The electromechanical interaction in cage induction motors induces additional forces between the rotor and stator. Recently, a linear parametric model was presented for these forces and the model was validated experimentally. The effective identification of the model parameters is crucial, because the electromagnetic system is nonlinear. The aim of this study was to present how to apply the impulse response method to estimate the required parameters. The numerical results show that this method is very effective. In addition, the force model was combined with a mechanical rotor model and the feasibility for electromechanical rotor problems was demonstrated.
Issue Section:
Technical Papers
1.
Fru¨chtenicht
, J.
, Jordan
, H.
, and Seinsch
, H. O.
, 1982
, “Exzentrizita¨tsfelder als Ursache von Laufinstabilita¨ten bei Asynchronmaschinen, Teil I und II
” Archive fu¨r Electrotechnik
, 65
, pp. 271
–292
.2.
Belmans
, R.
, Vandenput
, A.
, and Geysen
, W.
, 1987
, “Calculation of the Flux Density and the Unbalanced Pull in Two Pole Induction Machines
,” Archive fu¨r Electrotechnik
, 70
, pp. 151
–161
.3.
Skubov
, D.
, and Shumakovich
, I. V.
, 1999
, “Stability of the Rotor of an Induction Motor in the Magnetic Field of the Current Windings
,” Mech. Solids
34
(4
), pp. 28
–40
. (Translated from Mekhanika Tverdogo Tela, 4, pp. 36–50, 1999)4.
Arkkio
, A.
, Antila
, M.
, Pokki
, K.
, Simon
, A.
, and Lantto
, E.
, 2000
, “Electromagnetic Force on a Whirling Cage Rotor
,” IEE Proceedings–Electric Power Applications
, 147
(5
), pp. 353
–360
.5.
Holopainen, T. P., Tenhunen, A., and Arkkio, A., 2002, “Electromagnetic Circulatory Forces and Rotordynamic Instability in Electric Machines,” Proceedings, 6th International Conference on Rotor Dynamics, E. J. Hahn, and R. B. Randall, eds., University of New South Wales Printing Services, Sydney, Australia, Vol. 1, pp. 446–463.
6.
Holopainen, T. P., Tenhunen, A., and Arkkio, A., 2002, “Electromechanical Interaction in Rotor Vibrations of Electric Machines,” Proceedings, 5th World Congress on Computational Mechanics, H. A., Mang, F. G. Rammerstorfer, and J., Eberhardsteiner, eds., Vienna University of Technology, Vienna, Austria, 10 p, http://wccm.tuwien.ac.at.
7.
Tenhunen, A., Holopainen, T. P., and Arkkio, A., 2003, “Impulse Method to Calculate the Frequency Response of the Electromagnetic Forces on Whirling Cage Rotors,” IEE Proceedings–Electric Power Applications, 150(6), pp. 752–756.
8.
Tenhunen
, A.
, Holopainen
, T. P.
, and Arkkio
, A.
, 2003
, “Spatial Linearity of Unbalanced Magnetic Pull in Induction Motors During Eccentric Rotor Motions
,” The International Journal for Computation and Mathematics in Electrical and Electronic Engineering
, 22
(4
), pp. 862
–876
.9.
Arkkio
, A.
, 1987
, “Analysis of Induction Motors Based on the Numerical Solution of the Magnetic Field and Circuit Equations
,” Acta Polytechnica Scandinavia, Electrical Engineering Series, No. 59, Finnish Academy of Technology, Helsinki, http://lib.hut.fi/Diss10.
Coulomb
, J. L.
, 1983
, “A Methodology for the Determination of Global Electromechanical Quantities from a Finite Element Analysis and its Application to the Evaluation of Magnetic Forces, Torques and Stiffness
,” IEEE Trans. Magn.
19
(6
), pp. 2514
–2519
.11.
Meirovitch, L., 1997, Principles and Techniques of Vibrations, Prentice Hall, New Jersey.
12.
Ewins, D. J., 2000, Modal Testing: Theory, Practice and Application, 2nd ed., Research Studies Press Ltd., Hertfordshire, England.
Copyright © 2004
by ASME
You do not currently have access to this content.