteristics of Turbulence in a Turbofan Stage
J. Turbomach. March 2013, 135(2): 021024.
doi: https://doi.org/10.1115/1.4006774
Topics:
Energy dissipation
,
Flow (Dynamics)
,
Turbulence
,
Kinetic energy
,
Turbofans
,
Wire
Heat Transfer in Turbine Hub Cavities Adjacent to the Main Gas Path
J. Turbomach. March 2013, 135(2): 021025.
doi: https://doi.org/10.1115/1.4006824
Topics:
Annulus
,
Cavities
,
Computational fluid dynamics
,
Cooling
,
Flow (Dynamics)
,
Stators
,
Temperature
,
Turbines
,
Heat transfer
,
Disks
Effects of Vortex Generator Application on the Performance of a Compressor Cascade
J. Turbomach. March 2013, 135(2): 021026.
doi: https://doi.org/10.1115/1.4006605
Topics:
Blades
,
Cascades (Fluid dynamics)
,
Flow (Dynamics)
,
Generators
,
Vortices
,
Pressure
,
Compressors
Heat Transfer for the Film-Cooled Vane of a 1-1/2 Stage High-Pressure Transonic Turbine—Part I: Experimental Configuration and Data Review With Inlet Temperature Profile Effects
J. Turbomach. March 2013, 135(2): 021027.
doi: https://doi.org/10.1115/1.4006775
Topics:
Cooling
,
Flow (Dynamics)
,
Heat flux
,
Heat transfer
,
Temperature
,
Temperature profiles
,
Airfoils
,
Pressure
,
Turbines
,
Coolants
Heat Transfer for the Film-Cooled Vane of a 1-1/2 Stage High-Pressure Transonic Turbine—Part II: Effect of Cooling Variation on the Vane Airfoil and Inner End Wall
J. Turbomach. March 2013, 135(2): 021028.
doi: https://doi.org/10.1115/1.4006776
Topics:
Cooling
,
Flow (Dynamics)
,
Heat transfer
,
Airfoils
,
Coolants
Effects of Pin Detached Space on Heat Transfer in a Rib Roughened Channel
J. Turbomach. March 2013, 135(2): 021029.
doi: https://doi.org/10.1115/1.4006567
Topics:
Fins
,
Heat transfer
,
Heat transfer coefficients
,
Pressure
Numerical and Experimental Investigations of a Compressor Cascade Flow With Secondary Air Removal
J. Turbomach. March 2013, 135(2): 021030.
doi: https://doi.org/10.1115/1.4006570
Topics:
Blades
,
Flow (Dynamics)
,
Pressure
,
Compressors
,
Design
,
Vortices
,
Computational fluid dynamics
,
Turbulence
,
Cascades (Fluid dynamics)
Numerical and Experimental Analysis of the Effect of Variable Blade Row Spacing in a Subsonic Axial Turbine
J. Turbomach. March 2013, 135(2): 021031.
doi: https://doi.org/10.1115/1.4006587
Blade Loading and Its Application in the Mean-Line Design of Low Pressure Turbines
J. Turbomach. March 2013, 135(2): 021032.
doi: https://doi.org/10.1115/1.4006588
Topics:
Blades
,
Design
,
Flow (Dynamics)
,
Reynolds number
,
Turbines
,
Pressure
Coal Ash Deposition on Nozzle Guide Vanes—Part I: Experimental Characteristics of Four Coal Ash Types
J. Turbomach. March 2013, 135(2): 021033.
doi: https://doi.org/10.1115/1.4006571
Topics:
Coal
,
Film cooling
,
Flow (Dynamics)
,
Nozzle guide vanes
,
Particulate matter
,
Temperature
,
Turbines
,
Fly ash
,
Pressure
A Method to Estimate the Performance Map of a Centrifugal Compressor Stage
J. Turbomach. March 2013, 135(2): 021034.
doi: https://doi.org/10.1115/1.4006590
Topics:
Compressors
,
Flow (Dynamics)
,
Mach number
,
Turbochargers
,
Design
,
Impellers
Effect of Bend Geometry on Heat Transfer and Pressure Drop in a Two-Pass Coolant Square Channel for a Turbine
J. Turbomach. March 2013, 135(2): 021035.
doi: https://doi.org/10.1115/1.4006665
Topics:
Design
,
Flow (Dynamics)
,
Geometry
,
Heat transfer
,
Pressure drop
,
Symmetry (Physics)
,
Turning vanes
,
Heat transfer coefficients
Analysis of Axial Compressor Stall Inception Using Unsteady Casing Pressure Measurements
J. Turbomach. March 2013, 135(2): 021036.
doi: https://doi.org/10.1115/1.4006777
Topics:
Compressors
,
Stall inception
,
Rotors
,
Sensors
,
Pressure
,
Filtration
,
Wavelets
Study of Unforced and Modulated Film-Cooling Jets Using Proper Orthogonal Decomposition—Part I: Unforced Jets
J. Turbomach. March 2013, 135(2): 021037.
doi: https://doi.org/10.1115/1.4006599
Study of Unforced and Modulated Film-Cooling Jets Using Proper Orthogonal Decomposition—Part II: Forced Jets
J. Turbomach. March 2013, 135(2): 021038.
doi: https://doi.org/10.1115/1.4006600
Topics:
Cycles
,
Film cooling
,
Flow (Dynamics)
,
Principal component analysis
,
Temperature
,
Jets
,
Vortices
,
Cross-flow
,
Transients (Dynamics)
Understanding the Twin Scroll Turbine: Flow Similarity
J. Turbomach. March 2013, 135(2): 021039.
doi: https://doi.org/10.1115/1.4006607
Topics:
Flow (Dynamics)
,
Turbines
,
Pressure
,
Temperature
,
Mach number
HP Vane Aerodynamics and Heat Transfer in the Presence of Aggressive Inlet Swirl
J. Turbomach. March 2013, 135(2): 021040.
doi: https://doi.org/10.1115/1.4006610
Topics:
Flow (Dynamics)
,
Heat transfer
,
Nozzle guide vanes
,
Vortices
,
Turbines
,
Pressure
,
Combustion chambers
Technical Briefs
Mechanisms and Key Parameters for Compressor Blade Stall Flutter
J. Turbomach. March 2013, 135(2): 024501.
doi: https://doi.org/10.1115/1.4007441
Topics:
Blades
,
Compressors
,
Flutter (Aerodynamics)
,
Rotors
Errata
Erratum: “On the Phenomenon of Pressure Pulses Reflecting Between Blades of Adjacent Blade Rows of Turbomachines,” [ASME J. Turbomach., 2011, 133, 021016]
J. Turbomach. March 2013, 135(2): 027001.
doi: https://doi.org/10.1115/1.4007830
Topics:
Blades
,
Pressure
,
Turbomachinery